>>> nut 2.8.2 Downloading wget -nd -t 3 -O '/home/autobuild/autobuild/instance-18/output-1/build/.nut-2.8.2.tar.gz.MWRlc2/output' 'https://github.com/networkupstools/nut/releases/download/v2.8.2/nut-2.8.2.tar.gz' --2024-08-01 12:05:56-- https://github.com/networkupstools/nut/releases/download/v2.8.2/nut-2.8.2.tar.gz Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt' Resolving github.com (github.com)... 140.82.112.4 Connecting to github.com (github.com)|140.82.112.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://objects.githubusercontent.com/github-production-release-asset-2e65be/8129257/b1df01e8-2b7c-41cb-b8d0-c28fdeab6125?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=releaseassetproduction%2F20240801%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240801T180557Z&X-Amz-Expires=300&X-Amz-Signature=693658f4e60513563ac13b8a819bbc6bf588035f9b0bd1950e50ce92b44b08ef&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=8129257&response-content-disposition=attachment%3B%20filename%3Dnut-2.8.2.tar.gz&response-content-type=application%2Foctet-stream [following] --2024-08-01 12:05:57-- https://objects.githubusercontent.com/github-production-release-asset-2e65be/8129257/b1df01e8-2b7c-41cb-b8d0-c28fdeab6125?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=releaseassetproduction%2F20240801%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240801T180557Z&X-Amz-Expires=300&X-Amz-Signature=693658f4e60513563ac13b8a819bbc6bf588035f9b0bd1950e50ce92b44b08ef&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=8129257&response-content-disposition=attachment%3B%20filename%3Dnut-2.8.2.tar.gz&response-content-type=application%2Foctet-stream Resolving objects.githubusercontent.com (objects.githubusercontent.com)... 185.199.110.133, 185.199.111.133, 185.199.108.133, ... Connecting to objects.githubusercontent.com (objects.githubusercontent.com)|185.199.110.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 5599935 (5.3M) [application/octet-stream] Saving to: '/home/autobuild/autobuild/instance-18/output-1/build/.nut-2.8.2.tar.gz.MWRlc2/output' 0K .......... .......... .......... .......... .......... 0% 4.62M 1s 50K .......... .......... .......... .......... .......... 1% 5.18M 1s 100K .......... .......... .......... .......... .......... 2% 24.4M 1s 150K .......... .......... .......... .......... .......... 3% 26.3M 1s 200K .......... .......... .......... .......... .......... 4% 6.98M 1s 250K .......... .......... .......... .......... .......... 5% 70.7M 1s 300K .......... .......... .......... .......... .......... 6% 64.9M 0s 350K .......... .......... .......... .......... .......... 7% 31.5M 0s 400K .......... .......... .......... .......... .......... 8% 42.1M 0s 450K .......... .......... .......... .......... .......... 9% 9.84M 0s 500K .......... .......... .......... .......... .......... 10% 61.6M 0s 550K .......... .......... .......... .......... .......... 10% 38.4M 0s 600K .......... .......... .......... .......... .......... 11% 153M 0s 650K .......... .......... .......... .......... .......... 12% 62.7M 0s 700K .......... .......... .......... .......... .......... 13% 170M 0s 750K .......... .......... .......... .......... .......... 14% 65.6M 0s 800K .......... .......... .......... .......... .......... 15% 72.0M 0s 850K .......... .......... .......... .......... .......... 16% 107M 0s 900K .......... .......... .......... .......... .......... 17% 66.1M 0s 950K .......... .......... .......... .......... .......... 18% 150M 0s 1000K .......... .......... .......... .......... .......... 19% 13.2M 0s 1050K .......... .......... .......... .......... .......... 20% 93.5M 0s 1100K .......... .......... .......... .......... .......... 21% 33.6M 0s 1150K .......... .......... .......... .......... .......... 21% 89.5M 0s 1200K .......... .......... .......... .......... .......... 22% 1.65M 0s 1250K .......... .......... .......... .......... .......... 23% 42.4M 0s 1300K .......... .......... .......... .......... .......... 24% 69.7M 0s 1350K .......... .......... .......... .......... .......... 25% 29.4M 0s 1400K .......... .......... .......... .......... .......... 26% 90.4M 0s 1450K .......... .......... .......... .......... .......... 27% 31.6M 0s 1500K .......... .......... .......... .......... .......... 28% 54.4M 0s 1550K .......... .......... .......... .......... .......... 29% 32.3M 0s 1600K .......... .......... .......... .......... .......... 30% 41.8M 0s 1650K .......... .......... .......... .......... .......... 31% 38.2M 0s 1700K .......... .......... .......... .......... .......... 32% 40.7M 0s 1750K .......... .......... .......... .......... .......... 32% 98.5M 0s 1800K .......... .......... .......... .......... .......... 33% 34.0M 0s 1850K .......... .......... .......... .......... .......... 34% 45.3M 0s 1900K .......... .......... .......... .......... .......... 35% 49.7M 0s 1950K .......... .......... .......... .......... .......... 36% 27.1M 0s 2000K .......... .......... .......... .......... .......... 37% 126M 0s 2050K .......... .......... .......... .......... .......... 38% 27.2M 0s 2100K .......... .......... .......... .......... .......... 39% 57.1M 0s 2150K .......... .......... .......... .......... .......... 40% 53.6M 0s 2200K .......... .......... .......... .......... .......... 41% 55.2M 0s 2250K .......... .......... .......... .......... .......... 42% 36.0M 0s 2300K .......... .......... .......... .......... .......... 42% 41.7M 0s 2350K .......... .......... .......... .......... .......... 43% 29.2M 0s 2400K .......... .......... .......... .......... .......... 44% 55.8M 0s 2450K .......... .......... .......... .......... .......... 45% 68.0M 0s 2500K .......... .......... .......... .......... .......... 46% 36.3M 0s 2550K .......... .......... .......... .......... .......... 47% 32.6M 0s 2600K .......... .......... .......... .......... .......... 48% 63.4M 0s 2650K .......... .......... .......... .......... .......... 49% 35.8M 0s 2700K .......... .......... .......... .......... .......... 50% 62.9M 0s 2750K .......... .......... .......... .......... .......... 51% 34.2M 0s 2800K .......... .......... .......... .......... .......... 52% 35.3M 0s 2850K .......... .......... .......... .......... .......... 53% 54.2M 0s 2900K .......... .......... .......... .......... .......... 53% 37.0M 0s 2950K .......... .......... .......... .......... .......... 54% 73.8M 0s 3000K .......... .......... .......... .......... .......... 55% 33.0M 0s 3050K .......... .......... .......... .......... .......... 56% 49.4M 0s 3100K .......... .......... .......... .......... .......... 57% 42.5M 0s 3150K .......... .......... .......... .......... .......... 58% 29.5M 0s 3200K .......... .......... .......... .......... .......... 59% 79.3M 0s 3250K .......... .......... .......... .......... .......... 60% 1.36M 0s 3300K .......... .......... .......... .......... .......... 61% 55.3M 0s 3350K .......... .......... .......... .......... .......... 62% 53.2M 0s 3400K .......... .......... .......... .......... .......... 63% 57.3M 0s 3450K .......... .......... .......... .......... .......... 64% 33.4M 0s 3500K .......... .......... .......... .......... .......... 64% 38.8M 0s 3550K .......... .......... .......... .......... .......... 65% 38.2M 0s 3600K .......... .......... .......... .......... .......... 66% 48.0M 0s 3650K .......... .......... .......... .......... .......... 67% 44.4M 0s 3700K .......... .......... .......... .......... .......... 68% 41.5M 0s 3750K .......... .......... .......... .......... .......... 69% 45.2M 0s 3800K .......... .......... .......... .......... .......... 70% 51.6M 0s 3850K .......... .......... .......... .......... .......... 