>>> frr 8.5.4 Extracting gzip -d -c /home/buildroot/autobuild/instance-0/dl/frr/frr-8.5.4.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4 -xf - >>> frr 8.5.4 Patching >>> frr 8.5.4 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4 -name $file); do cp support/gnuconfig/$file $i; done; done >>> frr 8.5.4 Configuring >>> frr 8.5.4 Autoreconfiguring libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'm4/ac'. libtoolize: copying file 'm4/ac/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:176: installing 'm4/ac/compile' configure.ac:26: installing 'm4/ac/config.guess' configure.ac:26: installing 'm4/ac/config.sub' configure.ac:108: installing 'm4/ac/install-sh' configure.ac:108: installing 'm4/ac/missing' Makefile.am: installing 'm4/ac/depcomp' configure.ac: installing 'm4/ac/ylwrap' parallel-tests: installing 'm4/ac/test-driver' >>> frr 8.5.4 Patching libtool patching file /home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/m4/ac/ltmain.sh Hunk #1 succeeded at 2694 (offset 7 lines). Hunk #2 succeeded at 4284 (offset 7 lines). Hunk #3 succeeded at 6579 (offset 25 lines). Hunk #4 succeeded at 6589 (offset 25 lines). Hunk #5 succeeded at 6882 (offset 25 lines). Hunk #6 succeeded at 7174 (offset 25 lines). Hunk #7 succeeded at 8140 (offset 28 lines). Hunk #8 succeeded at 10769 (offset 59 lines). (cd /home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/ && rm -rf config.cache && GIT_DIR=. PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" AR="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-ar" AS="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-as" LD="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-ld" NM="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-nm" CC="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc" GCC="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc" CPP="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-cpp" CXX="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-g++" FC="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gfortran" F77="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gfortran" RANLIB="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-ranlib" READELF="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/instance-0/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/instance-0/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-0/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 " LDFLAGS="" FCFLAGS=" -Ofast -g0" FFLAGS=" -Ofast -g0" PKG_CONFIG="/home/buildroot/autobuild/instance-0/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/instance-0/output-1/host/arceb-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes ac_cv_lib_cunit_CU_initialize_registry=no CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -DFRR_XREF_NO_NOTE" LIBS=-latomic CONFIG_SITE=/dev/null ./configure --target=arceb-buildroot-linux-uclibc --host=arceb-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --with-clippy=/home/buildroot/autobuild/instance-0/output-1/host/bin/clippy --sysconfdir=/etc/frr --localstatedir=/var/run/frr --with-moduledir=/usr/lib/frr/modules --enable-configfile-mask=0640 --enable-logfile-mask=0640 --enable-multipath=256 --disable-ospfclient --enable-shell-access --enable-user=frr --enable-group=frr --enable-vty-group=frrvty --enable-fpm --disable-bgp-bmp --disable-nhrpd --disable-capabilities --enable-config-rollbacks --disable-zeromq ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking build system type... x86_64-pc-linux-gnu checking host system type... arceb-buildroot-linux-uclibc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arceb-buildroot-linux-uclibc-strip... /bin/true checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for perl... /usr/bin/perl checking pkg-config is at least version 0.9.0... yes checking for arceb-buildroot-linux-uclibc-gcc... /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc accepts -g... yes checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc option to enable C11 features... none needed checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc... none checking how to run the C preprocessor... /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-cpp checking whether the compiler supports GNU C++... no checking whether no accepts -g... no checking for no option to enable C++11 features... unsupported checking for no option to enable C++98 features... unsupported checking dependency style of no... none checking pkg-config is at least version 0.9.0... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -fms-extensions... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -fno-omit-frame-pointer... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -funwind-tables... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wall... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wextra... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wformat-nonliteral... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wformat-security... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wstrict-prototypes... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wmissing-prototypes... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wmissing-declarations... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wpointer-arith... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wbad-function-cast... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wwrite-strings... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wundef... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wno-unused-result... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wno-unused-parameter... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wno-missing-field-initializers... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -Wc++-compat... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -fplugin=tools/gcc-plugins/frr-format.so... no checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -fplugin=frr-format... no checking whether linker supports __start/stop_section symbols... yes checking if compiler needs -Werror to reject unknown flags... no checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... no checking for library containing pthread_condattr_setclock... none required checking for pthread_np.h... no checking for pthread_setname_np... no checking for pthread_set_name_np... no checking for pthread_getthreadid_np... no checking whether ln -s works... yes checking for arceb-buildroot-linux-uclibc-ar... /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-ar checking how to print strings... printf checking for a sed that does not truncate output... sed checking for egrep... /usr/bin/egrep checking for fgrep... /usr/bin/fgrep checking for ld used by /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc... /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-ld checking if the linker (/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-nm checking the name lister (/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-nm) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arceb-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-ld option to reload object files... -r checking for arceb-buildroot-linux-uclibc-objdump... /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-objdump checking how to recognize dependent libraries... pass_all checking for arceb-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arceb-buildroot-linux-uclibc-ar... (cached) /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-ar checking for archiver @FILE support... @ checking for arceb-buildroot-linux-uclibc-strip... (cached) /bin/true checking for arceb-buildroot-linux-uclibc-ranlib... /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-ranlib checking command to parse /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-nm output from /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for arceb-buildroot-linux-uclibc-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc static flag -static works... yes checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -c -o file.o... yes checking if /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes checking whether the /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc linker (/home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-ar supports D option... yes checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc-ranlib supports D option... yes checking for json-c/json.h... yes checking for json_object_get in -ljson-c... yes checking python interpreter python3... /home/buildroot/autobuild/instance-0/output-1/host/bin/python3 (python3) checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/python3 module pytest is available... no checking whether /home/buildroot/autobuild/instance-0/output-1/host/bin/python3 module sphinx is executable... no checking if zebra should be configurable to send Route Advertisements... yes checking for arceb-buildroot-linux-uclibc-objcopy... /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-objcopy checking for .interp value to use... /lib/ld-uClibc.so.0 checking for stropts.h... no checking for sys/ksym.h... no checking for linux/version.h... yes checking for asm/types.h... yes checking for endian.h... yes checking for sys/endian.h... no checking for stdatomic.h... yes checking whether _Atomic qualifier works... yes checking for Linux futex() support... yes checking for net/if_var.h... no checking for netinet/in_var.h... no checking for net/if_dl.h... no checking for net/netopt.h... no checking for inet/nd.h... no checking for netinet/ip_icmp.h... yes checking for sys/sysctl.h... yes checking for sys/sockio.h... no checking for sys/conf.h... no checking for ucontext.h... yes checking for ucontext_t.uc_mcontext.uc_regs... no checking for ucontext_t.uc_mcontext.regs... no checking for ucontext_t.uc_mcontext.gregs... no checking which operating system interface to use... Linux checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc option to enable large file support... none needed checking for strlcat... yes checking for strlcpy... yes checking for getgrouplist... yes checking for openat... yes checking for unlinkat... yes checking for posix_fallocate... yes checking for sendmmsg... yes checking for explicit_bzero... no checking for struct mmsghdr.msg_hdr... yes checking for readline in -lreadline... yes checking for rl_clear_visible_line... yes checking for readline/history.h... yes checking for rl_completion_matches in -lreadline... yes checking for append_history in -lreadline... yes checking for library containing pow... none required checking for ppoll... yes checking for pollts... no checking for asm-generic/unistd.h... yes checking whether __NR_setns is declared... yes checking for setns... yes checking for net/bpf.h... no checking for sys/dlpi.h... no checking zebra IS-IS I/O method... pfpacket checking for struct ip_mreqn.imr_ifindex... yes checking for linux/mroute.h... yes checking for linux/mroute6.h... yes checking for netinet/ip_mroute.h... no checking for RFC3678 protocol-independed API... yes checking for net/if_media.h... no checking for struct if_data.ifi_link_state... no checking for netinet/tcp.h... yes