chown: changing ownership of '/home/autobuild/autobuild/instance-15/output-1/target/var/run/tpm2-tss/eventlog': Operation not permitted chown: changing ownership of '/home/autobuild/autobuild/instance-15/output-1/target/var/run/tpm2-tss': Operation not permitted make[3]: [Makefile:31708: install-dirs] Error 1 (ignored) chown: changing ownership of '/home/autobuild/autobuild/instance-15/output-1/target/var/lib/tpm2-tss/system/keystore': Operation not permitted chown: changing ownership of '/home/autobuild/autobuild/instance-15/output-1/target/var/lib/tpm2-tss/system': Operation not permitted chown: changing ownership of '/home/autobuild/autobuild/instance-15/output-1/target/var/lib/tpm2-tss': Operation not permitted WARNING Failed to create the FAPI directories with the correct permissions call check_fapi_dirs if [ ! -z "" ]; then \ mv /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/udev/rules.d/tpm-udev.rules /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/udev/rules.d/tpm-udev.rules; \ fi make[3]: Leaving directory '/home/autobuild/autobuild/instance-15/output-1/build/tpm2-tss-3.2.2' make[2]: Leaving directory '/home/autobuild/autobuild/instance-15/output-1/build/tpm2-tss-3.2.2' make[1]: Leaving directory '/home/autobuild/autobuild/instance-15/output-1/build/tpm2-tss-3.2.2' >>> tpm2-totp 0.2.1 Downloading wget --passive-ftp -nd -t 3 -O '/home/autobuild/autobuild/instance-15/output-1/build/.tpm2-totp-0.2.1.tar.gz.5AQx1w/output' 'https://github.com/tpm2-software/tpm2-totp/releases/download/v0.2.1/tpm2-totp-0.2.1.tar.gz' --2024-02-07 06:56:30-- https://github.com/tpm2-software/tpm2-totp/releases/download/v0.2.1/tpm2-totp-0.2.1.tar.gz Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt' Resolving github.com (github.com)... 140.82.112.4 Connecting to github.com (github.com)|140.82.112.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://objects.githubusercontent.com/github-production-release-asset-2e65be/167222458/6899d780-2995-11ea-8acb-3dfb304e48e0?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAVCODYLSA53PQK4ZA%2F20240207%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240207T065631Z&X-Amz-Expires=300&X-Amz-Signature=745090cc16da9693fdee3839cb76a9fca8bb4e8a9694062188bb2111efb004e2&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=167222458&response-content-disposition=attachment%3B%20filename%3Dtpm2-totp-0.2.1.tar.gz&response-content-type=application%2Foctet-stream [following] --2024-02-07 06:56:31-- https://objects.githubusercontent.com/github-production-release-asset-2e65be/167222458/6899d780-2995-11ea-8acb-3dfb304e48e0?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAVCODYLSA53PQK4ZA%2F20240207%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240207T065631Z&X-Amz-Expires=300&X-Amz-Signature=745090cc16da9693fdee3839cb76a9fca8bb4e8a9694062188bb2111efb004e2&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=167222458&response-content-disposition=attachment%3B%20filename%3Dtpm2-totp-0.2.1.tar.gz&response-content-type=application%2Foctet-stream Resolving objects.githubusercontent.com (objects.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ... Connecting to objects.githubusercontent.com (objects.githubusercontent.com)|185.199.108.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 427226 (417K) [application/octet-stream] Saving to: '/home/autobuild/autobuild/instance-15/output-1/build/.tpm2-totp-0.2.1.tar.gz.5AQx1w/output' 0K .......... .......... .......... .......... .......... 11% 11.5M 0s 50K .......... .......... .......... .......... .......... 23% 12.8M 0s 100K .......... .......... .......... .......... .......... 35% 23.2M 0s 150K .......... .......... .......... .......... .......... 47% 32.8M 0s 200K .......... .......... .......... .......... .......... 59% 32.5M 0s 250K .......... .......... .......... .......... .......... 71% 123M 0s 300K .......... .......... .......... .......... .......... 83% 10.9M 0s 350K .......... .......... .......... .......... .......... 95% 174M 0s 400K .......... ....... 100% 295M=0.02s 2024-02-07 06:56:31 (22.2 MB/s) - '/home/autobuild/autobuild/instance-15/output-1/build/.tpm2-totp-0.2.1.tar.gz.5AQx1w/output' saved [427226/427226] tpm2-totp-0.2.1.tar.gz: OK (sha256: 0b2b63cc7ea74f5a6952f2cd689896c08f6b94ee6865f48af609f9a8ac247dc1) >>> tpm2-totp 0.2.1 Extracting gzip -d -c /home/autobuild/autobuild/instance-15/dl/tpm2-totp/tpm2-totp-0.2.1.tar.gz | /home/autobuild/autobuild/instance-15/output-1/host/bin/tar --strip-components=1 -C /home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1 -xf - >>> tpm2-totp 0.2.1 Patching >>> tpm2-totp 0.2.1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> tpm2-totp 0.2.1 Patching libtool patching file /home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1/build-aux/ltmain.sh Hunk #1 succeeded at 2908 (offset 221 