71% 65.2M 0s 3900K .......... .......... .......... .......... .......... 72% 34.9M 0s 3950K .......... .......... .......... .......... .......... 73% 34.5M 0s 4000K .......... .......... .......... .......... .......... 74% 41.9M 0s 4050K .......... .......... .......... .......... .......... 74% 45.6M 0s 4100K .......... .......... .......... .......... .......... 75% 66.2M 0s 4150K .......... .......... .......... .......... .......... 76% 37.2M 0s 4200K .......... .......... .......... .......... .......... 77% 42.3M 0s 4250K .......... .......... .......... .......... .......... 78% 49.5M 0s 4300K .......... .......... .......... .......... .......... 79% 39.8M 0s 4350K .......... .......... .......... .......... .......... 80% 32.6M 0s 4400K .......... .......... .......... .......... .......... 81% 59.1M 0s 4450K .......... .......... .......... .......... .......... 82% 43.0M 0s 4500K .......... .......... .......... .......... .......... 83% 47.0M 0s 4550K .......... .......... .......... .......... .......... 84% 40.5M 0s 4600K .......... .......... .......... .......... .......... 85% 100M 0s 4650K .......... .......... .......... .......... .......... 85% 37.1M 0s 4700K .......... .......... .......... .......... .......... 86% 38.2M 0s 4750K .......... .......... .......... .......... .......... 87% 28.8M 0s 4800K .......... .......... .......... .......... .......... 88% 67.3M 0s 4850K .......... .......... .......... .......... .......... 89% 64.5M 0s 4900K .......... .......... .......... .......... .......... 90% 42.7M 0s 4950K .......... .......... .......... .......... .......... 91% 49.8M 0s 5000K .......... .......... .......... .......... .......... 92% 48.0M 0s 5050K .......... .......... .......... .......... .......... 93% 58.3M 0s 5100K .......... .......... .......... .......... .......... 94% 37.1M 0s 5150K .......... .......... .......... .......... .......... 95% 62.1M 0s 5200K .......... .......... .......... .......... .......... 96% 46.8M 0s 5250K .......... .......... .......... .......... .......... 96% 63.0M 0s 5300K .......... .......... .......... .......... .......... 97% 84.0M 0s 5350K .......... .......... .......... .......... .......... 98% 52.2M 0s 5400K .......... .......... .......... .......... .......... 99% 44.7M 0s 5450K .......... ........ 100% 180M=0.2s 2024-08-01 12:05:57 (25.5 MB/s) - '/home/autobuild/autobuild/instance-18/output-1/build/.nut-2.8.2.tar.gz.MWRlc2/output' saved [5599935/5599935] nut-2.8.2.tar.gz: OK (sha256: e4b4b0cbe7dd39ba9097be7f7d787bb2fffbe35df64dff53b5fe393d659c597d) >>> nut 2.8.2 Extracting gzip -d -c /home/autobuild/autobuild/instance-18/dl/nut/nut-2.8.2.tar.gz | tar --strip-components=1 -C /home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2 -xf - >>> nut 2.8.2 Patching >>> nut 2.8.2 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2 -name $file); do cp support/gnuconfig/$file $i; done; done >>> nut 2.8.2 Patching libtool patching file /home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/ltmain.sh Hunk #1 succeeded at 2786 (offset 99 lines). Hunk #2 succeeded at 4376 (offset 99 lines). Hunk #3 succeeded at 6671 (offset 117 lines). Hunk #4 succeeded at 6681 (offset 117 lines). Hunk #5 succeeded at 6974 (offset 117 lines). Hunk #6 succeeded at 7266 (offset 117 lines). Hunk #7 succeeded at 8241 (offset 129 lines). Hunk #8 succeeded at 10873 (offset 163 lines). >>> nut 2.8.2 Configuring (cd /home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/ && rm -rf config.cache && GIT_DIR=. PATH="/home/autobuild/autobuild/instance-18/output-1/host/bin:/home/autobuild/autobuild/instance-18/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" AR="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ar" AS="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-as" LD="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld" NM="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-nm" CC="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc" GCC="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc" CPP="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-cpp" CXX="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++" FC="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gfortran" F77="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gfortran" RANLIB="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ranlib" READELF="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-readelf" STRIP="/bin/true" OBJCOPY="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-objcopy" OBJDUMP="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/home/autobuild/autobuild/instance-18/output-1/host/bin/ccache /usr/bin/gcc" GCC_FOR_BUILD="/home/autobuild/autobuild/instance-18/output-1/host/bin/ccache /usr/bin/gcc" CXX_FOR_BUILD="/home/autobuild/autobuild/instance-18/output-1/host/bin/ccache /usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/autobuild/autobuild/instance-18/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-18/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-18/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/autobuild/autobuild/instance-18/output-1/host/lib -Wl,-rpath,/home/autobuild/autobuild/instance-18/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-as" DEFAULT_LINKER="/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -O0 -g0 -static" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -O0 -g0 -static -static" LDFLAGS=" -static" FCFLAGS="-mlongcalls -mauto-litpools -O0 -g0 -static" FFLAGS="-mlongcalls -mauto-litpools -O0 -g0 -static" PKG_CONFIG="/home/autobuild/autobuild/instance-18/output-1/host/bin/pkg-config" STAGING_DIR="/home/autobuild/autobuild/instance-18/output-1/host/xtensa-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes ax_cv_check_cflags__Werror__Wno_unknown_warning_option=no ax_cv_check_cxxflags__Werror__Wno_unknown_warning_option=no ac_cv_func_strcasecmp=yes ac_cv_func_strdup=yes ac_cv_func_strncasecmp=yes ax_cv__printf_string_null=yes CONFIG_SITE=/dev/null ./configure --target=xtensa-buildroot-linux-uclibc --host=xtensa-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --disable-shared --with-altpidpath=/var/run/upsd --with-dev --without-doc --without-python --without-python2 --with-user=nut --with-group=nut --with-drivers=auto --without-avahi --without-freeipmi --without-cgi --without-libltdl --with-usb --with-neon --without-snmp --with-ssl --without-pynut --without-python3 ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking for CONFIG_FLAGS... --target=xtensa-buildroot-linux-uclibc --host=xtensa-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix= --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --disable-shared --with-altpidpath=/var/run/upsd --with-dev --without-doc --without-python --without-python2 --with-user=nut --with-group=nut --with-drivers=auto --without-avahi --without-freeipmi --without-cgi --without-libltdl --with-usb --with-neon --without-snmp --with-ssl --without-pynut --without-python3 Network UPS Tools version 2.8.2 checking build system type... x86_64-pc-linux-gnu checking host system type... xtensa-buildroot-linux-uclibc checking target system type... xtensa-buildroot-linux-uclibc checking for host system name... checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for xtensa-buildroot-linux-uclibc-strip... /bin/true checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for autoconf macro to enable system extensions... yes checking whether make supports the include directive... yes (GNU style) checking for xtensa-buildroot-linux-uclibc-gcc... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc accepts -g... yes checking for /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc option to accept ISO C89... none needed checking whether /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc understands -c and -o together... yes checking dependency style of /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc... none checking how to run the C preprocessor... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-cpp checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking how to run the C preprocessor... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-cpp checking whether we are using the GNU C++ compiler... yes checking whether /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ accepts -g... yes checking dependency style of /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++... none checking whether /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ understands -c and -o together... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether this make implementation supports export VAR=VAL syntax... no: got 'make[1]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2' VAR=VAL make[1]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2'' checking pkg-config is at least version 0.9.0... yes checking whether usable PKG_CONFIG was already detected by autoconf... yes: /home/autobuild/autobuild/instance-18/output-1/host/bin/pkg-config configure: checking for autoconf macro support of pkg-config (/home/autobuild/autobuild/instance-18/output-1/host/bin/pkg-config) configure: checking for autoconf macro support of pkg-config module checker checking for pkg-config... yes checking for realpath... realpath checking whether ln -s works... yes checking for egrep... (cached) /usr/bin/grep -E checking for ar... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ar checking for xtensa-buildroot-linux-uclibc-ranlib... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ranlib checking whether byte ordering is bigendian... (cached) yes checking for inline... inline checking for flexible array members... yes checking for variable-length arrays... yes checking if CC compiler family is GCC... yes checking if CXX compiler family is GCC... yes checking if CPP preprocessor family is GCC... yes checking if CC compiler family is clang... no checking if CXX compiler family is clang... no checking if CPP preprocessor family is clang... no checking Compact version of C compiler... "xtensa-buildroot-linux-uclibc-gcc.br_real (Buildroot 2024.05-971-ge321e81cf9) 13.3.0" checking Compact version of C++ compiler... "xtensa-buildroot-linux-uclibc-g++.br_real (Buildroot 2024.05-971-ge321e81cf9) 13.3.0" checking Compact version of C preprocessor... "xtensa-buildroot-linux-uclibc-cpp.br_real (Buildroot 2024.05-971-ge321e81cf9) 13.3.0" configure: Detecting support for additional compiler flags checking whether C compiler accepts -Qunused-arguments... no checking whether C++ compiler accepts -Qunused-arguments... no checking whether C compiler accepts -Wno-reserved-identifier... yes configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them checking whether C++ compiler accepts -Wno-reserved-identifier... yes configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them configure: NOT checking for options to request colorized compiler output (pass --enable-Wcolor for that) checking whether C compiler accepts -Wno-unknown-warning-option... (cached) no checking whether C++ compiler accepts -Wno-unknown-warning-option... (cached) no checking whether C compiler accepts -std=gnu99... yes configure: Defaulting C standard support to GNU C99 on a GCC or CLANG compatible compiler checking whether C++ compiler accepts -std=gnu++11... yes configure: Defaulting C++ standard support to GNU C++11 on a GCC or CLANG compatible compiler checking for pragma GCC diagnostic push and pop (outside functions)... yes checking for pragma clang diagnostic push and pop (outside functions)... no checking for pragma GCC diagnostic push and pop (inside functions)... yes checking for pragma clang diagnostic push and pop (inside functions)... no checking for pragma GCC diagnostic ignored "-Wunused-function"... yes checking for pragma GCC diagnostic ignored "-Wdeprecated-declarations"... yes checking for pragma GCC diagnostic ignored "-Wformat-nonliteral"... yes checking for pragma GCC diagnostic ignored "-Wformat-nonliteral" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wformat-security"... yes checking for pragma GCC diagnostic ignored "-Wformat-security" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wformat-truncation"... yes checking for pragma GCC diagnostic ignored "-Wformat-truncation" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wstringop-truncation"... yes checking for pragma GCC diagnostic ignored "-Wstringop-truncation" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wtype-limits"... yes checking for pragma GCC diagnostic ignored "-Wtype-limits" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Warray-bounds"... yes checking for pragma GCC diagnostic ignored "-Warray-bounds" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wtautological-type-limit-compare"... no checking for pragma GCC diagnostic ignored "-Wtautological-type-limit-compare" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wtautological-constant-out-of-range-compare"... no checking for pragma GCC diagnostic ignored "-Wtautological-constant-out-of-range-compare" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wtautological-unsigned-zero-compare"... no checking for pragma GCC diagnostic ignored "-Wtautological-unsigned-zero-compare" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wtautological-compare"... yes checking for pragma GCC diagnostic ignored "-Wtautological-compare" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wsign-compare"... yes checking for pragma GCC diagnostic ignored "-Wsign-compare" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wsign-conversion"... yes checking for pragma GCC diagnostic ignored "-Wsign-conversion" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wunreachable-code-break"... no checking for pragma GCC diagnostic ignored "-Wunreachable-code-break" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wunreachable-code-return"... no checking for pragma GCC diagnostic ignored "-Wunreachable-code-return" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wunreachable-code"... yes checking for pragma GCC diagnostic ignored "-Wunreachable-code" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wformat-overflow"... yes checking for pragma GCC diagnostic ignored "-Wformat-overflow" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wcovered-switch-default"... no checking for pragma GCC diagnostic ignored "-Wcovered-switch-default" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wextra-semi-stmt"... no checking for pragma GCC diagnostic ignored "-Wextra-semi-stmt" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wcast-align"... yes checking for pragma GCC diagnostic ignored "-Wcast-align" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wcast-function-type-strict"... no checking for pragma GCC diagnostic ignored "-Wcast-function-type-strict" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wstrict-prototypes"... yes checking for pragma GCC diagnostic ignored "-Wstrict-prototypes" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wassign-enum"... no checking for pragma GCC diagnostic ignored "-Wassign-enum" (outside functions)... no checking for C++ pragma GCC diagnostic ignored "-Wc++98-compat-pedantic"... no checking for C++ pragma GCC diagnostic ignored "-Wc++98-compat-pedantic" (outside functions)... no checking for C++ pragma GCC diagnostic ignored "-Wc++98-compat"... no checking for C++ pragma GCC diagnostic ignored "-Wc++98-compat" (outside functions)... no checking for C++ pragma GCC diagnostic ignored "-Wglobal-constructors"... no checking for C++ pragma GCC diagnostic ignored "-Wglobal-constructors" (outside functions)... no checking for C++ pragma GCC diagnostic ignored "-Wexit-time-destructors"... no