checking whether TCP_MD5SIG is declared... yes checking for crypt in -lcrypt... yes checking for res_init in -lresolv... no checking for CARES (libcares)... no checking for struct utsname.domainname... yes checking for netinet6/in6.h... no checking for netinet/in6_var.h... no checking for netinet6/in6_var.h... no checking for netinet6/nd6.h... no checking for LIBYANG (libyang >= 2.0.0)... yes checking for struct lyd_node.priv... yes checking for SQLITE3 (sqlite3)... yes checking for pimd OS support... yes checking for pim6d OS support... yes checking for VRRP OS support... yes checking whether the RTR Library is compiled with SSH... no checking for library containing dlopen... none required checking for link.h... yes checking for dlinfo(RTLD_DI_ORIGIN)... no checking for dlinfo(RTLD_DI_LINKMAP)... no checking for struct sockaddr_dl... no checking for struct vifctl... yes checking for struct mfcctl... yes checking for struct sioc_sg_req... yes checking for vifi_t... yes checking for struct sioc_vif_req... yes checking for struct igmpmsg... yes checking for struct ifaliasreq... no checking for struct if6_aliasreq... no checking for struct in6_aliasreq... no checking for struct nd_opt_adv_interval... yes checking for struct nd_opt_homeagent_info... no checking for struct nd_opt_adv_interval... (cached) yes checking for struct nd_opt_rdnss... no checking for struct nd_opt_dnssl... no checking for struct sockaddr.sa_len... no checking for struct sockaddr_in.sin_len... no checking for struct sockaddr_un.sun_len... no checking for struct sockaddr_dl.sdl_len... no checking for struct if6_aliasreq.ifra_lifetime... no checking for struct nd_opt_adv_interval.nd_opt_ai_type... no checking for struct in_pktinfo... yes checking for struct icmphdr... yes checking for IP_PKTINFO... yes checking for IP_RECVDSTADDR... no checking for IP_RECVIF... no checking for SO_BINDANY... no checking for IP_FREEBIND... yes checking whether be32enc is declared... no checking whether be32dec is declared... no checking whether CLOCK_MONOTONIC is declared... yes checking for clock_gettime in -lrt... yes checking whether CLOCK_THREAD_CPUTIME_ID is declared... yes checking for library containing clock_nanosleep... none required checking for flex... flex checking for lex output file root... lex.yy checking for lex library... none needed checking whether yytext is a pointer... yes checking version of flex... 2.6.4 checking for bison... bison -y checking version of bison... 3.8.2 - 3.3 or newer configure: WARNING: Running FRR without libcap support built in causes a huge performance penalty. checking for UNWIND (libunwind)... no checking for unwind.h... yes checking for library containing unw_getcontext... no checking for execinfo.h... no checking for malloc.h... yes checking for malloc_np.h... no checking for malloc/malloc.h... no checking whether mallinfo is available... yes checking whether mallinfo2 is available... no checking whether malloc_usable_size is available... yes checking directory to use for state file... /var/run/frr checking for CU_initialize_registry in -lcunit... (cached) no checking for valgrind... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.version config.status: creating redhat/frr.spec config.status: creating alpine/APKBUILD config.status: creating snapcraft/snapcraft.yaml config.status: creating lib/version.h config.status: creating tests/lib/cli/test_cli.refout config.status: creating pkgsrc/bgpd.sh config.status: creating pkgsrc/ospf6d.sh config.status: creating pkgsrc/ospfd.sh config.status: creating pkgsrc/ripd.sh config.status: creating pkgsrc/ripngd.sh config.status: creating pkgsrc/zebra.sh config.status: creating pkgsrc/eigrpd.sh config.status: creating tools/frr config.status: creating tools/watchfrr.sh config.status: creating tools/frrinit.sh config.status: creating tools/frrcommon.sh config.status: creating tools/frr.service config.status: creating tools/frr@.service config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls FRRouting configuration ------------------------------ FRR version : 8.5.4 host operating system : linux-uclibc source code location : . compiler : /home/buildroot/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc compiler flags : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -DFRR_XREF_NO_NOTE -fms-extensions -fno-omit-frame-pointer -funwind-tables -Wall -Wextra -Wformat-nonliteral -Wformat-security -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wundef -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers make : make linker flags : -g -latomic -ljson-c -lrt -lreadline state file directory : /var/run/frr config file directory : /etc/frr module directory : /usr/lib/frr/modules script directory : /etc/frr/scripts user to run as : frr group to run as : frr group for vty sockets : frrvty config file mask : 0640 log file mask : 0640 zebra protobuf enabled : no vici socket path : /var/run/charon.vici The above user and group must have read/write access to the state file directory and to the config files in the config file directory. configure: WARNING: pytest is missing, unit tests cannot be performed >>> frr 8.5.4 Building GIT_DIR=. PATH="/home/buildroot/autobuild/instance-0/output-1/host/bin:/home/buildroot/autobuild/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/ make[1]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4' true /usr/bin/perl ./lib/route_types.pl --enabled babeld --enabled bfdd --enabled bgpd --enabled bgpd-vnc --enabled eigrpd --enabled isisd --enabled fabricd --enabled ldpd --enabled ospfd --enabled ospf6d --enabled pbrd --enabled