lines). Hunk #2 succeeded at 4498 (offset 221 lines). Hunk #3 succeeded at 6794 (offset 240 lines). Hunk #4 succeeded at 6804 (offset 240 lines). Hunk #5 succeeded at 7097 (offset 240 lines). Hunk #6 succeeded at 7389 (offset 240 lines). Hunk #7 succeeded at 8359 (offset 247 lines). Hunk #8 succeeded at 10991 (offset 281 lines). >>> tpm2-totp 0.2.1 Configuring (cd /home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1/ && rm -rf config.cache && GIT_DIR=. PATH="/home/autobuild/autobuild/instance-15/output-1/host/bin:/home/autobuild/autobuild/instance-15/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" AR="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-ar" AS="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-as" LD="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-ld" NM="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-nm" CC="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc" GCC="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc" CPP="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-cpp" CXX="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-g++" FC="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gfortran" F77="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gfortran" RANLIB="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-ranlib" READELF="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-readelf" STRIP="/bin/true" OBJCOPY="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-objcopy" OBJDUMP="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/autobuild/autobuild/instance-15/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-15/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-15/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/autobuild/autobuild/instance-15/output-1/host/lib -Wl,-rpath,/home/autobuild/autobuild/instance-15/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-as" DEFAULT_LINKER="/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1" LDFLAGS="" FCFLAGS=" -O3 -g0" FFLAGS=" -O3 -g0" PKG_CONFIG="/home/autobuild/autobuild/instance-15/output-1/host/bin/pkg-config" STAGING_DIR="/home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1 -std=c99" ac_cv_path_PANDOC='' CONFIG_SITE=/dev/null ./configure --target=or1k-buildroot-linux-gnu --host=or1k-buildroot-linux-gnu --build=aarch64-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --enable-shared --disable-defaultflags --disable-doxygen-doc --disable-plymouth --without-initramfstoolsdir --without-mkinitcpiodir ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking build system type... aarch64-unknown-linux-gnu checking host system type... or1k-buildroot-linux-gnu checking target system type... or1k-buildroot-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for or1k-buildroot-linux-gnu-strip... /bin/true checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether to enable maintainer-specific portions of Makefiles... yes checking whether to enable debugging... no checking whether make supports the include directive... yes (GNU style) checking for or1k-buildroot-linux-gnu-gcc... /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc accepts -g... yes checking for /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc option to accept ISO C89... none needed checking whether /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc understands -c and -o together... yes checking dependency style of /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc... none checking how to run the C preprocessor... /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-cpp checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for or1k-buildroot-linux-gnu-gcc... (cached) /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc checking whether we are using the GNU C compiler... (cached) yes checking whether /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc accepts -g... (cached) yes checking for /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc option to accept ISO C89... (cached) none needed checking whether /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc understands -c and -o together... (cached) yes checking dependency style of /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc... (cached) none checking for /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc option to accept ISO C99... none needed checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc... /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-ld checking if the linker (/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-nm checking the name lister (/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert aarch64-unknown-linux-gnu file names to or1k-buildroot-linux-gnu format... func_convert_file_noop checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-ld option to reload object files... -r