checking for C++ pragma GCC diagnostic ignored "-Wexit-time-destructors" (outside functions)... no checking for pragma BOGUSforTest... no checking for pragma BOGUSforTest (outside functions)... no checking for pragma GCC diagnostic ignored "-WBOGUSforTest"... no checking for pragma GCC diagnostic ignored "-WBOGUSforTest" (outside functions)... no checking for __attribute__((unused)) for function arguments... yes checking for __attribute__((unused)) for functions... yes checking for __attribute__((noreturn))... yes checking for at least some __attribute__ support... yes checking for practical support to printf("%s", NULL)... (cached) yes checking for sys/time.h... yes checking for time.h... yes checking for sys/types.h... (cached) yes checking for sys/socket.h... yes checking for netdb.h... yes checking for flock... yes checking for lockf... yes checking for fcvt... no checking for fcvtl... no checking for dup... yes checking for dup2... yes checking for abs_val... no checking for abs... yes checking float.h usability... yes checking float.h presence... yes checking for float.h... yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking whether fabs is declared... yes checking whether fabsf is declared... yes checking whether fabsl is declared... yes checking whether pow10 is declared... yes checking whether round is declared... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for stdlib.h... (cached) yes checking whether realpath is declared... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking sys/signal.h usability... yes checking sys/signal.h presence... yes checking for sys/signal.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking for struct rlimit and getrlimit()... ok checking poll.h usability... yes checking poll.h presence... yes checking for poll.h... yes checking semaphore.h usability... yes checking semaphore.h presence... yes checking for semaphore.h... yes checking for sem_t, sem_init() and sem_destroy()... ok checking for sem_init in -lrt... yes checking for cfsetispeed... yes checking for tcsendbreak... yes checking for seteuid... yes checking for setsid... yes checking for getpassphrase... no checking for on_exit... yes checking for setlogmask... yes checking whether LOG_UPTO is declared... yes configure: ----------------------------------------------------------------------- The next few tests look for required C library routines; if something is not found, you may need to enable a different C standard or extension macro version. You may also have to configure without extreme warning levels since autotools tests fail those on their own and assume system lacks stuff (although note we try to not involve standard -W* flags here). ----------------------------------------------------------------------- checking for strtok_r... yes checking for fileno... yes checking for sigemptyset... yes checking for sigaction... yes checking for localtime_r... yes checking for localtime_s... no checking for gmtime_r... yes checking for gmtime_s... no checking for timegm... yes checking for _mkgmtime... no checking for at least one gmtime implementation... yes checking for at least one localtime implementation... yes checking for at least one timegm implementation... yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for strcasecmp(s1,s2)... (cached) yes checking for strncasecmp(s1,s2,n)... (cached) yes checking for strlwr(s)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them no configure: WARNING: Optional C library routine strlwr not found checking for strsep(s1,s2)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for strstr(s1,s2)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for strcasestr(s1,s2)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for strptime(s1,s2,tm)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for clock_gettime(CLOCK_MONOTONIC,ts)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for strnlen(s1,s2,tm)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them no configure: WARNING: Optional C library routine strnlen not found; a fallback implementation will be built in checking for strdup(s)... (cached) yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for suseconds_t... yes checking for useconds_t... yes checking for usleep(us)... yes checking whether ln -sr works... yes checking for unsigned long long int... yes checking for vsnprintf... yes checking for snprintf... yes checking for setenv... yes checking for strerror... yes checking for atexit... yes checking whether optind is declared... yes checking for getopt.h... yes checking for getopt_long... yes checking whether uu_lock is declared... no checking whether __func__ is declared... yes checking for library containing gethostbyname... none required checking for library containing connect... none required checking for sys/modem.h... no checking for stdarg.h... yes checking for varargs.h... no checking for library containing pthread_create... none required checking for library containing pthread_tryjoin_np... none required checking for windows.h... no checking for winsock2.h... no checking for ws2tcpip.h... no checking for socklen_t... yes checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for netdb.h... (cached) yes checking types of arguments for getnameinfo... const struct sockaddr *,socklen_t,socklen_t,unsigned int checking for inet_ntop() with IPv4 and IPv6 support... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for inet_pton() with IPv4 and IPv6 support... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for struct pollfd... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes configure: WARNING: A python program name without a specific version number was requested (may be a symlink prone to change over time): no checking python interpeter to call... no checking python2 interpeter to call... no checking python3 interpeter to call... no checking which python version to use by default... none checking which drivers to build... all checking for --with-all... not given checking for libregex version via pkg-config... none found checking regex.h usability... yes checking regex.h presence... yes checking for regex.h... yes checking whether regexec is declared... yes checking whether regcomp is declared... yes checking for library containing regcomp, regexec... no checking for library containing regcomp, regexec... no checking for libusb-1.0 version via pkg-config... 1.0.27 found checking for libusb(-0.1) version via pkg-config... 0.1.12 found checking for libusb-config... no checking for libusb preferred version... 1.0.27 (libusb-1.0) checking for libusb cflags... -I/home/autobuild/autobuild/instance-18/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/usr/include/libusb-1.0 checking for libusb ldflags... -L/home/autobuild/autobuild/instance-18/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/usr/lib -lusb-1.0 -latomic checking for libusb.h... yes checking for libusb_init... yes checking for libusb_strerror... yes checking for libusb_kernel_driver_active... yes checking for libusb_set_auto_detach_kernel_driver... yes checking for libusb_detach_kernel_driver... yes checking for libusb_detach_kernel_driver_np... no checking for usb_detach_kernel_driver_np... no checking for libusb_get_port_number... yes checking size of void *... 4 checking for net-snmp-config-32... no checking for net-snmp-config... no checking for Net-SNMP version via pkg-config... none found checking for Net-SNMP cflags... checking for Net-SNMP libs... checking for net-snmp/net-snmp-config.h... no checking for init_snmp... no checking for libneon version via pkg-config (0.25.0 minimum required)... 