checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for sh... /usr/bin/sh checking for library containing AES_encrypt... -lcrypto checking for openssl/aes.h... yes checking for sysinfo... yes checking for posix_memalign... yes checking for mmap... yes checking for struct sysinfo... yes checking for struct sysinfo.totalram... yes checking for struct sysinfo.mem_unit... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for C compiler vendor... gnu checking compiler_warnings... yes checking CFLAGS for most reasonable warnings... -Wall configure: checking POSIX compatibility... WARNING: POSIX violation: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc does not understand -lxnet ./libcperciva/POSIX/posix-cflags.sh: line 25: ./a.out: cannot execute: required file not found WARNING: failed to run a trivial binary; disabling runtime POSIX compatibility checks ... done checking POSIX compatibility checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls >>> scrypt 1.3.2 Building GIT_DIR=. PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' ( export CC="/home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc"; export CFLAGS="-Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 "; command -p sh ./libcperciva/cpusupport/Build/cpusupport.sh "$PATH") > cpusupport-config.h.tmp && command -p mv cpusupport-config.h.tmp cpusupport-config.h Checking if compiler supports HWCAP ELF_AUX_INFO feature... no Checking if compiler supports HWCAP GETAUXVAL feature... yes Checking if compiler supports X86 CPUID feature... yes Checking if compiler supports X86 CPUID_COUNT feature... yes Checking if compiler supports X86 AESNI feature... yes Checking if compiler supports X86 RDRAND feature... yes Checking if compiler supports X86 SHANI feature... yes Checking if compiler supports X86 SSE2 feature... yes Checking if compiler supports X86 SSSE3 feature... yes Checking if compiler supports ARM AES feature... no Checking if compiler supports ARM SHA256 feature... no /usr/bin/make all-am make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o main.o main.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/util/asprintf.o libcperciva/util/asprintf.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/util/entropy.o libcperciva/util/entropy.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/util/getopt.o libcperciva/util/getopt.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/util/humansize.o libcperciva/util/humansize.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/util/monoclock.o libcperciva/util/monoclock.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/util/readpass.o libcperciva/util/readpass.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/util/readpass_file.o libcperciva/util/readpass_file.c /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_AESNI}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/crypto/aesni_la-crypto_aes_aesni.lo `test -f 'libcperciva/crypto/crypto_aes_aesni.c' || echo './'`libcperciva/crypto/crypto_aes_aesni.c /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_AESNI}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/crypto/aesni_la-crypto_aesctr_aesni.lo `test -f 'libcperciva/crypto/crypto_aesctr_aesni.c' || echo './'`libcperciva/crypto/crypto_aesctr_aesni.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_aes_aesni.c -fPIC -DPIC -o libcperciva/crypto/.libs/aesni_la-crypto_aes_aesni.o /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_RDRAND}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/crypto/rdrand_la-crypto_entropy_rdrand.lo `test -f 'libcperciva/crypto/crypto_entropy_rdrand.c' || echo './'`libcperciva/crypto/crypto_entropy_rdrand.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_aesctr_aesni.c -fPIC -DPIC -o libcperciva/crypto/.libs/aesni_la-crypto_aesctr_aesni.o /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_SHANI} ${CFLAGS_X86_SSSE3}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/alg/shani_la-sha256_shani.lo `test -f 'libcperciva/alg/sha256_shani.c' || echo './'`libcperciva/alg/sha256_shani.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_entropy_rdrand.c -fPIC -DPIC -o libcperciva/crypto/.libs/rdrand_la-crypto_entropy_rdrand.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/alg/sha256_shani.c -fPIC -DPIC -o libcperciva/alg/.libs/shani_la-sha256_shani.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_aes_aesni.c -o libcperciva/crypto/aesni_la-crypto_aes_aesni.o >/dev/null 2>&1 /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_SSE2}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/alg/libscrypt_sse2_la-sha256_sse2.lo `test -f 'libcperciva/alg/sha256_sse2.c' || echo './'`libcperciva/alg/sha256_sse2.