checking for or1k-buildroot-linux-gnu-objdump... /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-objdump checking how to recognize dependent libraries... pass_all checking for or1k-buildroot-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for or1k-buildroot-linux-gnu-ar... /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-ar checking for archiver @FILE support... @ checking for or1k-buildroot-linux-gnu-strip... (cached) /bin/true checking for or1k-buildroot-linux-gnu-ranlib... /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-ranlib checking command to parse /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-nm output from /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for or1k-buildroot-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no checking for /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc option to produce PIC... -fPIC -DPIC checking if /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes checking if /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc static flag -static works... yes checking if /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc supports -c -o file.o... yes checking if /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc supports -c -o file.o... (cached) yes checking whether the /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc linker (/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether to build with code coverage support... no checking pkg-config is at least version 0.25... yes checking for TSS2_ESYS... yes checking for TSS2_MU... yes checking for TSS2_TCTILDR... yes checking for QRENCODE... yes configure: WARNING: Required executable doxygen not found, man pages will not be built checking for pandoc... (cached) no configure: WARNING: Required executable pandoc not found, man pages will not be built checking for lsinitramfs... no checking for mkinitcpio... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating Doxyfile config.status: creating dist/tpm2-totp.pc config.status: creating dist/dracut/module-setup.sh config.status: creating dist/initramfs-tools/hooks/tpm2-totp config.status: creating dist/initcpio/install/tpm2-totp config.status: creating dist/initcpio/install/plymouth-tpm2-totp config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls tpm2-totp 0.2.1 doxygen: pandoc: dracut: initramfs-tools: no mkinitcpio: no plymouth: no >>> tpm2-totp 0.2.1 Building GIT_DIR=. PATH="/home/autobuild/autobuild/instance-15/output-1/host/bin:/home/autobuild/autobuild/instance-15/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /home/autobuild/make/make -j1 -C /home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1/ make[1]: Entering directory '/home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1' Makefile:2258: warning: overriding recipe for target 'dist-hook' Makefile:2250: warning: ignoring old recipe for target 'dist-hook' CC src/tpm2_totp-tpm2-totp.o CC src/libtpm2-totp.lo CCLD libtpm2-totp.la CCLD tpm2-totp make[1]: Leaving directory '/home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1' >>> tpm2-totp 0.2.1 Installing to target GIT_DIR=. PATH="/home/autobuild/autobuild/instance-15/output-1/host/bin:/home/autobuild/autobuild/instance-15/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /home/autobuild/make/make -j1 DESTDIR=/home/autobuild/autobuild/instance-15/output-1/target install -C /home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1/ make[1]: Entering directory '/home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1' Makefile:2258: warning: overriding recipe for target 'dist-hook' Makefile:2250: warning: ignoring old recipe for target 'dist-hook' make[2]: Entering directory '/home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1' Makefile:2258: warning: overriding recipe for target 'dist-hook' Makefile:2250: warning: ignoring old recipe for target 'dist-hook' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-15/output-1/target/usr/lib' /bin/sh ./libtool --mode=install /usr/bin/install -c libtpm2-totp.la '/home/autobuild/autobuild/instance-15/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libtpm2-totp.so.0.0.0 /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/libtpm2-totp.so.0.0.0 libtool: install: (cd /home/autobuild/autobuild/instance-15/output-1/target/usr/lib && { ln -s -f libtpm2-totp.so.0.0.0 libtpm2-totp.so.0 || { rm -f libtpm2-totp.so.0 && ln -s libtpm2-totp.so.0.0.0 libtpm2-totp.so.0; }; }) libtool: install: (cd /home/autobuild/autobuild/instance-15/output-1/target/usr/lib && { ln -s -f libtpm2-totp.so.0.0.0 libtpm2-totp.so || { rm -f libtpm2-totp.so && ln -s libtpm2-totp.so.0.0.0 libtpm2-totp.so; }; }) libtool: install: /usr/bin/install -c .libs/libtpm2-totp.lai /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/libtpm2-totp.la libtool: install: /usr/bin/install -c .libs/libtpm2-totp.a /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/libtpm2-totp.a libtool: install: chmod 644 /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/libtpm2-totp.a libtool: install: /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-ranlib /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/libtpm2-totp.a libtool: warning: remember to run 'libtool --finish /usr/lib' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-15/output-1/target/usr/bin' /bin/sh ./libtool --mode=install /usr/bin/install -c tpm2-totp '/home/autobuild/autobuild/instance-15/output-1/target/usr/bin' libtool: install: /usr/bin/install -c tpm2-totp /home/autobuild/autobuild/instance-15/output-1/target/usr/bin/tpm2-totp /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-15/output-1/target/usr/include' /usr/bin/install -c -m 644 include/tpm2-totp.h '/home/autobuild/autobuild/instance-15/output-1/target/usr/include' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-15/output-1/target/usr/share/man/man1' /usr/bin/install -c -m 644 man/man1/tpm2-totp.1 '/home/autobuild/autobuild/instance-15/output-1/target/usr/share/man/man1' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-15/output-1/target/usr/share/man/man3' /usr/bin/install -c -m 644 doxygen-doc/man/man3/tpm2-totp.3 '/home/autobuild/autobuild/instance-15/output-1/target/usr/share/man/man3' /usr/bin/mkdir -p '/home/autobuild/autobuild/instance-15/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c -m 644 dist/tpm2-totp.pc '/home/autobuild/autobuild/instance-15/output-1/target/usr/lib/pkgconfig' make[2]: Leaving directory '/home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1' make[1]: Leaving directory '/home/autobuild/autobuild/instance-15/output-1/build/tpm2-totp-0.2.1' >>> ustream-ssl 68d09243b6fd4473004b27ff6483352e76e6af1a Downloading GIT_DIR=/home/autobuild/autobuild/instance-15/dl/ustream-ssl/git/.git git init . hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /home/autobuild/autobuild/instance-15/dl/ustream-ssl/git/.git/ GIT_DIR=/home/autobuild/autobuild/instance-15/dl/ustream-ssl/git/.git git remote add origin 'https://git.openwrt.org/project/ustream-ssl.git' GIT_DIR=/home/autobuild/autobuild/instance-15/dl/ustream-ssl/git/.git git remote set-url origin 'https://git.openwrt.org/project/ustream-ssl.git' Fetching all references GIT_DIR=/home/autobuild/autobuild/instance-15/dl/ustream-ssl/git/.git git fetch origin From https://git.openwrt.org/project/ustream-ssl * [new branch] master -> origin/master * [new branch] openwrt-19.07 -> origin/openwrt-19.07 * [new branch] staging/ynezz/next -> origin/staging/ynezz/next GIT_DIR=/home/autobuild/autobuild/instance-15/dl/ustream-ssl/git/.git git fetch origin -t GIT_DIR=/home/autobuild/autobuild/instance-15/dl/ustream-ssl/git/.git git submodule --quiet foreach 'printf "Deregistering submodule \"%s\"\n" "${path}" && cd .. && rm -rf "${path##*/}"' GIT_DIR=/home/autobuild/autobuild/instance-15/dl/ustream-ssl/git/.git git checkout -f -q '68d09243b6fd4473004b27ff6483352e76e6af1a' warning: refname '68d09243b6fd4473004b27ff6483352e76e6af1a' is ambiguous. Git normally never creates a ref that ends with 40 hex characters because it will be ignored when you just specify 40-hex. These refs may be created by mistake. For example, git switch -c $br $(git rev-parse ...) where "$br" is somehow empty and a 40-hex ref is created. Please examine these refs and maybe delete them. Turn this message off by running "git config advice.objectNameWarning false" GIT_DIR=/home/autobuild/autobuild/instance-15/dl/ustream-ssl/git/.git git clean -ffdx ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a-br1.tar.gz: OK (sha256: e77e579b718085c1447339e0fcd5385b85a783d5c92544e48a6b37b1695a7f39) >>> ustream-ssl 68d09243b6fd4473004b27ff6483352e76e6af1a Extracting gzip -d -c /home/autobuild/autobuild/instance-15/dl/ustream-ssl/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a-br1.tar.gz | /home/autobuild/autobuild/instance-15/output-1/host/bin/tar --strip-components=1 -C /home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a -xf - >>> ustream-ssl 68d09243b6fd4473004b27ff6483352e76e6af1a Patching >>> ustream-ssl 68d09243b6fd4473004b27ff6483352e76e6af1a Configuring (mkdir -p /home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a/ && cd /home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a/ && rm -f CMakeCache.txt && PATH="/home/autobuild/autobuild/instance-15/output-1/host/bin:/home/autobuild/autobuild/instance-15/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /home/autobuild/autobuild/instance-15/output-1/host/bin/cmake /home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a/ -G"Unix Makefiles" -DCMAKE_MAKE_PROGRAM="/home/autobuild/make/make" -DCMAKE_TOOLCHAIN_FILE="/home/autobuild/autobuild/instance-15/output-1/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_INSTALL_RUNSTATEDIR="/run" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON ) CMake Deprecation Warning at CMakeLists.txt:1 (cmake_minimum_required): Compatibility with CMake < 3.5 will be removed from a future version of CMake. Update the VERSION argument value or use a ... suffix to tell CMake that the project does not need compatibility with older versions. -- The C compiler identification is GNU 12.3.