0.33.0 found checking for libneon cflags... -I/home/autobuild/autobuild/instance-18/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/usr/include/neon checking for libneon ldflags... -L/home/autobuild/autobuild/instance-18/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/usr/lib -lneon -L/home/autobuild/autobuild/instance-18/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/usr/lib -lxml2 -L/home/autobuild/autobuild/instance-18/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/home/autobuild/autobuild/instance-18/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib -lz -liconv -lm -llzma -pthread -lpthread checking for ne_xmlreq.h... yes checking for ne_xml_dispatch_request... yes checking for ne_set_connect_timeout... yes checking for ne_sock_connect_timeout... yes checking for LLNC libpowerman version via pkg-config... 'none' found checking for libpowerman cflags... checking for libpowerman libs... checking for libpowerman.h... no checking for pm_connect... no checking for libmodbus version via pkg-config... none found checking for libmodbus cflags... -I/usr/include/modbus checking for libmodbus ldflags... -lmodbus checking for modbus.h... no checking for modbus_new_rtu... no checking for modbus_new_tcp... no checking for modbus_set_byte_timeout... no checking for modbus_set_response_timeout... no checking for modbus_new_rtu_usb... no checking for libgpiod version via pkg-config (1.0.0 minimum required)... none found checking for libgpiod cflags... -I/usr/include -I/usr/local/include checking for libgpiod ldflags... -lgpiod checking for gpiod.h... no checking for gpiod_chip_open_by_name... no checking for gpiod_chip_close... no checking for avahi-core version via pkg-config (0.6.30 minimum required)... none found checking for avahi-client version via pkg-config (0.6.30 minimum required)... none found checking for avahi cflags... -I/usr/local/include -I/usr/include -L/usr/local/lib -L/usr/lib checking for avahi ldflags... -lavahi-core -lavahi-client checking for avahi-common/malloc.h... no checking for avahi_free... no checking for msgfmt... /home/autobuild/autobuild/instance-18/output-1/host/bin/msgfmt checking for sys/termios.h... yes checking for struct termios and speed_t... ok checking whether we can build serial drivers... yes checking whether to build serial drivers... yes checking whether to build USB drivers... yes (libusb-1.0) checking whether to build neon based XML driver... yes checking whether to enable Avahi support... no checking whether to build Powerman PDU client driver... no checking whether to build Modbus driver... no checking for FreeIPMI version via pkg-config... none found checking for FreeIPMI cflags... checking for FreeIPMI ldflags... -lfreeipmi -lipmimonitoring checking for freeipmi/freeipmi.h... no checking for ipmi_monitoring.h... no checking for library containing ipmi_ctx_create... no checking for library containing ipmi_ctx_find_inband... no checking for library containing ipmi_monitoring_init... no checking for library containing ipmi_monitoring_sensor_read_record_id... no checking for library containing ipmi_sdr_cache_ctx_destroy... no checking for library containing ipmi_sdr_ctx_destroy... no checking whether to build IPMI driver... no checking whether to build GPIO driver... no checking whether to build Mac OS X meta-driver... no checking linux/i2c-dev.h usability... yes checking linux/i2c-dev.h presence... yes checking for linux/i2c-dev.h... yes checking i2c/smbus.h usability... no checking i2c/smbus.h presence... no checking for i2c/smbus.h... no checking whether i2c_smbus_access is declared... no checking whether i2c_smbus_read_byte_data is declared... no checking whether i2c_smbus_write_byte_data is declared... no checking whether i2c_smbus_read_word_data is declared... no checking whether i2c_smbus_write_word_data is declared... no checking whether i2c_smbus_read_block_data is declared... no checking for library containing i2c_smbus_read_byte, i2c_smbus_access, i2c_smbus_read_byte_data, i2c_smbus_write_byte_datai2c_smbus_write_byte_data, i2c_smbus_read_word_data, i2c_smbus_write_word_data, i2c_smbus_read_block_data... no checking whether to build i2c based drivers... no checking for OpenSSL version via pkg-config... 3.3.1 found checking for OpenSSL cflags... checking for OpenSSL ldflags... -L/home/autobuild/autobuild/instance-18/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/usr/lib -lssl -L/home/autobuild/autobuild/instance-18/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/usr/lib -lz -pthread -latomic -lcrypto -lz -pthread -latomic checking for openssl/ssl.h... yes checking for SSL_CTX_new... yes checking whether to enable SSL support... yes (OpenSSL) checking for tcpd.h... no checking for library containing yp_get_default_domain... no checking for library containing request_init... no checking whether to enable libwrap (tcp-wrappers) support... no checking whether to enable libltdl (Libtool dlopen abstraction) support... no checking whether to build nut-scanner... no checking whether to build CGI programs... no checking if we can and should install NUT-Monitor desktop application... no: No python 2/3 interpreter was found checking if we can and should install PyNUT module... no checking whether to install NUT-Monitor desktop application... no checking whether to install PyNUT binding module... no checking for cppcheck... no checking if cppcheck version is okay (minimum required 1.0)... no checking whether to run cppcheck among default make check target... no checking whether to run NIT among default make check target... no checking for aspell... no checking if aspell version can do our documentation spell checks (minimum required 0.60.6)... no checking if we have all the tools mandatory for documentation spell checks... no checking whether to run spellcheck among default make check target... no checking for asciidoc... /usr/bin/asciidoc checking for asciiDoc version... 10.2.1 found checking for a2x... /usr/bin/a2x checking for a2x version... 10.2.1 found checking for dblatex... /usr/bin/dblatex checking for dblatex version... found checking for xsltproc... /usr/bin/xsltproc checking for xsltproc version... 21301 found checking for xmllint... /usr/bin/xmllint checking for xmllint version... 21303-GITv2.13.3 found checking for source-highlight... /usr/bin/source-highlight checking if asciidoc version can build manpages (minimum required 8.1.0)... yes checking if a2x version can build manpages (minimum required 1.0.0)... yes checking if xsltproc is present (mandatory for man page regeneration)... yes checking if xmllint is present (mandatory for man page regeneration)... yes checking if we have all the tools mandatory for man page regeneration... yes checking if source-highlight is present (preferable for documentation generation)... yes checking whether to build and install documentation... no checking whether to build specific documentation format(s)... no checking for xtensa-buildroot-linux-uclibc-ar... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ar checking the archiver (/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ar) interface... ar checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld checking if the linker (/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-nm checking the name lister (/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-nm) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to xtensa-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld option to reload object files... -r checking for xtensa-buildroot-linux-uclibc-objdump... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-objdump checking how to recognize dependent libraries... pass_all checking for xtensa-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for xtensa-buildroot-linux-uclibc-ar... (cached) /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ar checking for archiver @FILE support... @ checking for xtensa-buildroot-linux-uclibc-strip... (cached) /bin/true checking for xtensa-buildroot-linux-uclibc-ranlib... (cached) /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-ranlib checking command to parse /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc-nm output from /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for xtensa-buildroot-linux-uclibc-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... no checking for objdir... .libs checking if /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no checking for /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC checking if /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes checking if /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc static flag -static works... yes checking if /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc supports -c -o file.o... yes checking if /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes checking whether the /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc linker (/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... no checking whether to build static libraries... yes checking how to run the C++ preprocessor... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ -E checking for ld used by /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++... /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld checking if the linker (/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld) is GNU ld... yes checking whether the /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ linker (/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld) supports shared libraries... yes /usr/bin/grep: warning: stray \ before - checking for /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ option to produce PIC... -fPIC -DPIC checking if /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ PIC flag -fPIC -DPIC works... yes checking if /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ static flag -static works... yes checking if /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ supports -c -o file.o... yes checking if /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ supports -c -o file.o... (cached) yes checking whether the /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ linker (/home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether to build and install the development files... yes checking for xtensa-buildroot-linux-uclibc-windmc... no checking for windmc... no checking for xtensa-buildroot-linux-uclibc-windres... no checking for windres... no checking setting for Default installation prefix path... "/usr" checking if requested state path... default checking setting for State file path... "/var/state/ups" checking if requested alt pid path... specified checking setting for Unprivileged PID file path... "/var/run/upsd" checking if requested pidpath... default checking setting for Privileged PID file path... "/run" checking if requested default upsmon POWERDOWNFLAG path... default checking if requested driver path... default checking setting for Driver program path... "/usr/bin" checking if requested cgi path... default checking setting for CGI program path... "/usr/cgi-bin" checking if requested html path... default checking setting for HTML file path... "/usr/html" checking network port number... 3493 checking facility for syslog... LOG_DAEMON checking which driver man pages to install... none (manpages disabled) checking whether to force nut_version.h generation for every make run... no checking whether to strip debug symbols... no checking whether to install pkg-config *.pc files... using ${libdir}/pkgconfig => /usr/lib/pkgconfig checking whether to make Solaris SVR4 packages... no checking whether to make Solaris IPS packages... no checking whether to install Solaris SMF files... no checking whether to install Solaris SVR4 (legacy) init-script files... no checking whether to install systemd unit files... no checking whether to consider basic systemd support... no checking whether to install systemd shutdown files... no checking whether to install systemd tmpfiles files... no checking for systemd-tmpfiles... /usr/bin/systemd-tmpfiles checking for libsystemd version via pkg-config... none found checking for libsystemd cflags... checking for libsystemd ldflags... -lsystemd checking for systemd/sd-daemon.h... no checking for sd_notify... no checking whether requested and can build binaries with tighter systemd integration support... no checking for systemd-analyze... /usr/bin/systemd-analyze checking if your systemd version supports Type=notify... yes checking if your systemd version supports Type=notify-reload... yes checking whether to build with tighter systemd support... no checking for C++11 support in current compiler... yes, out of the box checking whether to build C++11 codebase (client library, etc.)... yes checking for have_cppunit... checking for cppunit... no configure: WARNING: libcppunit not found - those C++ tests will not be built. no checking for impact from --enable-cppunit option - should we build cppunit tests?... no checking whether to build C++ tests with CPPUNIT... no checking whether we can and want to build nutconf configuration-management tool... yes checking whether to build and install the nutconf tool (experimental, may lack support for recent NUT options)... yes checking whether to install Augeas configuration-management lenses... no checking for augparse... no checking whether to enable Augeas configuration-management lenses tests... no checking whether to install hotplug rules... no checking whether to install udev rules... using /lib/udev checking whether to install FreeBSD devd.conf file... no checking whether to install FreeBSD site-local USB quirks file... no checking for valgrind... no checking whether valgrind is usable on current platform... no checking whether to use valgrind for memory-leak testing... no checking whether to build cppunit tests using valgrind support... no checking setting for Config file path... "/etc" checking setting for Data file path... "/usr/share" checking setting for Tool program path... "/usr/bin" checking setting for System program path... "/usr/sbin" checking setting for System library path... "/usr/lib" checking setting for System exec-library path... "/usr/libexec" checking whether to build SNMP drivers... no checking whether to build SNMP drivers with statically linked lib(net)snmp... no checking host env spec we run on... "xtensa-buildroot-linux-uclibc" checking host env spec we built on... "x86_64-pc-linux-gnu" checking host env spec we built for... "xtensa-buildroot-linux-uclibc" checking host OS short spec we run on... "xtensa-linux-uclibc" checking host OS short spec we built on... "x86_64-linux-gnu" checking host OS short spec we built for... "xtensa-linux-uclibc" checking whether compiler suggests a MULTIARCH value... checking if requested user to run as... specified checking setting for User to run as... "nut" checking if requested group membership of user to run as... specified checking setting for Group of user to run as... "nut" checking whether to pre-set warnings (from 'auto')... gcc-medium checking whether to make warnings fatal... no checking for string.h... (cached) yes checking whether we should disable string built-ins... no, they are not a problem checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking whether we should disable htonl/ntohl built-ins... no, they are not a problem checking for top build dir for this configure run... '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2' checking whether to customize /home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/scripts/systemd/nut-common-tmpfiles.conf.in for this system... done checking ccache namespace tag (if ccache is used and new enough)... "nut:xtensa-buildroot-linux-uclibc" configure: WARNING: CCACHE_NAMESPACE setting may have no effect: this make implementation seems to not support "export VAR=VAL" syntax configure: CONFIG_CFLAGS=' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -O0 -g0 -static' configure: CONFIG_CXXFLAGS=' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -O0 -g0 -static -static' checking whether to enable debug info in all NUT binaries... C: no; C++: no configure: Generating "data" files from templates, see below for executable scripts configure: Generating templated script files that should be marked executable configure: Generating templated script files whose templates might have been generated (or not) by autogen.sh calling our helper scripts checking whether to generate scripts/augeas/nutupsconf.aug... yes checking whether to generate scripts/udev/nut-usbups.rules... yes checking whether to generate scripts/devd/nut-usb.conf... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating clients/Makefile config.status: creating common/Makefile config.status: creating conf/Makefile config.status: creating conf/upsmon.conf.sample config.status: creating conf/upssched.conf.sample config.status: creating data/html/header.html config.status: creating data/html/Makefile config.status: creating data/Makefile config.status: creating data/driver.list config.status: creating docs/Makefile config.status: creating docs/cables/Makefile config.status: creating docs/docinfo.xml config.status: creating docs/man/Makefile config.status: creating drivers/Makefile config.status: creating include/Makefile config.status: creating lib/libupsclient.pc config.status: creating lib/libnutclient.pc config.status: creating lib/libnutclientstub.pc config.status: creating lib/libnutscan.pc config.status: creating lib/Makefile config.status: creating scripts/Aix/nut-aix.spec config.status: creating scripts/RedHat/ups config.status: creating scripts/augeas/Makefile config.status: creating scripts/augeas/nutnutconf.aug config.status: creating scripts/augeas/nutupsdconf.aug config.status: creating scripts/augeas/nutupsdusers.aug config.status: creating scripts/augeas/nutupsmonconf.aug config.status: creating scripts/augeas/nutupsschedconf.aug config.status: creating scripts/augeas/nuthostsconf.aug config.status: creating scripts/augeas/nutupssetconf.aug config.status: creating scripts/avahi/nut.service config.status: creating scripts/devd/Makefile config.status: creating scripts/hotplug/Makefile config.status: creating scripts/hotplug/libhidups config.status: creating scripts/HP-UX/nut.psf config.status: creating scripts/installer/Makefile config.status: creating scripts/python/Makefile config.status: creating scripts/python/module/Makefile config.status: creating scripts/python/module/PyNUT.py config.status: creating scripts/python/module/setup.py config.status: creating scripts/upsdrvsvcctl/Makefile config.status: creating scripts/systemd/Makefile config.status: creating scripts/systemd/nut-common-tmpfiles.conf config.status: creating scripts/systemd/nut-driver@.service config.status: creating scripts/systemd/nut-monitor.service config.status: creating scripts/systemd/nut-server.service config.status: creating scripts/systemd/nut-driver-enumerator.service config.status: creating scripts/systemd/nut-driver-enumerator.path config.status: creating scripts/systemd/nut-driver-enumerator-daemon.service config.status: creating scripts/systemd/nut-driver-enumerator-daemon-activator.service config.status: creating scripts/systemd/nut-driver-enumerator-daemon-activator.path config.status: creating scripts/Solaris/nut-driver-enumerator.xml config.status: creating scripts/Solaris/nut-driver.xml config.status: creating scripts/Solaris/nut-monitor.xml config.status: creating scripts/Solaris/nut-server.xml config.status: creating scripts/Solaris/nut.xml config.status: creating scripts/Solaris/Makefile config.status: creating scripts/Solaris/pkginfo config.status: creating scripts/udev/Makefile config.status: creating scripts/udev/nut-ipmipsu.rules config.status: creating scripts/ufw/Makefile config.status: creating scripts/ufw/nut.ufw.profile config.status: creating scripts/Windows/Makefile config.status: creating scripts/Windows/Installer/NUT-Installer.xml config.status: creating scripts/Makefile config.status: creating server/Makefile config.status: creating tools/Makefile config.status: creating tools/nut-scanner/Makefile config.status: creating tools/nutconf/Makefile config.status: creating tests/Makefile config.status: creating tests/NIT/Makefile config.status: creating Makefile config.status: creating lib/libupsclient-config config.status: creating scripts/Aix/nut.init config.status: creating scripts/HP-UX/postinstall config.status: creating scripts/RedHat/upsd config.status: creating scripts/RedHat/upsmon config.status: creating scripts/python/app/NUT-Monitor-py2gtk2 config.status: creating scripts/python/app/NUT-Monitor-py3qt5 config.status: creating scripts/augeas/gen-nutupsconf-aug.py config.status: creating scripts/python/module/test_nutclient.py config.status: creating scripts/upsdrvsvcctl/nut-driver-enumerator.sh config.status: creating scripts/upsdrvsvcctl/upsdrvsvcctl config.status: creating scripts/systemd/nutshutdown config.status: creating scripts/Solaris/svc-nut-server config.status: creating scripts/Solaris/svc-nut-monitor config.status: creating scripts/Solaris/precheck.py config.status: creating scripts/Solaris/preinstall config.status: creating scripts/Solaris/postinstall config.status: creating scripts/Solaris/preremove config.status: creating scripts/Solaris/postremove config.status: creating scripts/Solaris/preproto.pl config.status: creating scripts/Solaris/nut config.status: creating tools/gitlog2changelog.py config.status: creating tools/nut-snmpinfo.py config.status: creating scripts/augeas/nutupsconf.aug config.status: creating scripts/udev/nut-usbups.rules config.status: creating scripts/devd/nut-usb.conf config.status: creating include/config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls NUT Configuration summary: ========================== * configured version: 2.8.2 * build serial drivers: yes * build USB drivers: yes (libusb-1.0) * build neon based XML driver: yes * enable Avahi support: no * build Powerman PDU client driver: no * build Modbus driver: no * build IPMI driver: no * build GPIO driver: no * build Mac OS X meta-driver: no * build i2c based drivers: no * enable SSL support: yes (OpenSSL) * enable libwrap (tcp-wrappers) support: no * enable libltdl (Libtool dlopen abstraction) support: no * build nut-scanner: no * build CGI programs: no * install NUT-Monitor desktop application: no * install PyNUT binding module: no * build and install documentation: no * build specific documentation format(s): no * build and install the development files: yes * consider basic SMF support: no * consider basic systemd support: no * build with tighter systemd support: no * build C++11 codebase (client library, etc.): yes * build C++ tests with CPPUNIT: no * build and install the nutconf tool (experimental, may lack support for recent NUT options): yes * build SNMP drivers: no * build SNMP drivers with statically linked lib(net)snmp: no * User to run as: nut * Group of user to run as: nut NUT Paths: ---------- * Default installation prefix path: /usr * State file path: /var/state/ups * Unprivileged PID file path: /var/run/upsd * Privileged PID file path: /run * Driver program path: /usr/bin * CGI program path: /usr/cgi-bin * HTML file path: /usr/html * Config file path: /etc * Data file path: /usr/share * Tool program path: /usr/bin * System program path: /usr/sbin * System library path: /usr/lib * System exec-library path: /usr/libexec NUT Paths for third-party integrations: --------------------------------------- * pkg-config *.pc directory: ${libdir}/pkgconfig => /usr/lib/pkgconfig * Udev rules directory: /lib/udev