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_aesctr_aesni.c -o libcperciva/crypto/aesni_la-crypto_aesctr_aesni.o >/dev/null 2>&1 libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/alg/sha256_sse2.c -fPIC -DPIC -o libcperciva/alg/.libs/libscrypt_sse2_la-sha256_sse2.o /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_SSE2}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o lib/crypto/libscrypt_sse2_la-crypto_scrypt_smix_sse2.lo `test -f 'lib/crypto/crypto_scrypt_smix_sse2.c' || echo './'`lib/crypto/crypto_scrypt_smix_sse2.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c lib/crypto/crypto_scrypt_smix_sse2.c -fPIC -DPIC -o lib/crypto/.libs/libscrypt_sse2_la-crypto_scrypt_smix_sse2.o lib/crypto/crypto_scrypt_smix_sse2.c: In function 'crypto_scrypt_smix_sse2': libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/alg/sha256_sse2.c -o libcperciva/alg/libscrypt_sse2_la-sha256_sse2.o >/dev/null 2>&1 lib/crypto/crypto_scrypt_smix_sse2.c:212:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 212 | blkcpy((void *)((uintptr_t)(V) + i * 128 * r), X, 128 * r); | ^ lib/crypto/crypto_scrypt_smix_sse2.c:218:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 218 | blkcpy((void *)((uintptr_t)(V) + (i + 1) * 128 * r), | ^ lib/crypto/crypto_scrypt_smix_sse2.c:231:27: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 231 | blkxor(X, (void *)((uintptr_t)(V) + j * 128 * r), 128 * r); | ^ lib/crypto/crypto_scrypt_smix_sse2.c:238:27: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 238 | blkxor(Y, (void *)((uintptr_t)(V) + j * 128 * r), 128 * r); | ^ libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_entropy_rdrand.c -o libcperciva/crypto/rdrand_la-crypto_entropy_rdrand.o >/dev/null 2>&1 libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/alg/sha256_shani.c -o libcperciva/alg/shani_la-sha256_shani.o >/dev/null 2>&1 /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_ARM_SHA256}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/alg/arm_sha256_la-sha256_arm.lo `test -f 'libcperciva/alg/sha256_arm.c' || echo './'`libcperciva/alg/sha256_arm.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/alg/sha256_arm.c -fPIC -DPIC -o libcperciva/alg/.libs/arm_sha256_la-sha256_arm.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/alg/sha256_arm.c -o libcperciva/alg/arm_sha256_la-sha256_arm.o >/dev/null 2>&1 /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_ARM_AES}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/crypto/arm_aes_la-crypto_aes_arm.lo `test -f 'libcperciva/crypto/crypto_aes_arm.c' || echo './'`libcperciva/crypto/crypto_aes_arm.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_aes_arm.c -fPIC -DPIC -o libcperciva/crypto/.libs/arm_aes_la-crypto_aes_arm.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_aes_arm.c -o libcperciva/crypto/arm_aes_la-crypto_aes_arm.o >/dev/null 2>&1 /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_ARM_AES}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/crypto/arm_aes_la-crypto_aesctr_arm.lo `test -f 'libcperciva/crypto/crypto_aesctr_arm.c' || echo './'`libcperciva/crypto/crypto_aesctr_arm.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_aesctr_arm.c -fPIC -DPIC -o libcperciva/crypto/.libs/arm_aes_la-crypto_aesctr_arm.o libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c libcperciva/crypto/crypto_aesctr_arm.c -o libcperciva/crypto/arm_aes_la-crypto_aesctr_arm.o >/dev/null 2>&1 /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o lib/crypto/crypto_scrypt_smix.o lib/crypto/crypto_scrypt_smix.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o lib-platform/crypto/crypto_scrypt.o lib-platform/crypto/crypto_scrypt.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/alg/sha256.o libcperciva/alg/sha256.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/cpusupport/cpusupport_arm_aes.o libcperciva/cpusupport/cpusupport_arm_aes.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/cpusupport/cpusupport_arm_sha256.o libcperciva/cpusupport/cpusupport_arm_sha256.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_aesni.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_rdrand.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_shani.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_sse2.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/cpusupport/cpusupport_x86_ssse3.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/util/insecure_memzero.o libcperciva/util/insecure_memzero.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c lib/crypto/crypto_scrypt_smix_sse2.c -o lib/crypto/libscrypt_sse2_la-crypto_scrypt_smix_sse2.o >/dev/null 2>&1 /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/util/warnp.o libcperciva/util/warnp.