pimd --enabled ripd --enabled ripngd --enabled zebra < ./lib/route_types.txt > lib/route_types.h /usr/bin/perl ./vtysh/daemons.pl zebra bgpd ripd ripngd ospfd ospf6d isisd fabricd ldpd babeld eigrpd pimd pim6d pbrd staticd bfdd vrrpd pathd > vtysh/vtysh_daemons.h /usr/bin/make all-am make[2]: Entering directory '/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4' LEX lib/command_lex.c YACC lib/command_parse.c CLIPPY lib/filter_cli_clippy.c CC lib/filter_nb.lo CC lib/frrcu.lo CC lib/frrlua.lo CC lib/frrscript.lo CC lib/frr_pthread.lo CC lib/frrstr.lo CC lib/getopt.lo CC lib/getopt1.lo CC lib/grammar_sandbox.lo CC lib/graph.lo CC lib/hash.lo CC lib/hook.lo CC lib/id_alloc.lo CLIPPY lib/if_clippy.c CC lib/if_rmap.lo CC lib/imsg-buffer.lo CC lib/imsg.lo CC lib/jhash.lo CC lib/json.lo CC lib/keychain.lo CC lib/ldp_sync.lo CC lib/lib_errors.lo CC lib/lib_vty.lo CC lib/libfrr.lo CC lib/libfrr_trace.lo CC lib/linklist.lo CC lib/link_state.lo CC lib/log.lo CC lib/log_filter.lo CLIPPY lib/log_vty_clippy.c CC lib/md5.lo CC lib/memory.lo CC lib/mlag.lo CC lib/module.lo CC lib/mpls.lo CC lib/srv6.lo CC lib/network.lo CC lib/nexthop.lo CC lib/netns_linux.lo CC lib/netns_other.lo CLIPPY lib/nexthop_group_clippy.c CC lib/northbound.lo CLIPPY lib/northbound_cli_clippy.c CC lib/northbound_db.lo CC lib/ntop.lo CC lib/openbsd-tree.lo CC lib/pid_output.lo CLIPPY lib/plist_clippy.c CC lib/prefix.lo CC lib/privs.lo CC lib/ptm_lib.lo CC lib/pullwr.lo CC lib/qobj.lo CC lib/ringbuf.lo CLIPPY lib/routemap_clippy.c CLIPPY lib/routemap_cli_clippy.c CC lib/routemap_northbound.lo CC lib/sbuf.lo CC lib/seqlock.lo CC lib/sha256.lo CC lib/sigevent.lo CC lib/skiplist.lo CC lib/sockopt.lo CC lib/sockunion.lo CC lib/spf_backoff.lo CC lib/srcdest_table.lo CC lib/stream.lo CC lib/strformat.lo CC lib/strlcat.lo CC lib/strlcpy.lo CC lib/systemd.lo CC lib/table.lo CC lib/termtable.lo CLIPPY lib/thread_clippy.c CC lib/typerb.lo CC lib/typesafe.lo CC lib/vector.lo CC lib/vrf.lo CLIPPY lib/vty_clippy.c CC lib/wheel.lo CC lib/workqueue.lo CC lib/xref.lo CC lib/yang.lo CC lib/yang_translator.lo CC lib/yang_wrappers.lo CC lib/zclient.lo CC lib/zlog.lo CC lib/zlog_5424.lo CLIPPY lib/zlog_5424_cli_clippy.c CC lib/zlog_live.lo CC lib/zlog_targets.lo CC lib/routing_nb.lo CC lib/routing_nb_config.lo CC lib/tc.lo CC lib/db.lo GEN yang/frr-filter.yang.c GEN yang/frr-interface.yang.c GEN yang/frr-route-map.yang.c GEN yang/frr-route-types.yang.c GEN yang/frr-vrf.yang.c GEN yang/frr-routing.yang.c GEN yang/frr-nexthop.yang.c GEN yang/ietf/ietf-routing-types.yang.c GEN yang/ietf/ietf-interfaces.yang.c GEN yang/ietf/ietf-bgp-types.yang.c GEN yang/frr-module-translator.yang.c CLIPPY vtysh/vtysh_clippy.c CLIPPY zebra/debug_clippy.c CC zebra/if_ioctl.o CC zebra/if_netlink.o CC zebra/if_socket.o CC zebra/if_sysctl.o CLIPPY zebra/interface_clippy.c CC zebra/ioctl.o CC zebra/ipforward_proc.o CC zebra/ipforward_sysctl.o CC zebra/kernel_netlink.o CC zebra/kernel_socket.o CC zebra/label_manager.o CC zebra/main.o CC zebra/netconf_netlink.o CC zebra/redistribute.o CC zebra/router-id.o CC zebra/rt_netlink.o CC zebra/rt_socket.o CLIPPY zebra/rtadv_clippy.c CC zebra/rtread_netlink.o CC zebra/rtread_sysctl.o CC zebra/rule_netlink.o CC zebra/rule_socket.o CC zebra/table_manager.o CC zebra/tc_netlink.o CC zebra/tc_socket.o CC zebra/zapi_msg.o CC zebra/zebra_dplane.o CC zebra/zebra_errors.o CC zebra/zebra_gr.o CC zebra/zebra_l2.o CC zebra/zebra_evpn.o CC zebra/zebra_evpn_mac.o CC zebra/zebra_evpn_neigh.o CC zebra/zebra_mlag.o CLIPPY zebra/zebra_mlag_vty_clippy.c CC zebra/zebra_mpls.o CC zebra/zebra_mpls_netlink.o CC zebra/zebra_mpls_openbsd.o CC zebra/zebra_mpls_null.o CC zebra/zebra_mpls_vty.o CC zebra/zebra_srv6.o CLIPPY zebra/zebra_srv6_vty_clippy.c CC zebra/zebra_mroute.o CC zebra/zebra_nb.o CC zebra/zebra_nb_config.o CC zebra/zebra_nb_rpcs.o CC zebra/zebra_nb_state.o CC zebra/zebra_netns_id.o CC zebra/zebra_netns_notify.o CC zebra/zebra_nhg.o CC zebra/zebra_ns.o CC zebra/zebra_opaque.o CC zebra/zebra_pbr.o CC zebra/zebra_ptm.o CC zebra/zebra_ptm_redistribute.o CC zebra/zebra_pw.o CC zebra/zebra_rib.o CC zebra/zebra_router.o CC zebra/zebra_rnh.o CLIPPY zebra/zebra_routemap_clippy.c CC zebra/zebra_routemap_nb.o CC zebra/zebra_routemap_nb_config.o CC zebra/zebra_script.o CC zebra/zebra_srte.o CC zebra/zebra_tc.o CC zebra/zebra_trace.o CLIPPY zebra/zebra_vrf_clippy.c CLIPPY zebra/zebra_vty_clippy.c CC zebra/zebra_vxlan.o CLIPPY zebra/zebra_evpn_mh_clippy.c CC zebra/zebra_neigh.o CC zebra/zserv.o CC zebra/debug_nl.o GEN yang/frr-zebra.yang.c GEN yang/frr-zebra-route-map.yang.c CLIPPY watchfrr/watchfrr_vty_clippy.c GEN yang/frr-bgp-types.yang.c GEN yang/frr-bgp.yang.c GEN yang/frr-bgp-common-structure.yang.c GEN yang/frr-bgp-common.yang.c GEN yang/frr-bgp-common-multiprotocol.yang.c GEN yang/frr-bgp-neighbor.yang.c GEN yang/frr-bgp-peer-group.yang.c GEN yang/frr-bgp-bmp.yang.c GEN yang/frr-bgp-rpki.yang.c GEN yang/frr-deviations-bgp-datacenter.yang.c GEN yang/frr-bgp-filter.yang.c GEN yang/frr-bgp-route-map.yang.c CC bgpd/bgp_addpath.o CC bgpd/bgp_advertise.o CC bgpd/bgp_aspath.o CC bgpd/bgp_attr.o CC bgpd/bgp_attr_evpn.o CC bgpd/bgp_bfd.o CC bgpd/bgp_clist.o CC bgpd/bgp_community.o CC bgpd/bgp_community_alias.o CC bgpd/bgp_conditional_adv.o CC bgpd/bgp_damp.o CLIPPY bgpd/bgp_debug_clippy.c CC bgpd/bgp_dump.o CC bgpd/bgp_ecommunity.o CC bgpd/bgp_encap_tlv.o CC bgpd/bgp_errors.o CC bgpd/bgp_evpn.o CC bgpd/bgp_evpn_mh.o CLIPPY bgpd/bgp_evpn_vty_clippy.c CC bgpd/bgp_filter.o CC bgpd/bgp_flowspec.o CC bgpd/bgp_flowspec_util.o CC bgpd/bgp_flowspec_vty.o CC bgpd/bgp_fsm.o CC