NUT Build/Target system info: ----------------------------- * Compact version of C compiler: xtensa-buildroot-linux-uclibc-gcc.br_real (Buildroot 2024.05-971-ge321e81cf9) 13.3.0 * Compact version of C++ compiler: xtensa-buildroot-linux-uclibc-g++.br_real (Buildroot 2024.05-971-ge321e81cf9) 13.3.0 * Compact version of C preprocessor: xtensa-buildroot-linux-uclibc-cpp.br_real (Buildroot 2024.05-971-ge321e81cf9) 13.3.0 * host env spec we run on: xtensa-buildroot-linux-uclibc * host env spec we built on: x86_64-pc-linux-gnu * host env spec we built for: xtensa-buildroot-linux-uclibc * host OS short spec we run on: xtensa-linux-uclibc * host OS short spec we built on: x86_64-linux-gnu * host OS short spec we built for: xtensa-linux-uclibc * ccache namespace tag (if ccache is used and new enough): nut:xtensa-buildroot-linux-uclibc NUT Compiler settings: ---------------------- * CC : /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc * CFLAGS : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -O0 -g0 -static -Wno-reserved-identifier -std=gnu99 -Wno-system-headers -Wall -Wextra -Wsign-compare -pedantic -Wno-error * CXX : /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-g++ * CXXFLAGS : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -mlongcalls -mauto-litpools -O0 -g0 -static -static -Wno-reserved-identifier -std=gnu++11 -Wno-system-headers -Wall -Wextra -Wno-error * CPP : /home/autobuild/autobuild/instance-18/output-1/host/bin/xtensa-buildroot-linux-uclibc-cpp * CPPFLAGS : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 * CONFIG_FLAGS : --target=xtensa-buildroot-linux-uclibc --host=xtensa-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix= --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --disable-shared --with-altpidpath=/var/run/upsd --with-dev --without-doc --without-python --without-python2 --with-user=nut --with-group=nut --with-drivers=auto --without-avahi --without-freeipmi --without-cgi --without-libltdl --with-usb --with-neon --without-snmp --with-ssl --without-pynut --without-python3 >>> nut 2.8.2 Building GIT_DIR=. PATH="/home/autobuild/autobuild/instance-18/output-1/host/bin:/home/autobuild/autobuild/instance-18/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /usr/bin/make -j1 -C /home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/ make[1]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2' Making all in include make[2]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/include' NUT_VERSION: "2.8.2" test -f "nut_version.h" || cp "nut_version.h.tmp" "nut_version.h" cmp -s "nut_version.h.tmp" "nut_version.h" || cp "nut_version.h.tmp" "nut_version.h" rm -f "nut_version.h.tmp" /usr/bin/make all-am make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/include' make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/include' make[2]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/include' Making all in common make[2]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' /usr/bin/make all-am make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' CC parseconf.lo CCLD libparseconf.la CC libcommon_la-state.lo CC libcommon_la-str.lo CC libcommon_la-upsconf.lo CC libcommon_la-common.lo CC libcommon_la-strnlen.lo CCLD libcommon.la CC libcommonclient_la-state.lo CC libcommonclient_la-str.lo CC libcommonclient_la-common.lo CC libcommonclient_la-strnlen.lo CCLD libcommonclient.la CXX libnutconf_la-nutconf.lo CXX libnutconf_la-nutstream.lo CXX libnutconf_la-nutwriter.lo CXX libnutconf_la-nutipc.lo CXXLD libnutconf.la make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[2]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' Making all in clients make[2]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/clients' CC upsc.o make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[3]: 'libcommonclient.la' is up to date. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' CC upsclient.lo CCLD libupsclient.la CCLD upsc CC upslog.o CCLD upslog CC upsrw.o CCLD upsrw CC upscmd.o CCLD upscmd CC upsmon.o make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[3]: 'libcommon.la' is up to date. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' CCLD upsmon CC upssched.o make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[3]: 'libparseconf.la' is up to date. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' CCLD upssched CXX nutclient.lo CXXLD libnutclient.la CXX nutclientmem.lo CXXLD libnutclientstub.la make[2]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/clients' Making all in conf make[2]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/conf' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/conf' Making all in data make[2]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/data' Making all in html make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/data/html' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/data/html' make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/data' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/data' make[2]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/data' Making all in docs make[2]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/docs' Making all in man make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/docs/man' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/docs/man' Making all in cables make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/docs/cables' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/docs/cables' make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/docs' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/docs' make[2]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/docs' Making all in drivers make[2]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/drivers' CC dummy_ups-dummy-ups.o CC main.lo CC dstate.lo CCLD libdummy.la CC upsdrvquery.lo CCLD libdummy_upsdrvquery.la make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[3]: 'libcommon.la' is up to date. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[3]: 'libparseconf.la' is up to date. make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[3]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/clients' make[4]: Entering directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[4]: 'libcommonclient.la' is up to date. make[4]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/common' make[3]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/clients' CCLD dummy-ups CC clone.o CC serial.lo CCLD libdummy_serial.la CCLD clone CC clone-outlet.o CCLD clone-outlet CC apcupsd_ups-apcupsd-ups.o CCLD apcupsd-ups CC skel.o CCLD skel CC al175.o CCLD al175 CC bcmxcp.o CC bcmxcp_ser.o CCLD bcmxcp CC belkin.o CCLD belkin CC belkinunv.o CCLD belkinunv CC bestfcom.o CCLD bestfcom CC bestfortress.o CCLD bestfortress CC bestuferrups.o CCLD bestuferrups CC bestups.o CCLD bestups CC etapro.o CCLD etapro CC everups.o CCLD everups CC gamatronic.o CCLD gamatronic /home/autobuild/autobuild/instance-18/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/13.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-18/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(strnlen.os): in function `__GI_strnlen': strnlen.c:(.text+0x0): multiple definition of `strnlen'; ../common/.libs/libcommon.a(libcommon_la-strnlen.o):strnlen.c:(.text+0x0): first defined here collect2: error: ld returned 1 exit status make[2]: *** [Makefile:1663: gamatronic] Error 1 make[2]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/drivers' make[1]: *** [Makefile:790: all-recursive] Error 1 make[1]: Leaving directory '/home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2' make: *** [package/pkg-generic.mk:289: /home/autobuild/autobuild/instance-18/output-1/build/nut-2.8.2/.stamp_built] Error 2 make: Leaving directory '/home/autobuild/autobuild/instance-18/buildroot'