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Configuring done (0.5s) -- Generating done (0.0s) CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_TEST BUILD_TESTING BUILD_TESTS CMAKE_INSTALL_RUNSTATEDIR -- Build files have been written to: /home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a >>> ustream-ssl 68d09243b6fd4473004b27ff6483352e76e6af1a Building GIT_DIR=. PATH="/home/autobuild/autobuild/instance-15/output-1/host/bin:/home/autobuild/autobuild/instance-15/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /home/autobuild/autobuild/instance-15/output-1/host/bin/cmake --build /home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a/ -j1 -- make[1]: Entering directory '/home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a' [ 12%] Building C object CMakeFiles/ustream-ssl.dir/ustream-ssl.c.o [ 25%] Building C object CMakeFiles/ustream-ssl.dir/ustream-io-openssl.c.o [ 37%] Building C object CMakeFiles/ustream-ssl.dir/ustream-openssl.c.o [ 50%] Linking C shared library libustream-ssl.so [ 50%] Built target ustream-ssl [ 62%] Building C object CMakeFiles/ustream-example-server.dir/ustream-example-server.c.o [ 75%] Linking C executable ustream-example-server [ 75%] Built target ustream-example-server [ 87%] Building C object CMakeFiles/ustream-example-client.dir/ustream-example-client.c.o [100%] Linking C executable ustream-example-client [100%] Built target ustream-example-client make[1]: Leaving directory '/home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a' >>> ustream-ssl 68d09243b6fd4473004b27ff6483352e76e6af1a Installing to staging directory GIT_DIR=. PATH="/home/autobuild/autobuild/instance-15/output-1/host/bin:/home/autobuild/autobuild/instance-15/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" DESTDIR=/home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot /home/autobuild/autobuild/instance-15/output-1/host/bin/cmake --install /home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a/ -- Install configuration: "Release" -- Installing: /home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot/usr/include/libubox/ustream-ssl.h -- Installing: /home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot/usr/lib/libustream-ssl.so >>> ustream-ssl 68d09243b6fd4473004b27ff6483352e76e6af1a Fixing libtool files for la in $(find /home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /usr/bin/sed -i -e "s:/home/autobuild/autobuild/instance-15/output-1:@BASE_DIR@:g" \ -e "s:/home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ \ -e "s:@STAGING_DIR@:/home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot:g" \ -e "s:@BASE_DIR@:/home/autobuild/autobuild/instance-15/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> ustream-ssl 68d09243b6fd4473004b27ff6483352e76e6af1a Installing to target GIT_DIR=. PATH="/home/autobuild/autobuild/instance-15/output-1/host/bin:/home/autobuild/autobuild/instance-15/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" DESTDIR=/home/autobuild/autobuild/instance-15/output-1/target /home/autobuild/autobuild/instance-15/output-1/host/bin/cmake --install /home/autobuild/autobuild/instance-15/output-1/build/ustream-ssl-68d09243b6fd4473004b27ff6483352e76e6af1a/ -- Install configuration: "Release" -- Installing: /home/autobuild/autobuild/instance-15/output-1/target/usr/include/libubox/ustream-ssl.h -- Installing: /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/libustream-ssl.so >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/autobuild/autobuild/instance-15/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_FCFLAGS@%'-O3', '-g0'@PKG_TARGET_FCFLAGS@%g" -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%or1k%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/autobuild/autobuild/instance-15/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-15/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/autobuild/autobuild/instance-15/output-1/host%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-15/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-15/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/autobuild/autobuild/instance-15/output-1/host/bin/or1k-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%or1k%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%'-O3', '-g0'%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@BR2_CMAKE@%/home/autobuild/autobuild/instance-15/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/autobuild/autobuild/instance-15/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/autobuild/autobuild/instance-15/output-1/host%g" -e "s%@STAGING_DIR@%/home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/autobuild/autobuild/instance-15/buildroot/support/misc/cross-compilation.conf.in > /home/autobuild/autobuild/instance-15/output-1/host/etc/meson/cross-compilation.conf /usr/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/autobuild/autobuild/instance-15/output-1/target/etc/inittab /usr/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/autobuild/autobuild/instance-15/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/autobuild/autobuild/instance-15/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/ash$' /home/autobuild/autobuild/instance-15/output-1/target/etc/shells || echo "/bin/ash" >> /home/autobuild/autobuild/instance-15/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/autobuild/autobuild/instance-15/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/hush$' /home/autobuild/autobuild/instance-15/output-1/target/etc/shells || echo "/bin/hush" >> /home/autobuild/autobuild/instance-15/output-1/target/etc/shells; fi mkdir -p /home/autobuild/autobuild/instance-15/output-1/target/etc echo "buildroot" > /home/autobuild/autobuild/instance-15/output-1/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/autobuild/autobuild/instance-15/output-1/target/etc/hosts mkdir -p /home/autobuild/autobuild/instance-15/output-1/target/etc echo "Welcome to Buildroot" > /home/autobuild/autobuild/instance-15/output-1/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root::, /home/autobuild/autobuild/instance-15/output-1/target/etc/shadow grep -qsE '^/bin/sh$' /home/autobuild/autobuild/instance-15/output-1/target/etc/shells || echo "/bin/sh" >> /home/autobuild/autobuild/instance-15/output-1/target/etc/shells if [ -x /home/autobuild/autobuild/instance-15/output-1/target/sbin/swapon -a -x /home/autobuild/autobuild/instance-15/output-1/target/sbin/swapoff ]; then /usr/bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/autobuild/autobuild/instance-15/output-1/target/etc/inittab; else /usr/bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/autobuild/autobuild/instance-15/output-1/target/etc/inittab; fi rm -rf /home/autobuild/autobuild/instance-15/output-1/target/usr/include /home/autobuild/autobuild/instance-15/output-1/target/usr/share/aclocal \ /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/pkgconfig /home/autobuild/autobuild/instance-15/output-1/target/usr/share/pkgconfig \ /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/cmake /home/autobuild/autobuild/instance-15/output-1/target/usr/share/cmake \ /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/rpm /home/autobuild/autobuild/instance-15/output-1/target/usr/doc find /home/autobuild/autobuild/instance-15/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/autobuild/autobuild/instance-15/output-1/target/lib/ /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/ /home/autobuild/autobuild/instance-15/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/autobuild/autobuild/instance-15/output-1/target/usr/libexec/': No such file or directory rm -rf /home/autobuild/autobuild/instance-15/output-1/target/usr/share/gdb rm -rf /home/autobuild/autobuild/instance-15/output-1/target/usr/share/bash-completion rm -rf /home/autobuild/autobuild/instance-15/output-1/target/etc/bash_completion.d rm -rf /home/autobuild/autobuild/instance-15/output-1/target/usr/share/zsh rm -rf /home/autobuild/autobuild/instance-15/output-1/target/usr/man /home/autobuild/autobuild/instance-15/output-1/target/usr/share/man rm -rf /home/autobuild/autobuild/instance-15/output-1/target/usr/info /home/autobuild/autobuild/instance-15/output-1/target/usr/share/info rm -rf /home/autobuild/autobuild/instance-15/output-1/target/usr/doc /home/autobuild/autobuild/instance-15/output-1/target/usr/share/doc rm -rf /home/autobuild/autobuild/instance-15/output-1/target/usr/share/gtk-doc rmdir /home/autobuild/autobuild/instance-15/output-1/target/usr/share 2>/dev/null || true rm -rf /home/autobuild/autobuild/instance-15/output-1/target/lib/debug /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/debug find /home/autobuild/autobuild/instance-15/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /home/autobuild/autobuild/instance-15/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /home/autobuild/autobuild/instance-15/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/autobuild/autobuild/instance-15/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/autobuild/autobuild/instance-15/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2023.11-1042-g3e1b7be3ab"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2024.02-git"; \ echo "PRETTY_NAME=\"Buildroot 2024.02-git\"" \ ) > /home/autobuild/autobuild/instance-15/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/autobuild/autobuild/instance-15/output-1/target/etc >>> Sanitizing RPATH in target tree PARALLEL_JOBS=1 \ PER_PACKAGE_DIR=/home/autobuild/autobuild/instance-15/output-1/per-package \ /home/autobuild/autobuild/instance-15/buildroot/support/scripts/fix-rpath target touch /home/autobuild/autobuild/instance-15/output-1/target/usr ln -snf /home/autobuild/autobuild/instance-15/output-1/host/or1k-buildroot-linux-gnu/sysroot /home/autobuild/autobuild/instance-15/output-1/staging make: Leaving directory '/home/autobuild/autobuild/instance-15/buildroot' make: Entering directory '/home/autobuild/autobuild/instance-15/buildroot' >>> Buildroot 2023.11-1042-g3e1b7be3ab Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-buildroot Collecting legal info >>> gcc-final 12.3.0 Collecting legal info COPYING.RUNTIME: OK (sha256: 9d6b43ce4d8de0c878bf16b54d8e7a10d9bd42b75178153e3af6a815bdc90f74) >>> host-gcc-final 12.3.0 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) COPYING3.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) >>> glibc 2.38-44-gd37c2b20a4787463d192b32041c3406c2bd91de0 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) LICENSES: OK (sha256: b33d0bd9f685b46853548814893a6135e74430d12f6d94ab3eba42fc591f83bc) >>> host-bison 3.8.2 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-skeleton Collecting legal info >>> host-tar 1.34 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-gawk 5.3.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-gcc-initial 12.3.0 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) COPYING3.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) >>> host-binutils 2.40 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-gmp 6.3.0 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-mpc 1.2.1 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.1.1 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> linux-headers 6.6.15 Collecting legal info COPYING: OK (sha256: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0) LICENSES/preferred/GPL-2.0: OK (sha256: f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79) LICENSES/exceptions/Linux-syscall-note: OK (sha256: 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> abootimg 1ebeb393252ab5aeed62e34bc439b6728444f06e Collecting legal info LICENSE: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> util-linux 2.39.2 Collecting legal info README.licensing: OK (sha256: 64dfeae1519bf0e27563d905a71264310fb6a8fa74e5cf99bb36e4d30d7ef455) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-autoconf 2.72 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> zlib Collecting legal info >>> libzlib 1.3.1 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> busybox 1.36.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> initscripts Collecting legal info >>> libev 4.33 Collecting legal info LICENSE: OK (sha256: c4dd1a5bc38b041a320b93c5d6c08f5c41a63f2ce718ee16cfcb757fad448199) >>> liblogging 1.0.6 Collecting legal info COPYING: OK (sha256: a5626f700d3ee92513673b5f43733af5b651d9e7a9157d4bd81ceb9c89ec04b0) >>> libopenssl 3.2.0 Collecting legal info LICENSE.txt: OK (sha256: 7d5450cb2d142651b8afa315b5f238efc805dad827d91ba367d8516bc9d49e7a) >>> libpng 1.6.40 Collecting legal info LICENSE: OK (sha256: 5c0bb4b05b1354ae7c173532b6702ea68b611047ff9b91c4d3af77da39c195d9) >>> libqrencode 4.1.1 Collecting legal info COPYING: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> libubox 75a3b870cace1171faf57bd55e5a9a2f1564f757 Collecting legal info >>> host-cmake 3.28.1 Collecting legal info Copyright.txt: OK (sha256: 4a01ccf2dc580ba570d02bc015bbe0ec92f1f318717aae9540ba841ba7946756) >>> openssl Collecting legal info >>> host-patchelf 0.13 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pngquant 2.18.0 Collecting legal info COPYRIGHT: OK (sha256: e4f467f7abf860b4e620f5f60fdd88bc3a63a0fdb98a481fb002b5e511c9b826) >>> rtty 8.1.0 Collecting legal info LICENSE: OK (sha256: 99efed4bbc0b62f96f999ef23399e38234fb91651af734fd389a52b033a85b55) >>> tpm2-totp 0.2.1 Collecting legal info LICENSE: OK (sha256: 67bc21a0bff2b0890307cfaa883bd3f5337f461eb6d8a612a015cea6d704e9ed) >>> tpm2-tss 3.2.2 Collecting legal info LICENSE: OK (sha256: 18c1bf4b1ba1fb2c4ffa7398c234d83c0d55475298e470ae1e5e3a8a8bd2e448) >>> ustream-ssl 68d09243b6fd4473004b27ff6483352e76e6af1a Collecting legal info ustream-ssl.h: OK (sha256: cf28f0f01a57423983fa062eb0f04bb1a78891863cb58c53059c3d8cb52c1dd4) WARNING: the Buildroot source code has not been saved WARNING: libubox-75a3b870cace1171faf57bd55e5a9a2f1564f757: cannot save license (LIBUBOX_LICENSE_FILES not defined) Legal info produced in /home/autobuild/autobuild/instance-15/output-1/legal-info make: Leaving directory '/home/autobuild/autobuild/instance-15/buildroot'