bgpd/bgp_io.o CC bgpd/bgp_keepalives.o CC bgpd/bgp_label.o CLIPPY bgpd/bgp_labelpool_clippy.c CC bgpd/bgp_lcommunity.o CC bgpd/bgp_mac.o CC bgpd/bgp_memory.o CC bgpd/bgp_mpath.o CC bgpd/bgp_mplsvpn.o CC bgpd/bgp_network.o CLIPPY bgpd/bgp_nexthop_clippy.c CC bgpd/bgp_nht.o CC bgpd/bgp_open.o CC bgpd/bgp_packet.o CC bgpd/bgp_pbr.o CC bgpd/bgp_rd.o CC bgpd/bgp_regex.o CLIPPY bgpd/bgp_route_clippy.c CLIPPY bgpd/bgp_routemap_clippy.c CC bgpd/bgp_routemap_nb.o CC bgpd/bgp_routemap_nb_config.o CC bgpd/bgp_script.o CC bgpd/bgp_table.o CC bgpd/bgp_updgrp.o CC bgpd/bgp_updgrp_adv.o CC bgpd/bgp_updgrp_packet.o CC bgpd/bgp_vpn.o CLIPPY bgpd/bgp_vty_clippy.c CC bgpd/bgp_zebra.o CC bgpd/bgpd.o CC bgpd/bgp_trace.o CLIPPY ripd/rip_cli_clippy.c CC ripd/rip_debug.o CC ripd/rip_errors.o CC ripd/rip_interface.o CC ripd/rip_offset.o CC ripd/rip_main.o CC ripd/rip_nb.o CC ripd/rip_nb_config.o CC ripd/rip_nb_rpcs.o CC ripd/rip_nb_notifications.o CC ripd/rip_nb_state.o CC ripd/rip_peer.o CC ripd/rip_routemap.o CC ripd/rip_zebra.o CC ripd/ripd.o GEN yang/frr-ripd.yang.c CLIPPY ripngd/ripng_cli_clippy.c CC ripngd/ripng_debug.o CC ripngd/ripng_interface.o CC ripngd/ripng_nexthop.o CC ripngd/ripng_offset.o CC ripngd/ripng_main.o CC ripngd/ripng_nb.o CC ripngd/ripng_nb_config.o CC ripngd/ripng_nb_rpcs.o CC ripngd/ripng_nb_state.o CC ripngd/ripng_peer.o CC ripngd/ripng_route.o CC ripngd/ripng_routemap.o CC ripngd/ripng_zebra.o CC ripngd/ripngd.o GEN yang/frr-ripngd.yang.c GEN yang/frr-ospf-route-map.yang.c CC ospfd/ospf_abr.o CC ospfd/ospf_api.o CC ospfd/ospf_apiserver.o CC ospfd/ospf_asbr.o CC ospfd/ospf_ase.o CC ospfd/ospf_bfd.o CLIPPY ospfd/ospf_dump_clippy.c CC ospfd/ospf_dump_api.o CC ospfd/ospf_errors.o CC ospfd/ospf_ext.o CC ospfd/ospf_flood.o CLIPPY ospfd/ospf_gr_clippy.c CC ospfd/ospf_ia.o CC ospfd/ospf_interface.o CC ospfd/ospf_ism.o CLIPPY ospfd/ospf_ldp_sync_clippy.c CC ospfd/ospf_lsa.o CC ospfd/ospf_lsdb.o CC ospfd/ospf_memory.o CC ospfd/ospf_neighbor.o CC ospfd/ospf_network.o CC ospfd/ospf_nsm.o CC ospfd/ospf_opaque.o CC ospfd/ospf_packet.o CC ospfd/ospf_ri.o CC ospfd/ospf_route.o CC ospfd/ospf_routemap.o CC ospfd/ospf_routemap_nb.o CC ospfd/ospf_routemap_nb_config.o CC ospfd/ospf_spf.o CC ospfd/ospf_ti_lfa.o CC ospfd/ospf_sr.o CC ospfd/ospf_te.o CLIPPY ospfd/ospf_vty_clippy.c CC ospfd/ospf_zebra.o CC ospfd/ospfd.o CC ospfd/ospf_gr_helper.o AR ospfd/libfrrospfclient.a GEN yang/frr-ospf6-route-map.yang.c In function 'ospf_te_parse_ri', inlined from 'ospf_te_parse_opaque_lsa' at ospfd/ospf_te.c:2933:8: ospfd/ospf_te.c:2500:47: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 2500 | node->algo[i] = SR_ALGORITHM_UNSET; In file included from ospfd/ospf_te.c:46: ospfd/ospf_te.c: In function 'ospf_te_parse_opaque_lsa': ./lib/link_state.h:138:17: note: at offset 2 into destination object 'algo' of size 2 138 | uint8_t algo[2]; /* Segment Routing Algorithms */ | ^~~~ CLIPPY ospf6d/ospf6_nssa_clippy.c CC ospf6d/ospf6_abr.o CLIPPY ospf6d/ospf6_area_clippy.c CLIPPY ospf6d/ospf6_asbr_clippy.c CC ospf6d/ospf6_routemap_nb.o CC ospf6d/ospf6_routemap_nb_config.o CC ospf6d/ospf6_bfd.o CC ospf6d/ospf6_flood.o CLIPPY ospf6d/ospf6_gr_clippy.c CLIPPY ospf6d/ospf6_gr_helper_clippy.c CC ospf6d/ospf6_interface.o CC ospf6d/ospf6_intra.o CLIPPY ospf6d/ospf6_lsa_clippy.c CC ospf6d/ospf6_lsdb.o CC ospf6d/ospf6_message.o CC ospf6d/ospf6_neighbor.o CC ospf6d/ospf6_network.o CC ospf6d/ospf6_proto.o CLIPPY ospf6d/ospf6_route_clippy.c CC ospf6d/ospf6_spf.o CLIPPY ospf6d/ospf6_top_clippy.c CC ospf6d/ospf6_zebra.o CC ospf6d/ospf6d.o CC ospf6d/ospf6_auth_trailer.o GEN yang/frr-isisd.yang.c CC isisd/isis_adjacency.o CC isisd/isis_bfd.o CC isisd/isis_circuit.o CC isisd/isis_csm.o CC isisd/isis_dr.o CC isisd/isis_dynhn.o CC isisd/isis_errors.o CC isisd/isis_events.o CC isisd/isis_flags.o CC isisd/isis_ldp_sync.o CC isisd/isis_lfa.o CC isisd/isis_lsp.o CC isisd/isis_misc.o CC isisd/isis_mt.o CC isisd/isis_pdu.o CC isisd/isis_pdu_counter.o CC isisd/isis_redist.o CC isisd/isis_route.o CC isisd/isis_routemap.o CC isisd/isis_spf.o CC isisd/isis_sr.o CC isisd/isis_te.o CC isisd/isis_tlvs.o CC isisd/isis_tx_queue.o CC isisd/isis_zebra.o CC isisd/isisd.o CC isisd/iso_checksum.o CC isisd/fabricd.o CC isisd/isis_nb.o CC isisd/isis_nb_config.o CC isisd/isis_nb_notifications.o CC isisd/isis_nb_state.o CLIPPY isisd/isis_cli_clippy.c CC isisd/fabricd-isis_bpf.o CC isisd/fabricd-isis_dlpi.o CC isisd/fabricd-isis_main.o CC isisd/fabricd-isis_pfpacket.o CC isisd/libfabric_a-isis_adjacency.o CC isisd/libfabric_a-isis_bfd.o CC isisd/libfabric_a-isis_circuit.o CC isisd/libfabric_a-isis_csm.o CC isisd/libfabric_a-isis_dr.o CC isisd/libfabric_a-isis_dynhn.o CC isisd/libfabric_a-isis_errors.o CC isisd/libfabric_a-isis_events.o CC isisd/libfabric_a-isis_flags.o CC isisd/libfabric_a-isis_ldp_sync.o CC isisd/libfabric_a-isis_lfa.o CC isisd/libfabric_a-isis_lsp.o CC isisd/libfabric_a-isis_misc.o CC isisd/libfabric_a-isis_mt.o CC isisd/libfabric_a-isis_pdu.o CC isisd/libfabric_a-isis_pdu_counter.o CC isisd/libfabric_a-isis_redist.o CC isisd/libfabric_a-isis_route.o CC isisd/libfabric_a-isis_routemap.o CC isisd/libfabric_a-isis_spf.o CC isisd/libfabric_a-isis_sr.o CC isisd/libfabric_a-isis_te.o CC isisd/libfabric_a-isis_tlvs.o CC isisd/libfabric_a-isis_tx_queue.o CC isisd/libfabric_a-isis_zebra.o CC isisd/libfabric_a-isisd.o CC isisd/libfabric_a-iso_checksum.o CC isisd/libfabric_a-fabricd.o CC isisd/libfabric_a-isis_vty_fabricd.o CLIPPY ldpd/ldp_vty_cmds_clippy.c CC ldpd/ldp_vty_conf.o CC ldpd/ldp_vty_exec.o CC ldpd/ldp_zebra.o CC ldpd/ldpe.o CC ldpd/log.o CC ldpd/logmsg.o CC ldpd/neighbor.o