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o lib/scryptenc/scryptenc.o lib/scryptenc/scryptenc.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o lib/scryptenc/scryptenc_cpuperf.o lib/scryptenc/scryptenc_cpuperf.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o lib/scryptenc/scryptenc_print_error.o lib/scryptenc/scryptenc_print_error.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o lib/util/passphrase_entry.o lib/util/passphrase_entry.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/crypto/crypto_aes.o libcperciva/crypto/crypto_aes.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/crypto/crypto_aesctr.o libcperciva/crypto/crypto_aesctr.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/crypto/crypto_entropy.o libcperciva/crypto/crypto_entropy.c /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o libcperciva/crypto/crypto_verify_bytes.o libcperciva/crypto/crypto_verify_bytes.c /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_AESNI}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o libcperciva_aesni.la libcperciva/crypto/aesni_la-crypto_aes_aesni.lo libcperciva/crypto/aesni_la-crypto_aesctr_aesni.lo -lcrypto /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_RDRAND}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o libcperciva_rdrand.la libcperciva/crypto/rdrand_la-crypto_entropy_rdrand.lo -lcrypto /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_SHANI} ${CFLAGS_X86_SSSE3}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o libcperciva_shani.la libcperciva/alg/shani_la-sha256_shani.lo -lcrypto libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ar cr .libs/libcperciva_aesni.a libcperciva/crypto/.libs/aesni_la-crypto_aes_aesni.o libcperciva/crypto/.libs/aesni_la-crypto_aesctr_aesni.o libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ar cr .libs/libcperciva_rdrand.a libcperciva/crypto/.libs/rdrand_la-crypto_entropy_rdrand.o libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ranlib .libs/libcperciva_aesni.a libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ranlib .libs/libcperciva_rdrand.a libtool: link: ( cd ".libs" && rm -f "libcperciva_aesni.la" && ln -s "../libcperciva_aesni.la" "libcperciva_aesni.la" ) libtool: link: ( cd ".libs" && rm -f "libcperciva_rdrand.la" && ln -s "../libcperciva_rdrand.la" "libcperciva_rdrand.la" ) /bin/sh ./libtool --tag=CC --mode=compile /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -U_POSIX_C_SOURCE -U_XOPEN_SOURCE -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o lib-platform/util/libscrypt_memlimit_la-memlimit.lo `test -f 'lib-platform/util/memlimit.c' || echo './'`lib-platform/util/memlimit.c /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_ARM_SHA256}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o libcperciva_arm_sha256.la libcperciva/alg/arm_sha256_la-sha256_arm.lo -lcrypto libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ar cr .libs/libcperciva_shani.a libcperciva/alg/.libs/shani_la-sha256_shani.o libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ranlib .libs/libcperciva_shani.a libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -U_POSIX_C_SOURCE -U_XOPEN_SOURCE -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c lib-platform/util/memlimit.c -fPIC -DPIC -o lib-platform/util/.libs/libscrypt_memlimit_la-memlimit.o libtool: link: ( cd ".libs" && rm -f "libcperciva_shani.la" && ln -s "../libcperciva_shani.la" "libcperciva_shani.la" ) /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_ARM_AES}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o libcperciva_arm_aes.la libcperciva/crypto/arm_aes_la-crypto_aes_arm.lo libcperciva/crypto/arm_aes_la-crypto_aesctr_arm.lo -lcrypto libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ar cr .libs/libcperciva_arm_sha256.a libcperciva/alg/.libs/arm_sha256_la-sha256_arm.o libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ranlib .libs/libcperciva_arm_sha256.a libtool: link: ( cd ".libs" && rm -f "libcperciva_arm_sha256.la" && ln -s "../libcperciva_arm_sha256.la" "libcperciva_arm_sha256.la" ) /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o tests/verify-strings/test_scrypt.o tests/verify-strings/test_scrypt.c libtool: compile: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -U_POSIX_C_SOURCE -U_XOPEN_SOURCE -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c lib-platform/util/memlimit.c -o lib-platform/util/libscrypt_memlimit_la-memlimit.o >/dev/null 2>&1 libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ar cr .libs/libcperciva_arm_aes.a libcperciva/crypto/.libs/arm_aes_la-crypto_aes_arm.o libcperciva/crypto/.libs/arm_aes_la-crypto_aesctr_arm.o libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ranlib .libs/libcperciva_arm_aes.a /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./lib-platform -I./lib-platform/crypto -I./lib-platform/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -c -o tests/valgrind/potential-memleaks.o tests/valgrind/potential-memleaks.c libtool: link: ( cd ".libs" && rm -f "libcperciva_arm_aes.la" && ln -s "../libcperciva_arm_aes.la" "libcperciva_arm_aes.la" ) /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -U_POSIX_C_SOURCE -U_XOPEN_SOURCE -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o libscrypt_memlimit.la lib-platform/util/libscrypt_memlimit_la-memlimit.lo -lcrypto /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o tests/valgrind/potential-memleaks tests/valgrind/potential-memleaks.o -lcrypto libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ar cr .libs/libscrypt_memlimit.a lib-platform/util/.libs/libscrypt_memlimit_la-memlimit.o libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ranlib .libs/libscrypt_memlimit.a libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o tests/valgrind/potential-memleaks tests/valgrind/potential-memleaks.o -lcrypto libtool: link: ( cd ".libs" && rm -f "libscrypt_memlimit.la" && ln -s "../libscrypt_memlimit.la" "libscrypt_memlimit.la" ) /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_SSE2}` -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o libscrypt_sse2.la libcperciva/alg/libscrypt_sse2_la-sha256_sse2.lo lib/crypto/libscrypt_sse2_la-crypto_scrypt_smix_sse2.lo -lcrypto libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ar cr .libs/libscrypt_sse2.a libcperciva/alg/.libs/libscrypt_sse2_la-sha256_sse2.o lib/crypto/.libs/libscrypt_sse2_la-crypto_scrypt_smix_sse2.o libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ranlib .libs/libscrypt_sse2.a libtool: link: ( cd ".libs" && rm -f "libscrypt_sse2.la" && ln -s "../libscrypt_sse2.la" "libscrypt_sse2.la" ) /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o scrypt main.o lib/crypto/crypto_scrypt_smix.o lib-platform/crypto/crypto_scrypt.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_arm_aes.o libcperciva/cpusupport/cpusupport_arm_sha256.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o lib/scryptenc/scryptenc.o lib/scryptenc/scryptenc_cpuperf.o lib/scryptenc/scryptenc_print_error.o lib/util/passphrase_entry.o libcperciva/crypto/crypto_aes.o libcperciva/crypto/crypto_aesctr.o libcperciva/crypto/crypto_entropy.o libcperciva/crypto/crypto_verify_bytes.o libcperciva/util/asprintf.o libcperciva/util/entropy.o libcperciva/util/getopt.o libcperciva/util/humansize.o libcperciva/util/monoclock.o libcperciva/util/readpass.o libcperciva/util/readpass_file.o libcperciva_aesni.la libcperciva_rdrand.la libcperciva_shani.la libscrypt_sse2.la libscrypt_memlimit.la libcperciva_arm_sha256.la libcperciva_arm_aes.la -lrt -lcrypto /bin/sh ./libtool --tag=CC --mode=link /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o tests/verify-strings/test_scrypt tests/verify-strings/test_scrypt.o lib/crypto/crypto_scrypt_smix.o lib-platform/crypto/crypto_scrypt.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_arm_aes.o libcperciva/cpusupport/cpusupport_arm_sha256.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o libcperciva_shani.la libscrypt_sse2.la libcperciva_arm_sha256.la -lrt -lcrypto libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o tests/verify-strings/test_scrypt tests/verify-strings/test_scrypt.o lib/crypto/crypto_scrypt_smix.o lib-platform/crypto/crypto_scrypt.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_arm_aes.o libcperciva/cpusupport/cpusupport_arm_sha256.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o ./.libs/libcperciva_shani.a ./.libs/libscrypt_sse2.a ./.libs/libcperciva_arm_sha256.a -lrt -lcrypto libtool: link: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -o scrypt main.o lib/crypto/crypto_scrypt_smix.o lib-platform/crypto/crypto_scrypt.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_arm_aes.o libcperciva/cpusupport/cpusupport_arm_sha256.