CC ldpd/notification.o CC ldpd/packet.o CC ldpd/pfkey.o CC ldpd/rlfa.o CC ldpd/socket.o CC ldpd/util.o CLIPPY babeld/babel_interface_clippy.c CC babeld/babel_main.o CC babeld/babel_zebra.o CLIPPY babeld/babeld_clippy.c CC babeld/kernel.o CC babeld/message.o CC babeld/neighbour.o CC babeld/net.o CC babeld/resend.o CC babeld/route.o CC babeld/source.o CC babeld/util.o CC babeld/xroute.o CLIPPY eigrpd/eigrp_cli_clippy.c CC eigrpd/eigrp_dump.o CC eigrpd/eigrp_errors.o CC eigrpd/eigrp_filter.o CC eigrpd/eigrp_fsm.o CC eigrpd/eigrp_hello.o CC eigrpd/eigrp_interface.o CC eigrpd/eigrp_main.o CC eigrpd/eigrp_metric.o CC eigrpd/eigrp_neighbor.o CC eigrpd/eigrp_network.o CC eigrpd/eigrp_northbound.o CC eigrpd/eigrp_packet.o CC eigrpd/eigrp_query.o CC eigrpd/eigrp_reply.o CC eigrpd/eigrp_siaquery.o CC eigrpd/eigrp_siareply.o CC eigrpd/eigrp_snmp.o CC eigrpd/eigrp_topology.o CC eigrpd/eigrp_update.o CC eigrpd/eigrp_vrf.o CLIPPY eigrpd/eigrp_vty_clippy.c CC eigrpd/eigrp_zebra.o CC eigrpd/eigrpd.o GEN yang/frr-eigrpd.yang.c CC pimd/pimd-pim_addr.o CC pimd/pimd-pim_assert.o CC pimd/pimd-pim_bfd.o CC pimd/pimd-pim_bsm.o CC pimd/pimd-pim_cmd_common.o CC pimd/pimd-pim_errors.o CC pimd/pimd-pim_hello.o CC pimd/pimd-pim_iface.o CC pimd/pimd-pim_ifchannel.o CC pimd/pimd-pim_instance.o CC pimd/pimd-pim_int.o CC pimd/pimd-pim_join.o CC pimd/pimd-pim_jp_agg.o CC pimd/pimd-pim_macro.o CC pimd/pimd-pim_memory.o CC pimd/pimd-pim_mroute.o CC pimd/pimd-pim_msg.o CC pimd/pimd-pim_nb.o CC pimd/pimd-pim_nb_config.o CC pimd/pimd-pim_neighbor.o CC pimd/pimd-pim_nht.o CC pimd/pimd-pim_oil.o CC pimd/pimd-pim_pim.o CC pimd/pimd-pim_routemap.o CC pimd/pimd-pim_rp.o CC pimd/pimd-pim_rpf.o CC pimd/pimd-pim_sock.o CC pimd/pimd-pim_ssm.o CC pimd/pimd-pim_ssmpingd.o CC pimd/pimd-pim_static.o CC pimd/pimd-pim_str.o CC pimd/pimd-pim_tib.o CC pimd/pimd-pim_time.o CC pimd/pimd-pim_tlv.o CC pimd/pimd-pim_upstream.o CC pimd/pimd-pim_util.o CC pimd/pimd-pim_vty.o CC pimd/pimd-pim_zebra.o CC pimd/pimd-pim_zlookup.o CC pimd/pimd-pim_vxlan.o CC pimd/pimd-pim_register.o CC pimd/pimd-pimd.o CLIPPY pimd/pim_cmd_clippy.c CC pimd/pimd-pim_igmp.o CC pimd/pimd-pim_igmp_mtrace.o CC pimd/pimd-pim_igmp_stats.o CC pimd/pimd-pim_igmpv2.o CC pimd/pimd-pim_igmpv3.o CC pimd/pimd-pim_main.o CC pimd/pimd-pim_mlag.o CC pimd/pimd-pim_msdp.o CC pimd/pimd-pim_msdp_packet.o CC pimd/pimd-pim_msdp_socket.o CC pimd/pimd-pim_signals.o CC pimd/pimd-pim_zpthread.o GEN yang/frr-pim.yang.c GEN yang/frr-pim-rp.yang.c GEN yang/frr-gmp.yang.c CC pimd/pim6d-pim_addr.o CC pimd/pim6d-pim_assert.o CC pimd/pim6d-pim_bfd.o CC pimd/pim6d-pim_bsm.o CC pimd/pim6d-pim_cmd_common.o CC pimd/pim6d-pim_errors.o CC pimd/pim6d-pim_hello.o CC pimd/pim6d-pim_iface.o CC pimd/pim6d-pim_ifchannel.o CC pimd/pim6d-pim_instance.o CC pimd/pim6d-pim_int.o CC pimd/pim6d-pim_join.o CC pimd/pim6d-pim_jp_agg.o CC pimd/pim6d-pim_macro.o CC pimd/pim6d-pim_memory.o CC pimd/pim6d-pim_mroute.o CC pimd/pim6d-pim_msg.o CC pimd/pim6d-pim_nb.o CC pimd/pim6d-pim_nb_config.o CC pimd/pim6d-pim_neighbor.o CC pimd/pim6d-pim_nht.o CC pimd/pim6d-pim_oil.o CC pimd/pim6d-pim_pim.o CC pimd/pim6d-pim_routemap.o CC pimd/pim6d-pim_rp.o CC pimd/pim6d-pim_rpf.o CC pimd/pim6d-pim_sock.o CC pimd/pim6d-pim_ssm.o CC pimd/pim6d-pim_ssmpingd.o CC pimd/pim6d-pim_static.o CC pimd/pim6d-pim_str.o CC pimd/pim6d-pim_tib.o CC pimd/pim6d-pim_time.o CC pimd/pim6d-pim_tlv.o CC pimd/pim6d-pim_upstream.o CC pimd/pim6d-pim_util.o CC pimd/pim6d-pim_vty.o CC pimd/pim6d-pim_zebra.o CC pimd/pim6d-pim_zlookup.o CC pimd/pim6d-pim_vxlan.o CC pimd/pim6d-pim_register.o CC pimd/pim6d-pimd.o CC pimd/pim6d-pim6_main.o CLIPPY pimd/pim6_mld_clippy.c CLIPPY pimd/pim6_cmd_clippy.c CC yang/pimd_pim6d-frr-pim.yang.o CC yang/pimd_pim6d-frr-pim-rp.yang.o CC yang/pimd_pim6d-frr-gmp.yang.o CLIPPY pbrd/pbr_vty_clippy.c CC pbrd/pbr_map.o CC pbrd/pbr_memory.o CC pbrd/pbr_nht.o CLIPPY pbrd/pbr_debug_clippy.c CC pbrd/pbr_vrf.o GEN yang/frr-bfdd.yang.c GEN yang/frr-staticd.yang.c CC staticd/static_bfd.o CC staticd/static_debug.o CC staticd/static_nht.o CC staticd/static_routes.o CC staticd/static_zebra.o CC staticd/static_vrf.o CLIPPY staticd/static_vty_clippy.c CC staticd/static_nb.o CC staticd/static_nb_config.o CLIPPY bfdd/bfdd_vty_clippy.c CLIPPY bfdd/bfdd_cli_clippy.c CC bfdd/bfd_packet.o CC bfdd/config.o CC bfdd/control.o CC bfdd/dplane.o CC bfdd/event.o CC bfdd/ptm_adapter.o CLIPPY vrrpd/vrrp_vty_clippy.c CC vrrpd/vrrp_zebra.o GEN yang/frr-vrrpd.yang.c GEN yang/frr-pathd.yang.c CLIPPY pathd/path_cli_clippy.c CC pathd/path_debug.o CC pathd/path_errors.o CC pathd/path_nb.o CC pathd/path_nb_config.o CC pathd/path_nb_state.o CLIPPY pathd/path_ted_clippy.c CC pathd/path_zebra.o CC pathd/pathd.o CC zebra/irdp_interface.lo CC zebra/irdp_main.lo CC zebra/irdp_packet.lo CC zebra/zebra_fpm.lo CC zebra/zebra_fpm_netlink.lo CC zebra/zebra_mlag_private.lo CC zebra/dplane_fpm_nl.lo CC pathd/pathd_pcep_la-path_pcep.lo CLIPPY pathd/path_pcep_cli_clippy.c CC pathd/pathd_pcep_la-path_pcep_controller.lo CC pathd/pathd_pcep_la-path_pcep_debug.lo CC pathd/pathd_pcep_la-path_pcep_lib.lo CC pathd/pathd_pcep_la-path_pcep_config.lo CC pathd/pathd_pcep_la-path_pcep_pcc.lo CC lib/grammar_sandbox_main.o CC bgpd/bgp_btoa.o CC pimd/test_igmpv3_join.o CC pceplib/pcep_pcc.o CC tools/ssd-start-stop-daemon.o CCLD pceplib/libsocket_comm_mock.la CC pimd/mtracebis-mtracebis.o CC pimd/mtracebis-mtracebis_netlink.o CC pimd/mtracebis-mtracebis_routeget.o CC lib/agg_table.lo CC lib/atomlist.lo CC lib/base64.lo CC lib/bfd.lo CC lib/buffer.lo CC lib/checksum.lo CC lib/command.lo CC lib/command_graph.lo CC lib/command_match.lo CC lib/cspf.lo CC lib/csv.lo CC lib/debug.lo CC lib/defaults.lo CC lib/distribute.lo CC lib/explicit_bzero.lo CC lib/ferr.lo CC lib/filter.lo CC lib/filter_cli.lo CC lib/if.lo CC lib/log_vty.lo CC lib/nexthop_group.lo CC lib/northbound_cli.lo CC lib/plist.lo CC lib/routemap.lo CC lib/routemap_cli.lo CC lib/thread.lo CC lib/vty.lo CC lib/zlog_5424_cli.lo CC lib/printf/printf-pos.lo CC lib/printf/vfprintf.lo CC lib/printf/glue.lo CC yang/frr-filter.yang.lo CC yang/frr-interface.yang.lo CC yang/frr-route-map.yang.lo CC yang/frr-route-types.yang.lo CC yang/frr-vrf.yang.lo CC yang/frr-routing.yang.lo CC yang/frr-nexthop.yang.lo CC yang/ietf/ietf-routing-types.yang.lo CC yang/ietf/ietf-interfaces.yang.lo CC yang/ietf/ietf-bgp-types.yang.lo CC yang/frr-module-translator.yang.lo CC vtysh/vtysh_main.o CC vtysh/vtysh.o CC vtysh/vtysh_user.o CC vtysh/vtysh_config.o CC zebra/connected.o CC zebra/debug.o CC zebra/interface.o CC zebra/rtadv.o CC zebra/zebra_mlag_vty.o CC zebra/zebra_srv6_vty.o CC zebra/zebra_routemap.o CC zebra/zebra_vrf.o CC zebra/zebra_vty.o CC zebra/zebra_evpn_mh.o CC yang/frr-zebra.yang.o CC yang/frr-zebra-route-map.yang.o CC watchfrr/watchfrr.o CC watchfrr/watchfrr_errors.o CC watchfrr/watchfrr_vty.o CC bgpd/bgp_main.o CC yang/frr-bgp-types.yang.o CC yang/frr-bgp.yang.o CC yang/frr-bgp-common-structure.yang.o CC yang/frr-bgp-common.yang.o CC yang/frr-bgp-common-multiprotocol.yang.o CC yang/frr-bgp-neighbor.yang.o CC yang/frr-bgp-peer-group.yang.o CC yang/frr-bgp-bmp.yang.o CC yang/frr-bgp-rpki.yang.o CC yang/frr-deviations-bgp-datacenter.yang.o CC yang/frr-bgp-filter.yang.o CC yang/frr-bgp-route-map.yang.o CC bgpd/bgp_debug.o CC bgpd/bgp_evpn_vty.o CC bgpd/bgp_labelpool.o CC bgpd/bgp_nexthop.o CC bgpd/bgp_route.o CC bgpd/bgp_routemap.o CC bgpd/bgp_vty.o CC bgpd/rfapi/bgp_rfapi_cfg.o CC bgpd/rfapi/rfapi_import.o CC bgpd/rfapi/rfapi.o CC bgpd/rfapi/rfapi_ap.o CC bgpd/rfapi/rfapi_descriptor_rfp_utils.o CC bgpd/rfapi/rfapi_encap_tlv.o CC bgpd/rfapi/rfapi_nve_addr.o CC bgpd/rfapi/rfapi_monitor.o CC bgpd/rfapi/rfapi_rib.o CC bgpd/rfapi/rfapi_vty.o CC bgpd/rfapi/vnc_debug.o CC bgpd/rfapi/vnc_export_bgp.o CC bgpd/rfapi/vnc_export_table.o CC bgpd/rfapi/vnc_import_bgp.o CC bgpd/rfapi/vnc_zebra.o CC bgpd/rfp-example/librfp/rfp_example.o CC ripd/rip_cli.o CC yang/frr-ripd.yang.o CC ripngd/ripng_cli.o CC yang/frr-ripngd.yang.o CC ospfd/ospf_main.o CC yang/frr-ospf-route-map.yang.o CC ospfd/ospf_dump.o CC ospfd/ospf_gr.o CC ospfd/ospf_ldp_sync.o CC ospfd/ospf_vty.o CC ospf6d/ospf6_main.o CC yang/frr-ospf6-route-map.yang.o CC ospf6d/ospf6_nssa.o CC ospf6d/ospf6_area.o CC ospf6d/ospf6_asbr.o CC ospf6d/ospf6_gr.o CC ospf6d/ospf6_gr_helper.o CC ospf6d/ospf6_lsa.o CC ospf6d/ospf6_route.o CC ospf6d/ospf6_top.o CC isisd/isis_bpf.o CC isisd/isis_dlpi.o CC isisd/isis_main.o CC isisd/isis_pfpacket.o CC yang/frr-isisd.yang.o CC isisd/isis_cli.o AR isisd/libfabric.a CC ldpd/ldpd.o CC ldpd/accept.o CC ldpd/address.o CC ldpd/adjacency.o CC ldpd/control.o CC ldpd/hello.o CC ldpd/init.o CC ldpd/interface.o CC ldpd/keepalive.o CC ldpd/l2vpn.o CC ldpd/labelmapping.o CC ldpd/lde.o CC ldpd/lde_lib.o CC ldpd/ldp_debug.o CC ldpd/ldp_vty_cmds.o CC babeld/babel_errors.o CC babeld/babel_filter.o CC babeld/babel_interface.o CC babeld/babeld.o CC eigrpd/eigrp_cli.o CC eigrpd/eigrp_vty.o CC yang/frr-eigrpd.yang.o CC pimd/pimd-pim_cmd.o CC yang/pimd_pimd-frr-pim.yang.o CC yang/pimd_pimd-frr-pim-rp.yang.o CC yang/pimd_pimd-frr-gmp.yang.o CC pimd/pim6d-pim6_mld.o CC pimd/pim6d-pim6_cmd.o In file included from ./lib/zebra.h:28, from pimd/pim6_mld.c:28: ./lib/compiler.h:225:26: note: '#pragma message: TODO: S,G entries in EXCLUDE (i.e. prune) unsupported' 225 | #define CPP_NOTICE(text) _Pragma(CPP_STR(message text)) | ^~~~~~~ pimd/pim6_mld.c:360:1: note: in expansion of macro 'CPP_NOTICE' 360 | CPP_NOTICE("TODO: S,G entries in EXCLUDE (i.e. prune) unsupported"); | ^~~~~~~~~~ pimd/pim6_mld.c: In function 'gm_handle_v2_pass1': ./lib/compiler.h:225:26: note: '#pragma message: need S,G PRUNE => NO_INFO transition here' 225 | #define CPP_NOTICE(text) _Pragma(CPP_STR(message text)) | ^~~~~~~ pimd/pim6_mld.c:655:25: note: in expansion of macro 'CPP_NOTICE' 655 | CPP_NOTICE("need S,G PRUNE => NO_INFO transition here"); | ^~~~~~~~~~ pimd/pim6_mld.c: At top level: ./lib/compiler.h:225:26: note: '#pragma message: TODO: QRV/QQIC are not copied from queries to local state' 225 | #define CPP_NOTICE(text) _Pragma(CPP_STR(message text)) | ^~~~~~~ pimd/pim6_mld.c:803:1: note: in expansion of macro 'CPP_NOTICE' 803 | CPP_NOTICE("TODO: QRV/QQIC are not copied from queries to local state"); | ^~~~~~~~~~ pimd/pim6_mld.c: In function 'gm_handle_v1_report': ./lib/compiler.h:225:26: note: '#pragma message: set v1-seen timer on grp here' 225 | #define CPP_NOTICE(text) _Pragma(CPP_STR(message text)) | ^~~~~~~ pimd/pim6_mld.c:950:9: note: in expansion of macro 'CPP_NOTICE' 950 | CPP_NOTICE("set v1-seen timer on grp here"); | ^~~~~~~~~~ pimd/pim6_mld.c: In function 'gm_handle_v1_leave': ./lib/compiler.h:225:26: note: '#pragma message: need S,G PRUNE => NO_INFO transition here' 225 | #define CPP_NOTICE(text) _Pragma(CPP_STR(message text)) | ^~~~~~~ pimd/pim6_mld.c:1013:25: note: in expansion of macro 'CPP_NOTICE' 1013 | CPP_NOTICE("need S,G PRUNE => NO_INFO transition here"); | ^~~~~~~~~~ CC pbrd/pbr_main.o CC pbrd/pbr_zebra.o CC pbrd/pbr_vty.o pimd/pim6_mld.c: In function 'gm_show_joins_vrf': pimd/pim6_mld.c:2837:25: warning: 'js_vrf' may be used uninitialized in this function [-Wmaybe-uninitialized] 2837 | json_object_object_add(js_vrf, ifp->name, js_if); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC pbrd/pbr_debug.o CC staticd/static_main.o CC yang/frr-bfdd.yang.o CC yang/frr-staticd.yang.o CC staticd/static_vty.o CC bfdd/bfdd.o CC bfdd/bfd.o CC bfdd/bfdd_nb.o CC bfdd/bfdd_nb_config.o CC bfdd/bfdd_nb_state.o CC bfdd/bfdd_vty.o CC bfdd/bfdd_cli.o CC vrrpd/vrrp.o CC vrrpd/vrrp_arp.o CC vrrpd/vrrp_debug.o CC vrrpd/vrrp_main.o CC vrrpd/vrrp_ndisc.o CC vrrpd/vrrp_northbound.o CC vrrpd/vrrp_packet.o CC vrrpd/vrrp_vty.o CC yang/frr-vrrpd.yang.o CC pathd/path_main.o CC yang/frr-pathd.yang.o CC pathd/path_cli.o CC pathd/path_ted.o CCLD zebra/zebra_irdp.la CCLD zebra/zebra_fpm.la CCLD zebra/zebra_cumulus_mlag.la CCLD zebra/dplane_fpm_nl.la CC pathd/pathd_pcep_la-path_pcep_cli.lo CC pceplib/libpcep_pcc_la-pcep_msg_messages.lo CC pceplib/libpcep_pcc_la-pcep_msg_objects.lo CC pceplib/libpcep_pcc_la-pcep_msg_tlvs.lo CC pceplib/libpcep_pcc_la-pcep_msg_tools.lo CC pceplib/libpcep_pcc_la-pcep_msg_messages_encoding.lo CC pceplib/libpcep_pcc_la-pcep_msg_objects_encoding.lo CC pceplib/libpcep_pcc_la-pcep_msg_tlvs_encoding.lo CC pceplib/libpcep_pcc_la-pcep_msg_object_error_types.lo CC pceplib/libpcep_pcc_la-pcep_pcc_api.lo CC pceplib/libpcep_pcc_la-pcep_session_logic.lo CC pceplib/libpcep_pcc_la-pcep_session_logic_loop.lo CC pceplib/libpcep_pcc_la-pcep_session_logic_states.lo CC pceplib/libpcep_pcc_la-pcep_session_logic_counters.lo CC pceplib/libpcep_pcc_la-pcep_socket_comm_loop.lo CC pceplib/libpcep_pcc_la-pcep_socket_comm.lo CC pceplib/libpcep_pcc_la-pcep_timers_event_loop.lo CC pceplib/libpcep_pcc_la-pcep_timers.lo CC pceplib/libpcep_pcc_la-pcep_utils_counters.lo CC pceplib/libpcep_pcc_la-pcep_utils_double_linked_list.lo CC pceplib/libpcep_pcc_la-pcep_utils_logging.lo CC pceplib/libpcep_pcc_la-pcep_utils_memory.lo CC pceplib/libpcep_pcc_la-pcep_utils_ordered_list.lo CC pceplib/libpcep_pcc_la-pcep_utils_queue.lo CC tools/permutations.o CC tools/gen_northbound_callbacks.o CC tools/gen_yang_deviations.o CC bgpd/rfp-example/rfptest/rfptest-rfptest.o CCLD tools/ssd CC lib/command_lex.lo CC lib/command_parse.lo AR bgpd/libbgp.a AR bgpd/rfp-example/librfp/librfp.a AR ospfd/libfrrospf.a AR ospf6d/libospf6.a AR isisd/libisis.a AR ldpd/libldp.a AR pbrd/libpbr.a AR staticd/libstatic.a AR bfdd/libbfd.a AR pathd/libpath.a XRELFO zebra/zebra_irdp.la.xref XRELFO zebra/zebra_fpm.la.xref --Return-- > /home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py(118)get_string()->None -> pdb.set_trace() (Pdb) --Return-- > /home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py(118)get_string()->None -> pdb.set_trace() (Pdb) while processing zebra/zebra_irdp.la: while processing zebra/zebra_fpm.la: Traceback (most recent call last): Traceback (most recent call last): File "./python/xrelfo.py", line 481, in _main xrelfo.load_file(fn) File "./python/xrelfo.py", line 481, in _main xrelfo.load_file(fn) File "./python/xrelfo.py", line 376, in load_file self.load_elf(filename, orig_filename) File "./python/xrelfo.py", line 376, in load_file self.load_elf(filename, orig_filename) File "./python/xrelfo.py", line 418, in load_elf if ptr.xref is None: ^^^^^^^^ File "./python/xrelfo.py", line 418, in load_elf if ptr.xref is None: ^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py", line 377, in __getattr__ self._fdata[attrname] = self._fdata[attrname]() ^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py", line 377, in __getattr__ self._fdata[attrname] = self._fdata[attrname]() ^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py", line 253, in __call__ return self.cls(self.ptr) ^^^^^^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py", line 253, in __call__ return self.cls(self.ptr) ^^^^^^^^^^^^^^^^^^ File "./python/xrelfo.py", line 83, in __init__ super().__init__(*args, **kwargs) File "./python/xrelfo.py", line 86, in __init__ if self.xrefdata: ^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py", line 361, in __init__ self._fdata[name] = item.get_string() ^^^^^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py", line 377, in __getattr__ self._fdata[attrname] = self._fdata[attrname]() ^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/host/lib/python3.11/bdb.py", line 94, in trace_dispatch return self.dispatch_return(frame, arg) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py", line 253, in __call__ return self.cls(self.ptr) ^^^^^^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/host/lib/python3.11/bdb.py", line 156, in dispatch_return if self.quitting: raise BdbQuit ^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/python/clippy/elf.py", line 361, in __init__ self._fdata[name] = item.get_string() ^^^^^^^^^^^^^^^^^ File "/home/buildroot/autobuild/instance-0/output-1/host/lib/python3.11/bdb.py", line 94, in trace_dispatch return self.dispatch_return(frame, arg) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ bdb.BdbQuit File "/home/buildroot/autobuild/instance-0/output-1/host/lib/python3.11/bdb.py", line 156, in dispatch_return if self.quitting: raise BdbQuit ^^^^^^^^^^^^^ bdb.BdbQuit make[2]: *** [Makefile:17547: zebra/zebra_irdp.la.xref] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: *** [Makefile:17547: zebra/zebra_fpm.la.xref] Error 1 make[2]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4' make[1]: *** [Makefile:6251: all] Error 2 make[1]: Leaving directory '/home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4' make: *** [package/pkg-generic.mk:283: /home/buildroot/autobuild/instance-0/output-1/build/frr-8.5.4/.stamp_built] Error 2 make: Leaving directory '/home/buildroot/autobuild/instance-0/buildroot'