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o lib/scryptenc/scryptenc.o lib/scryptenc/scryptenc_cpuperf.o lib/scryptenc/scryptenc_print_error.o lib/util/passphrase_entry.o libcperciva/crypto/crypto_aes.o libcperciva/crypto/crypto_aesctr.o libcperciva/crypto/crypto_entropy.o libcperciva/crypto/crypto_verify_bytes.o libcperciva/util/asprintf.o libcperciva/util/entropy.o libcperciva/util/getopt.o libcperciva/util/humansize.o libcperciva/util/monoclock.o libcperciva/util/readpass.o libcperciva/util/readpass_file.o ./.libs/libcperciva_aesni.a ./.libs/libcperciva_rdrand.a ./.libs/libcperciva_shani.a ./.libs/libscrypt_sse2.a ./.libs/libscrypt_memlimit.a ./.libs/libcperciva_arm_sha256.a ./.libs/libcperciva_arm_aes.a -lrt -lcrypto make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' >>> scrypt 1.3.2 Installing to staging directory GIT_DIR=. PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot install -C /home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' /usr/bin/make install-am make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/bin' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/share/man/man1' /bin/sh ./libtool --mode=install /usr/bin/install -c scrypt '/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/bin' /usr/bin/install -c -m 644 scrypt.1 '/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/share/man/man1' libtool: install: /usr/bin/install -c scrypt /home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/bin/scrypt make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' >>> scrypt 1.3.2 Fixing libtool files for la in $(find /home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /usr/bin/sed -i -e "s:/home/buildroot/autobuild/instance-1/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/instance-1/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> scrypt 1.3.2 Installing to target GIT_DIR=. PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/instance-1/output-1/target install -C /home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2/ make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' /usr/bin/make install-am make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' /usr/bin/mkdir -p '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /bin/sh ./libtool --mode=install /usr/bin/install -c scrypt '/home/buildroot/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/install -c -m 644 scrypt.1 '/home/buildroot/autobuild/instance-1/output-1/target/usr/share/man/man1' libtool: install: /usr/bin/install -c scrypt /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/scrypt make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/scrypt-1.3.2' >>> uhttpd 15346de8d3ba422002496526ee24c62a3601ab8c Downloading GIT_DIR=/home/buildroot/autobuild/instance-1/dl/uhttpd/git/.git git init . hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /home/buildroot/autobuild/instance-1/dl/uhttpd/git/.git/ GIT_DIR=/home/buildroot/autobuild/instance-1/dl/uhttpd/git/.git git remote add origin 'https://git.openwrt.org/project/uhttpd.git' GIT_DIR=/home/buildroot/autobuild/instance-1/dl/uhttpd/git/.git git remote set-url origin 'https://git.openwrt.org/project/uhttpd.git' Fetching all references GIT_DIR=/home/buildroot/autobuild/instance-1/dl/uhttpd/git/.git git fetch origin From https://git.openwrt.org/project/uhttpd * [new branch] master -> origin/master * [new branch] openwrt-19.07 -> origin/openwrt-19.07 GIT_DIR=/home/buildroot/autobuild/instance-1/dl/uhttpd/git/.git git fetch origin -t GIT_DIR=/home/buildroot/autobuild/instance-1/dl/uhttpd/git/.git git submodule --quiet foreach 'printf "Deregistering submodule \"%s\"\n" "${path}" && cd .. && rm -rf "${path##*/}"' GIT_DIR=/home/buildroot/autobuild/instance-1/dl/uhttpd/git/.git git checkout -f -q '15346de8d3ba422002496526ee24c62a3601ab8c' warning: refname '15346de8d3ba422002496526ee24c62a3601ab8c' is ambiguous. Git normally never creates a ref that ends with 40 hex characters because it will be ignored when you just specify 40-hex. These refs may be created by mistake. For example, git switch -c $br $(git rev-parse ...) where "$br" is somehow empty and a 40-hex ref is created. Please examine these refs and maybe delete them. Turn this message off by running "git config advice.objectNameWarning false" GIT_DIR=/home/buildroot/autobuild/instance-1/dl/uhttpd/git/.git git clean -ffdx uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c-br1.tar.gz: OK (sha256: 9ae10aaf6642b214e0a4ca47d6fd9693ac4b88d61e7d6446f0f0feb3a28ca510) >>> uhttpd 15346de8d3ba422002496526ee24c62a3601ab8c Extracting gzip -d -c /home/buildroot/autobuild/instance-1/dl/uhttpd/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c-br1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c -xf - >>> uhttpd 15346de8d3ba422002496526ee24c62a3601ab8c Patching Applying 0001-Remove-Werror.patch using patch: patching file CMakeLists.txt Applying 0002-Fix-TCP_FASTOPEN-related-compile-error.patch using patch: patching file listen.c >>> uhttpd 15346de8d3ba422002496526ee24c62a3601ab8c Configuring (mkdir -p /home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c/ && cd /home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c/ && rm -f CMakeCache.txt && PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" /home/buildroot/autobuild/instance-1/output-1/host/bin/cmake /home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c/ -G"Unix Makefiles" -DCMAKE_MAKE_PROGRAM="/usr/bin/make" -DCMAKE_TOOLCHAIN_FILE="/home/buildroot/autobuild/instance-1/output-1/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_INSTALL_RUNSTATEDIR="/run" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON -DLUA_SUPPORT=OFF -DTLS_SUPPORT=OFF -DUBUS_SUPPORT=OFF ) CMake Deprecation Warning at CMakeLists.txt:1 (cmake_minimum_required): Compatibility with CMake < 3.5 will be removed from a future version of CMake. Update the VERSION argument value or use a ... suffix to tell CMake that the project does not need compatibility with older versions. -- The C compiler identification is GNU 13.2.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Looking for getspnam -- Looking for getspnam - found -- Configuring done (0.5s) -- Generating done (0.0s) CMake Warning: Manually-specified variables were not used by the project: BUILD_DOC BUILD_DOCS BUILD_EXAMPLE BUILD_EXAMPLES BUILD_SHARED_LIBS BUILD_TEST BUILD_TESTING BUILD_TESTS CMAKE_INSTALL_RUNSTATEDIR -- Build files have been written to: /home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c >>> uhttpd 15346de8d3ba422002496526ee24c62a3601ab8c Building GIT_DIR=. PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" /home/buildroot/autobuild/instance-1/output-1/host/bin/cmake --build /home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c/ -j4 -- make[1]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c' make[2]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c' make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c' make[3]: Entering directory '/home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c' [ 8%] Building C object CMakeFiles/uhttpd.dir/main.c.o [ 16%] Building C object CMakeFiles/uhttpd.dir/utils.c.o [ 33%] Building C object CMakeFiles/uhttpd.dir/client.c.o [ 33%] Building C object CMakeFiles/uhttpd.dir/listen.c.o [ 41%] Building C object CMakeFiles/uhttpd.dir/file.c.o [ 50%] Building C object CMakeFiles/uhttpd.dir/auth.c.o [ 58%] Building C object CMakeFiles/uhttpd.dir/cgi.c.o [ 66%] Building C object CMakeFiles/uhttpd.dir/relay.c.o [ 75%] Building C object CMakeFiles/uhttpd.dir/proc.c.o [ 83%] Building C object CMakeFiles/uhttpd.dir/plugin.c.o [ 91%] Building C object CMakeFiles/uhttpd.dir/handler.c.o [100%] Linking C executable uhttpd make[3]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c' [100%] Built target uhttpd make[2]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c' make[1]: Leaving directory '/home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c' >>> uhttpd 15346de8d3ba422002496526ee24c62a3601ab8c Installing to target GIT_DIR=. PATH="/home/buildroot/autobuild/instance-1/output-1/host/bin:/home/buildroot/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" DESTDIR=/home/buildroot/autobuild/instance-1/output-1/target /home/buildroot/autobuild/instance-1/output-1/host/bin/cmake --install /home/buildroot/autobuild/instance-1/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c/ -- Install configuration: "Release" -- Installing: /home/buildroot/autobuild/instance-1/output-1/target/usr/bin/uhttpd >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/instance-1/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Ofast', '-g0'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Ofast', '-g0'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_FCFLAGS@%'-Ofast', '-g0'@PKG_TARGET_FCFLAGS@%g" -e "s%@TARGET_CC@%/home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ar%g" -e "s%@TARGET_FC@%/home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gfortran%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%x86%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/instance-1/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/instance-1/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/instance-1/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/instance-1/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gcc-ar%g" -e "s%@TARGET_FC@%/home/buildroot/autobuild/instance-1/output-1/host/bin/i686-linux-gfortran%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%x86%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%little%g" -e "s%@TARGET_FCFLAGS@%'-Ofast', '-g0'%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Ofast', '-g0'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Ofast', '-g0'%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/instance-1/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/instance-1/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/instance-1/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/instance-1/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf if grep -q CONFIG_ASH=y /home/buildroot/autobuild/instance-1/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/instance-1/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/autobuild/instance-1/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/instance-1/output-1/target/etc/shells; fi mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/instance-1/output-1/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-1/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-1/output-1/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root:"*":, /home/buildroot/autobuild/instance-1/output-1/target/etc/shadow grep -qsE '^/bin/sh$' /home/buildroot/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/sh" >> /home/buildroot/autobuild/instance-1/output-1/target/etc/shells rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/include /home/buildroot/autobuild/instance-1/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-1/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-1/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/rpm /home/buildroot/autobuild/instance-1/output-1/target/usr/doc find /home/buildroot/autobuild/instance-1/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/instance-1/output-1/target/lib/ /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-1/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/buildroot/autobuild/instance-1/output-1/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/instance-1/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/man /home/buildroot/autobuild/instance-1/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/info /home/buildroot/autobuild/instance-1/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/doc /home/buildroot/autobuild/instance-1/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/instance-1/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/instance-1/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/instance-1/output-1/target/lib/debug /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/debug find /home/buildroot/autobuild/instance-1/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /home/buildroot/autobuild/instance-1/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /home/buildroot/autobuild/instance-1/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/instance-1/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/instance-1/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2024.02.6-11-g29405a9499"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2024.02.6"; \ echo "PRETTY_NAME=\"Buildroot 2024.02.6\"" \ ) > /home/buildroot/autobuild/instance-1/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-1/output-1/target/etc >>> Sanitizing RPATH in target tree PARALLEL_JOBS=4 \ PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-1/output-1/per-package \ /home/buildroot/autobuild/instance-1/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/instance-1/output-1/target/usr ln -snf /home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot /home/buildroot/autobuild/instance-1/output-1/staging make: Leaving directory '/home/buildroot/autobuild/instance-1/buildroot' make: Entering directory '/home/buildroot/autobuild/instance-1/buildroot' >>> Buildroot 2024.02.6-11-g29405a9499 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-bootlin 2023.11-1 Collecting legal info >>> toolchain Collecting legal info >>> aubio 0.4.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> host-python3 3.11.9 Collecting legal info LICENSE: OK (sha256: 3b2f81fe21d181c499c59a256c8e1968455d6689d269aa85373bfb6af41da3bf) >>> host-autoconf 2.72 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-autoconf-archive 2023.02.20 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-expat 2.6.2 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> host-libffi 3.4.4 Collecting legal info LICENSE: OK (sha256: 2c9c2acb9743e6b007b91350475308aee44691d96aa20eacef8e199988c8c388) >>> host-zlib Collecting legal info >>> host-libzlib 1.3.1 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> host-waf 2.0.26 Collecting legal info waf: OK (sha256: dcec3e179f9c33a66544f1b3d7d91f20f6373530510fa6a858cddb6bfdcde14b) >>> b43-firmware 5.100.138 Collecting legal info >>> host-b43-fwcutter 019 Collecting legal info COPYING: OK (sha256: 6af9fc424d57f29b7e59b35e52d4a91aca80304506275f2c0c076317fc6eb583) >>> busybox 1.36.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> util-linux 2.39.3 Collecting legal info README.licensing: OK (sha256: 13f0ea46d12d798c095a6ad39d7ddc988e2e4d274c6494115f6b463f7bc4f702) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> ncurses 6.4-20230603 Collecting legal info COPYING: OK (sha256: 0413b2f4ea863194c174673032f0fca84f1ea1ed4eed6476baea68c075a631ce) >>> host-ncurses 6.4-20230603 Collecting legal info COPYING: OK (sha256: 0413b2f4ea863194c174673032f0fca84f1ea1ed4eed6476baea68c075a631ce) >>> pcre2 10.42 Collecting legal info LICENCE: OK (sha256: 87d884eceb7fc54611470ce9f74280d28612b0c877adfc767e9676892a638987) >>> zlib Collecting legal info >>> libzlib 1.3.1 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> expat 2.6.2 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> fontconfig 2.14.2 Collecting legal info COPYING: OK (sha256: 51a51aa9823704fd90bccc616cdd17ebabb5b2b3e9cbde886ca02c7002288067) >>> freetype 2.13.2 Collecting legal info LICENSE.TXT: OK (sha256: 2e3bbb7d7c5c396368dd0853a790ec29ce5b8647163dde42a0493fb0d6556b2b) docs/FTL.TXT: OK (sha256: 08c135755dd589039470f1fdbb400daaabaaa50d0b366d19cebff4d22986baa1) docs/GPLv2.TXT: OK (sha256: c4120c6752c910c299e3bd9cb3a46ff262c268303ca2069b61f92f10a5656c18) >>> libpng 1.6.43 Collecting legal info LICENSE: OK (sha256: 7317e078e2d3b5d7ba5a6159e650945153262b44b76f6700f8e9edb261c5143e) >>> host-gperf 3.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> ghostscript-fonts 8.11 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> ghostscript 10.03.1 Collecting legal info LICENSE: OK (sha256: 8ce064f423b7c24a011b6ebf9431b8bf9861a5255e47c84bfb23fc526d030a8b) >>> host-lcms2 2.16 Collecting legal info LICENSE: OK (sha256: 6dbd60437f8ef91d8de1f08ad75882547fd4931bfcc3566a0735f28db1484d31) >>> host-libjpeg 9f Collecting legal info README: OK (sha256: 7c25493a9f64fed34d01445467341bda77bc1cdbeccbe33558659ef173fb9ff2) >>> jpeg Collecting legal info >>> libjpeg 9f Collecting legal info README: OK (sha256: 7c25493a9f64fed34d01445467341bda77bc1cdbeccbe33558659ef173fb9ff2) >>> lcms2 2.16 Collecting legal info LICENSE: OK (sha256: 6dbd60437f8ef91d8de1f08ad75882547fd4931bfcc3566a0735f28db1484d31) >>> tiff 4.6.0 Collecting legal info LICENSE.md: OK (sha256: 0780558a8bfba0af1160ec1ff11ade4f41c0d7deafd6ecfc796b492a788e380d) >>> i7z 5023138d7c35c4667c938b853e5ea89737334e92 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> json-c 0.17 Collecting legal info COPYING: OK (sha256: 74c1e6ca5eba76b54d0ad00d4815c8315c1b3bc45ff99de61d103dc92486284c) >>> host-cmake 3.28.3 Collecting legal info Copyright.txt: OK (sha256: 4a01ccf2dc580ba570d02bc015bbe0ec92f1f318717aae9540ba841ba7946756) >>> json-for-modern-cpp 3.11.3 Collecting legal info LICENSE.MIT: OK (sha256: 86b998c792894ccb911a1cb7994f7a9652894e7a094c0b5e45be2f553f45cf14) >>> kvazaar 2.2.0 Collecting legal info LICENSE: OK (sha256: 3c1dc3d7f8a3d08c14f4fbe9942f45764d8a21a3296e8d83446f33fd65f21c38) LICENSE.EXT.greatest: OK (sha256: 16f569c87d5ec20b7474b55ee0a8877b8f8b4dc13f9567ebe0b8fe8afdeb34d2) LICENSE.EXT.x264asm: OK (sha256: f84c0f33873a015f399d8171cf321af2f09ef915ae7ad5a9edaa7d0286cf9d5e) >>> libfastjson 0.99.9.1 Collecting legal info COPYING: OK (sha256: b29370bbfa98816e1fca0901f18149d920736771bfd68b4ee0eb00c78b38d245) >>> libressl 3.8.4 Collecting legal info COPYING: OK (sha256: 5c63613f008f16a9c0025c096bbd736cecf720494d121b5c5203e0ec6e5955b1) >>> libubox 75a3b870cace1171faf57bd55e5a9a2f1564f757 Collecting legal info >>> libunistring 1.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) >>> mmc-utils e1281d4de9166b7254ba30bb58f9191fc2c9e7fb Collecting legal info README: OK (sha256: 4207d81122a02555f78c5a11b61c83a331ee03dc933e1ef9dd932ef9b434d12d) >>> olsr 0.9.8 Collecting legal info license.txt: OK (sha256: 7dcf1fb93ef105e2708b02603bb6ee443115d4819fbf2c5a3a001b46887acb9a) >>> host-bison 3.8.2 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> openssl Collecting legal info >>> host-patchelf 0.13 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> poco 1.13.2 Collecting legal info LICENSE: OK (sha256: c4b1e1e5f36d8331737231fefcc30f5714326aec7c387ad59a8115eb0ba7d6b5) >>> scrypt 1.3.2 Collecting legal info COPYRIGHT: OK (sha256: 277ba0da6001b6c53c1da3f0d0d9107cf847eed49280e2cf4ca1421b8f707119) >>> uhttpd 15346de8d3ba422002496526ee24c62a3601ab8c Collecting legal info uhttpd.h: OK (sha256: ce1803f83f776cc88661e303fede0e5ff52faf1d9f74508fadbecf7705b4c84d) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-bootlin-2023.11-1: cannot save license (TOOLCHAIN_EXTERNAL_BOOTLIN_LICENSE_FILES not defined) WARNING: b43-firmware-5.100.138: cannot save license (B43_FIRMWARE_LICENSE_FILES not defined) WARNING: libubox-75a3b870cace1171faf57bd55e5a9a2f1564f757: cannot save license (LIBUBOX_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/instance-1/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/instance-1/buildroot'