for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /home/buildroot/instance-0/output-1/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /home/buildroot/instance-0/output-1/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /home/buildroot/instance-0/output-1/target/usr/bin/${prog}; done sord-0.16.12.tar.xz: OK (sha256: fde269893cb24b2ab7b75708d7a349c6e760c47a0d967aeca5b1c651294ff9f2) >>> sord 0.16.12 Extracting xzcat /home/buildroot/instance-0/dl/sord/sord-0.16.12.tar.xz | /home/buildroot/instance-0/output-1/host/bin/tar --strip-components=1 -C /home/buildroot/instance-0/output-1/build/sord-0.16.12 -xf - >>> sord 0.16.12 Patching >>> sord 0.16.12 Configuring rm -rf /home/buildroot/instance-0/output-1/build/sord-0.16.12//build mkdir -p /home/buildroot/instance-0/output-1/build/sord-0.16.12//build sed -e "/^\[binaries\]$/s:$::" -e "/^\[properties\]$/s:$::" -e "s%@TARGET_CC@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc-ar%g" -e "s%@TARGET_FC@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gfortran%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%m68k%g" -e "s%@TARGET_CPU@%5208%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static'%g" -e "s%@TARGET_LDFLAGS@%'-Wl,-elf2flt=-r', '-static'%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static'%g" -e "s%@BR2_CMAKE@%/home/buildroot/instance-0/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/instance-0/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/instance-0/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot%g" -e "s%@STATIC@%true%g" /home/buildroot/instance-0/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/instance-0/output-1/build/sord-0.16.12//build/cross-compilation.conf PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" CC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" PYTHONNOUSERSITE=y /home/buildroot/instance-0/output-1/host/bin/meson setup --prefix=/usr --libdir=lib --default-library=static --buildtype=release --cross-file=/home/buildroot/instance-0/output-1/build/sord-0.16.12//build/cross-compilation.conf -Db_pie=false -Db_staticpic=false -Dstrip=false -Dbuild.pkg_config_path=/home/buildroot/instance-0/output-1/host/lib/pkgconfig -Dbuild.cmake_prefix_path=/home/buildroot/instance-0/output-1/host/lib/cmake -Ddocs=disabled -Dtests=disabled /home/buildroot/instance-0/output-1/build/sord-0.16.12/ /home/buildroot/instance-0/output-1/build/sord-0.16.12//build The Meson build system Version: 1.3.1 Source dir: /home/buildroot/instance-0/output-1/build/sord-0.16.12 Build dir: /home/buildroot/instance-0/output-1/build/sord-0.16.12/build Build type: cross build Project name: sord Project version: 0.16.12 C compiler for the host machine: /home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc (gcc 12.3.0 "m68k-linux-gcc.br_real (Buildroot 2021.11-11272-ge2962af) 12.3.0") C linker for the host machine: /home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc ld.bfd 2.41 C compiler for the build machine: /usr/bin/gcc (gcc 10.2.1 "gcc (Debian 10.2.1-6) 10.2.1 20210110") C linker for the build machine: /usr/bin/gcc ld.bfd 2.35.2 Build machine cpu family: x86_64 Build machine cpu: x86_64 Host machine cpu family: m68k Host machine cpu: 5208 Target machine cpu family: m68k Target machine cpu: 5208 Library m found: YES Found pkg-config: YES (/home/buildroot/instance-0/output-1/host/bin/pkgconf) 1.6.3 Run-time dependency serd-0 found: YES 0.30.14 Found CMake: /home/buildroot/instance-0/output-1/host/bin/cmake (3.30.0) Run-time dependency libpcre found: NO (tried pkgconfig and cmake) Build targets in project: 2 sord 0.16.12 Tests : NO Utilities : YES Install prefix : /usr Headers : /usr/include Libraries : /usr/lib Executables : /usr/bin Man pages : /usr/share/man User defined options Cross files : /home/buildroot/instance-0/output-1/build/sord-0.16.12//build/cross-compilation.conf build.cmake_prefix_path: /home/buildroot/instance-0/output-1/host/lib/cmake build.pkg_config_path : /home/buildroot/instance-0/output-1/host/lib/pkgconfig buildtype : release default_library : static libdir : lib prefix : /usr strip : false b_pie : false b_staticpic : false docs : disabled tests : disabled Found ninja-1.11.1.git.kitware.jobserver-1 at /home/buildroot/instance-0/output-1/host/bin/ninja >>> sord 0.16.12 Building GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PYTHONNOUSERSITE=y /home/buildroot/instance-0/output-1/host/bin/ninja -C /home/buildroot/instance-0/output-1/build/sord-0.16.12//build ninja: Entering directory `/home/buildroot/instance-0/output-1/build/sord-0.16.12//build' [1/5] Compiling C object libsord-0.a.p/src_syntax.c.o [2/5] Compiling C object sordi.p/src_sordi.c.o [3/5] Compiling C object libsord-0.a.p/src_sord.c.o [4/5] Linking static target libsord-0.a [5/5] Linking target sordi >>> sord 0.16.12 Installing to staging directory GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" DESTDIR=/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot PYTHONNOUSERSITE=y /home/buildroot/instance-0/output-1/host/bin/ninja -C /home/buildroot/instance-0/output-1/build/sord-0.16.12//build install ninja: Entering directory `/home/buildroot/instance-0/output-1/build/sord-0.16.12//build' [0/1] Installing files. Installing libsord-0.a to /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib Installing sordi to /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/bin Installing /home/buildroot/instance-0/output-1/build/sord-0.16.12/include/sord/sord.h to /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/include/sord-0/sord Installing /home/buildroot/instance-0/output-1/build/sord-0.16.12/include/sord/sordmm.hpp to /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/include/sord-0/sord Installing /home/buildroot/instance-0/output-1/build/sord-0.16.12/build/meson-private/sord-0.pc to /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/pkgconfig >>> sord 0.16.12 Fixing libtool files for la in $(find /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/instance-0/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/instance-0/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/instance-0/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/instance-0/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sord 0.16.12 Installing to target GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" DESTDIR=/home/buildroot/instance-0/output-1/target PYTHONNOUSERSITE=y /home/buildroot/instance-0/output-1/host/bin/ninja -C /home/buildroot/instance-0/output-1/build/sord-0.16.12//build install ninja: Entering directory `/home/buildroot/instance-0/output-1/build/sord-0.16.12//build' [0/1] Installing files. Installing libsord-0.a to /home/buildroot/instance-0/output-1/target/usr/lib Installing sordi to /home/buildroot/instance-0/output-1/target/usr/bin Installing /home/buildroot/instance-0/output-1/build/sord-0.16.12/include/sord/sord.h to /home/buildroot/instance-0/output-1/target/usr/include/sord-0/sord Installing /home/buildroot/instance-0/output-1/build/sord-0.16.12/include/sord/sordmm.hpp to /home/buildroot/instance-0/output-1/target/usr/include/sord-0/sord Installing /home/buildroot/instance-0/output-1/build/sord-0.16.12/build/meson-private/sord-0.pc to /home/buildroot/instance-0/output-1/target/usr/lib/pkgconfig sratom-0.6.14.tar.xz: OK (sha256: 9982faf40db83aedd9b3850e499fecd6852b8b4ba6dede514013655cffaca1e6) >>> sratom 0.6.14 Extracting xzcat /home/buildroot/instance-0/dl/sratom/sratom-0.6.14.tar.xz | /home/buildroot/instance-0/output-1/host/bin/tar --strip-components=1 -C /home/buildroot/instance-0/output-1/build/sratom-0.6.14 -xf - >>> sratom 0.6.14 Patching >>> sratom 0.6.14 Configuring rm -rf /home/buildroot/instance-0/output-1/build/sratom-0.6.14//build mkdir -p /home/buildroot/instance-0/output-1/build/sratom-0.6.14//build sed -e "/^\[binaries\]$/s:$::" -e "/^\[properties\]$/s:$::" -e "s%@TARGET_CC@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc-ar%g" -e "s%@TARGET_FC@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gfortran%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%m68k%g" -e "s%@TARGET_CPU@%5208%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static'%g" -e "s%@TARGET_LDFLAGS@%'-Wl,-elf2flt=-r', '-static'%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static'%g" -e "s%@BR2_CMAKE@%/home/buildroot/instance-0/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/instance-0/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/instance-0/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot%g" -e "s%@STATIC@%true%g" /home/buildroot/instance-0/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/instance-0/output-1/build/sratom-0.6.14//build/cross-compilation.conf PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" CC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" PYTHONNOUSERSITE=y /home/buildroot/instance-0/output-1/host/bin/meson setup --prefix=/usr --libdir=lib --default-library=static --buildtype=release --cross-file=/home/buildroot/instance-0/output-1/build/sratom-0.6.14//build/cross-compilation.conf -Db_pie=false -Db_staticpic=false -Dstrip=false -Dbuild.pkg_config_path=/home/buildroot/instance-0/output-1/host/lib/pkgconfig -Dbuild.cmake_prefix_path=/home/buildroot/instance-0/output-1/host/lib/cmake -Ddocs=disabled -Dtests=disabled /home/buildroot/instance-0/output-1/build/sratom-0.6.14/ /home/buildroot/instance-0/output-1/build/sratom-0.6.14//build The Meson build system Version: 1.3.1 Source dir: /home/buildroot/instance-0/output-1/build/sratom-0.6.14 Build dir: /home/buildroot/instance-0/output-1/build/sratom-0.6.14/build Build type: cross build Project name: sratom Project version: 0.6.14 C compiler for the host machine: /home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc (gcc 12.3.0 "m68k-linux-gcc.br_real (Buildroot 2021.11-11272-ge2962af) 12.3.0") C linker for the host machine: /home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc ld.bfd 2.41 C compiler for the build machine: /usr/bin/gcc (gcc 10.2.1 "gcc (Debian 10.2.1-6) 10.2.1 20210110") C linker for the build machine: /usr/bin/gcc ld.bfd 2.35.2 Build machine cpu family: x86_64 Build machine cpu: x86_64 Host machine cpu family: m68k Host machine cpu: 5208 Target machine cpu family: m68k Target machine cpu: 5208 Compiler for C supports arguments -Wno-cast-align: YES Compiler for C supports arguments -Wno-cast-qual: YES Compiler for C supports arguments -Wno-conversion: YES Compiler for C supports arguments -Wno-inline: YES Compiler for C supports arguments -Wno-padded: YES Compiler for C supports arguments -Wno-suggest-attribute=pure: YES Compiler for C supports arguments -Wno-unsuffixed-float-constants: YES Compiler for C supports arguments -Wno-unused-const-variable: YES Library m found: YES Found pkg-config: YES (/home/buildroot/instance-0/output-1/host/bin/pkgconf) 1.6.3 Run-time dependency lv2 found: YES 1.18.10 Run-time dependency serd-0 found: YES 0.30.14 Run-time dependency sord-0 found: YES 0.16.12 Build targets in project: 1 sratom 0.6.14 Tests : NO Install prefix : /usr Headers : /usr/include Libraries : /usr/lib User defined options Cross files : /home/buildroot/instance-0/output-1/build/sratom-0.6.14//build/cross-compilation.conf build.cmake_prefix_path: /home/buildroot/instance-0/output-1/host/lib/cmake build.pkg_config_path : /home/buildroot/instance-0/output-1/host/lib/pkgconfig buildtype : release default_library : static libdir : lib prefix : /usr strip : false b_pie : false b_staticpic : false docs : disabled tests : disabled Found ninja-1.11.1.git.kitware.jobserver-1 at /home/buildroot/instance-0/output-1/host/bin/ninja >>> sratom 0.6.14 Building GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PYTHONNOUSERSITE=y /home/buildroot/instance-0/output-1/host/bin/ninja -C /home/buildroot/instance-0/output-1/build/sratom-0.6.14//build ninja: Entering directory `/home/buildroot/instance-0/output-1/build/sratom-0.6.14//build' [1/2] Compiling C object libsratom-0.a.p/src_sratom.c.o [2/2] Linking static target libsratom-0.a >>> sratom 0.6.14 Installing to staging directory GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" DESTDIR=/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot PYTHONNOUSERSITE=y /home/buildroot/instance-0/output-1/host/bin/ninja -C /home/buildroot/instance-0/output-1/build/sratom-0.6.14//build install ninja: Entering directory `/home/buildroot/instance-0/output-1/build/sratom-0.6.14//build' [0/1] Installing files. Installing libsratom-0.a to /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib Installing /home/buildroot/instance-0/output-1/build/sratom-0.6.14/include/sratom/sratom.h to /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/include/sratom-0/sratom Installing /home/buildroot/instance-0/output-1/build/sratom-0.6.14/build/meson-private/sratom-0.pc to /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/pkgconfig >>> sratom 0.6.14 Fixing libtool files for la in $(find /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/instance-0/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/instance-0/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/instance-0/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/instance-0/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sratom 0.6.14 Installing to target GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" DESTDIR=/home/buildroot/instance-0/output-1/target PYTHONNOUSERSITE=y /home/buildroot/instance-0/output-1/host/bin/ninja -C /home/buildroot/instance-0/output-1/build/sratom-0.6.14//build install ninja: Entering directory `/home/buildroot/instance-0/output-1/build/sratom-0.6.14//build' [0/1] Installing files. Installing libsratom-0.a to /home/buildroot/instance-0/output-1/target/usr/lib Installing /home/buildroot/instance-0/output-1/build/sratom-0.6.14/include/sratom/sratom.h to /home/buildroot/instance-0/output-1/target/usr/include/sratom-0/sratom Installing /home/buildroot/instance-0/output-1/build/sratom-0.6.14/build/meson-private/sratom-0.pc to /home/buildroot/instance-0/output-1/target/usr/lib/pkgconfig tzcode2024a.tar.gz: OK (sha512: 46da8bfa762c7d109db93e5c060789097fc0e1e38bdad5bb8fec886ef47f138bd03b913a743cd5f7e23dc359a72bfd63e7ffc0de199d2b51e6a174361dbdc43c) >>> host-zic 2024a Extracting gzip -d -c /home/buildroot/instance-0/dl/zic/tzcode2024a.tar.gz | /home/buildroot/instance-0/output-1/host/bin/tar --strip-components=0 -C /home/buildroot/instance-0/output-1/build/host-zic-2024a -xf - >>> host-zic 2024a Patching Applying 0001-remove-dependency-check-on-version-file.patch using patch: patching file Makefile Hunk #1 succeeded at 663 (offset 48 lines). >>> host-zic 2024a Configuring >>> host-zic 2024a Building GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/instance-0/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/instance-0/output-1/host/lib/pkgconfig:/home/buildroot/instance-0/output-1/host/share/pkgconfig" /usr/bin/make -j17 GIT_DIR=. PATH="/home/buildroot/instance-0/output-1/host/bin:/home/buildroot/instance-0/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/instance-0/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/instance-0/output-1/host/lib/pkgconfig:/home/buildroot/instance-0/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/instance-0/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/instance-0/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/instance-0/output-1/host/include" LDFLAGS="-L/home/buildroot/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/instance-0/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl -C /home/buildroot/instance-0/output-1/build/host-zic-2024a zic make[1]: Entering directory '/home/buildroot/instance-0/output-1/build/host-zic-2024a' printf '%s\n' >tzdir.h.out \ '#ifndef TZDEFAULT' \ '# define TZDEFAULT "/etc/localtime" /* default zone */' \ '#endif' \ '#ifndef TZDIR' \ '# define TZDIR "/usr/share/zoneinfo" /* TZif directory */' \ '#endif' VERSION=`cat version` && printf '%s\n' \ 'static char const PKGVERSION[]="(tzcode) ";' \ "static char const TZVERSION[]=\"$VERSION\";" \ 'static char const REPORT_BUGS_TO[]="tz@iana.org";' \ >version.h.out mv tzdir.h.out tzdir.h mv version.h.out version.h /usr/bin/gcc -O2 -I/home/buildroot/instance-0/output-1/host/include -I/home/buildroot/instance-0/output-1/host/include -c -o zic.o zic.c /usr/bin/gcc -o zic -O2 -I/home/buildroot/instance-0/output-1/host/include -L/home/buildroot/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/instance-0/output-1/host/lib zic.o make[1]: Leaving directory '/home/buildroot/instance-0/output-1/build/host-zic-2024a' >>> host-zic 2024a Installing to host directory /usr/bin/install -D -m 755 /home/buildroot/instance-0/output-1/build/host-zic-2024a/zic /home/buildroot/instance-0/output-1/host/sbin/zic /usr/bin/install -D -m 644 /home/buildroot/instance-0/output-1/build/host-zic-2024a/tzfile.h /home/buildroot/instance-0/output-1/host/include/tzfile.h tzdata2024a.tar.gz: OK (sha512: 1f09f1b2327cc9e1afc7e9045e83ee3377918dafe1bee2f282b6991828d03b3c70a4d3a17f9207dfb1361bb25bc214a8922a756e84fa114e9ba476226db57236) >>> host-tzdata 2024a Extracting gzip -d -c /home/buildroot/instance-0/dl/tzdata/tzdata2024a.tar.gz | /home/buildroot/instance-0/output-1/host/bin/tar --strip-components=0 -C /home/buildroot/instance-0/output-1/build/host-tzdata-2024a -xf - >>> host-tzdata 2024a Patching >>> host-tzdata 2024a Configuring >>> host-tzdata 2024a Building (cd /home/buildroot/instance-0/output-1/build/host-tzdata-2024a; for zone in africa antarctica asia australasia europe northamerica southamerica etcetera backward factory; do /home/buildroot/instance-0/output-1/host/sbin/zic -b fat -d _output/posix $zone || exit 1; /home/buildroot/instance-0/output-1/host/sbin/zic -b fat -d _output/right -L leapseconds $zone || exit 1; done; ) >>> host-tzdata 2024a Installing to host directory /usr/bin/install -d -m 0755 /home/buildroot/instance-0/output-1/host/share/zoneinfo cp -a /home/buildroot/instance-0/output-1/build/host-tzdata-2024a/_output/* /home/buildroot/instance-0/output-1/build/host-tzdata-2024a/*.tab /home/buildroot/instance-0/output-1/build/host-tzdata-2024a/leap-seconds.list /home/buildroot/instance-0/output-1/host/share/zoneinfo tzdump-e1a52ce12a701b8ea4163d6719713e38c0e53d35.tar.gz: OK (sha256: e078ba9bd90cb46368beb3cfef2288194e5edefd53ad9565961a97d1c7d6c59f) >>> host-tzdump e1a52ce12a701b8ea4163d6719713e38c0e53d35 Extracting gzip -d -c /home/buildroot/instance-0/dl/tzdump/tzdump-e1a52ce12a701b8ea4163d6719713e38c0e53d35.tar.gz | /home/buildroot/instance-0/output-1/host/bin/tar --strip-components=1 -C /home/buildroot/instance-0/output-1/build/host-tzdump-e1a52ce12a701b8ea4163d6719713e38c0e53d35 -xf - >>> host-tzdump e1a52ce12a701b8ea4163d6719713e38c0e53d35 Patching >>> host-tzdump e1a52ce12a701b8ea4163d6719713e38c0e53d35 Configuring >>> host-tzdump e1a52ce12a701b8ea4163d6719713e38c0e53d35 Building cd /home/buildroot/instance-0/output-1/build/host-tzdump-e1a52ce12a701b8ea4163d6719713e38c0e53d35 && /usr/bin/gcc -O2 -I/home/buildroot/instance-0/output-1/host/include -L/home/buildroot/instance-0/output-1/host/lib -Wl,-rpath,/home/buildroot/instance-0/output-1/host/lib -o tzdump tzdump.c tzdump.c: In function 'dumptzdata': tzdump.c:384:8: warning: 'strncat' specified bound 1024 equals destination size [-Wstringop-overflow=] 384 | (void)strncat(datafile, "/", sizeof datafile); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ tzdump.c:385:8: warning: 'strncat' specified bound 1024 equals destination size [-Wstringop-overflow=] 385 | (void)strncat(datafile, tzval, sizeof datafile); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >>> host-tzdump e1a52ce12a701b8ea4163d6719713e38c0e53d35 Installing to host directory /usr/bin/install -m 0755 -D /home/buildroot/instance-0/output-1/build/host-tzdump-e1a52ce12a701b8ea4163d6719713e38c0e53d35/tzdump /home/buildroot/instance-0/output-1/host/sbin/tzdump >>> tz Extracting >>> tz Patching >>> tz Configuring >>> tz Building (cd /home/buildroot/instance-0/output-1/host/share/zoneinfo/posix/; for i in $(find . -type f); do mkdir -p /home/buildroot/instance-0/output-1/build/tz/output/$(dirname $i); /home/buildroot/instance-0/output-1/host/sbin/tzdump -p . -q ${i#./} | sed '1d' > /home/buildroot/instance-0/output-1/build/tz/output/$i; done ) >>> tz Installing to target /usr/bin/install -D -m 0644 /home/buildroot/instance-0/output-1/host/share/zoneinfo/zone.tab /home/buildroot/instance-0/output-1/target/usr/share/zoneinfo/zone.tab /usr/bin/install -D -m 0644 /home/buildroot/instance-0/output-1/host/share/zoneinfo/iso3166.tab /home/buildroot/instance-0/output-1/target/usr/share/zoneinfo/iso3166.tab mkdir -p /home/buildroot/instance-0/output-1/target/usr/share/zoneinfo/uclibc cp -a /home/buildroot/instance-0/output-1/build/tz/output/* /home/buildroot/instance-0/output-1/target/usr/share/zoneinfo/uclibc if [ ! -f /home/buildroot/instance-0/output-1/target/usr/share/zoneinfo/uclibc/Etc/UTC ]; then printf "Error: '%s' is not a valid timezone, check your BR2_TARGET_LOCALTIME setting\n" "Etc/UTC"; exit 1; fi ln -sf ../usr/share/zoneinfo/uclibc/Etc/UTC /home/buildroot/instance-0/output-1/target/etc/TZ >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/instance-0/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%'-Wl,-elf2flt=-r', '-static'@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_FCFLAGS@%'-O2', '-g0', '-Wl,-elf2flt=-r', '-static'@PKG_TARGET_FCFLAGS@%g" -e "s%@TARGET_CC@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc-ar%g" -e "s%@TARGET_FC@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gfortran%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%m68k%g" -e "s%@TARGET_CPU@%5208%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/buildroot/instance-0/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/instance-0/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/instance-0/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot%g" -e "s%@STATIC@%true%g" /home/buildroot/instance-0/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/instance-0/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc%g" -e "s%@TARGET_CXX@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-g++%g" -e "s%@TARGET_AR@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gcc-ar%g" -e "s%@TARGET_FC@%/home/buildroot/instance-0/output-1/host/bin/m68k-linux-gfortran%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%m68k%g" -e "s%@TARGET_CPU@%5208%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%'-O2', '-g0', '-Wl,-elf2flt=-r', '-static'%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static'%g" -e "s%@TARGET_LDFLAGS@%'-Wl,-elf2flt=-r', '-static'%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O2', '-g0', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static', '-fno-dwarf2-cfi-asm', '-Wl,-elf2flt=-r', '-static'%g" -e "s%@BR2_CMAKE@%/home/buildroot/instance-0/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/instance-0/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/instance-0/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot%g" -e "s%@STATIC@%true%g" /home/buildroot/instance-0/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/instance-0/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/instance-0/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/instance-0/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/buildroot/instance-0/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/ash$' /home/buildroot/instance-0/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/instance-0/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/buildroot/instance-0/output-1/build/busybox-1.36.1/.config; then grep -qsE '^/bin/hush$' /home/buildroot/instance-0/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/instance-0/output-1/target/etc/shells; fi mkdir -p /home/buildroot/instance-0/output-1/target/etc echo "buildroot" > /home/buildroot/instance-0/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/instance-0/output-1/target/etc/hosts mkdir -p /home/buildroot/instance-0/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/instance-0/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/instance-0/output-1/target/etc/shadow rm -f /home/buildroot/instance-0/output-1/target/bin/sh if [ -x /home/buildroot/instance-0/output-1/target/sbin/swapon -a -x /home/buildroot/instance-0/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/buildroot/instance-0/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/buildroot/instance-0/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/buildroot/instance-0/output-1/build/locales.nopurge for dir in /home/buildroot/instance-0/output-1/target/usr/share/locale /home/buildroot/instance-0/output-1/target/usr/share/X11/locale /home/buildroot/instance-0/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/instance-0/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/instance-0/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/instance-0/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/instance-0/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/instance-0/output-1/target/usr/include /home/buildroot/instance-0/output-1/target/usr/share/aclocal \ /home/buildroot/instance-0/output-1/target/usr/lib/pkgconfig /home/buildroot/instance-0/output-1/target/usr/share/pkgconfig \ /home/buildroot/instance-0/output-1/target/usr/lib/cmake /home/buildroot/instance-0/output-1/target/usr/share/cmake \ /home/buildroot/instance-0/output-1/target/usr/lib/rpm /home/buildroot/instance-0/output-1/target/usr/doc find /home/buildroot/instance-0/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/instance-0/output-1/target/lib/ /home/buildroot/instance-0/output-1/target/usr/lib/ /home/buildroot/instance-0/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/instance-0/output-1/target/usr/share/gdb rm -rf /home/buildroot/instance-0/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/instance-0/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/instance-0/output-1/target/usr/share/zsh rm -rf /home/buildroot/instance-0/output-1/target/usr/man /home/buildroot/instance-0/output-1/target/usr/share/man rm -rf /home/buildroot/instance-0/output-1/target/usr/info /home/buildroot/instance-0/output-1/target/usr/share/info rm -rf /home/buildroot/instance-0/output-1/target/usr/doc /home/buildroot/instance-0/output-1/target/usr/share/doc rm -rf /home/buildroot/instance-0/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/instance-0/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/instance-0/output-1/target/lib/debug /home/buildroot/instance-0/output-1/target/usr/lib/debug find /home/buildroot/instance-0/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /home/buildroot/instance-0/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /home/buildroot/instance-0/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/instance-0/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/instance-0/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2024.05-1104-g73e8652b57"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2024.08-git"; \ echo "PRETTY_NAME=\"Buildroot 2024.08-git\"" \ ) > /home/buildroot/instance-0/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/instance-0/output-1/target/etc >>> Sanitizing RPATH in target tree PARALLEL_JOBS=17 \ PER_PACKAGE_DIR=/home/buildroot/instance-0/output-1/per-package \ /home/buildroot/instance-0/buildroot/support/scripts/fix-rpath target touch /home/buildroot/instance-0/output-1/target/usr ln -snf /home/buildroot/instance-0/output-1/host/m68k-buildroot-uclinux-uclibc/sysroot /home/buildroot/instance-0/output-1/staging make: Leaving directory '/home/buildroot/instance-0/buildroot' make: Entering directory '/home/buildroot/instance-0/buildroot' >>> Buildroot 2024.05-1104-g73e8652b57 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> host-tar 1.35 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-bootlin 2024.02-1 Collecting legal info >>> toolchain Collecting legal info >>> alsa-lib 1.2.12 Collecting legal info COPYING: OK (sha256: 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b) aserver/COPYING: OK (sha256: bfe16cf823bcff261fc6a062c07ee96660e3c39678f42f39a788a68dbc234ced) >>> host-autoconf 2.72 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> argp-standalone 1.4.1 Collecting legal info README.md: OK (sha256: b5db0353a5b1902fc8a2e055d8899dd0c189ce73a31e67af9a0ffc24711b63f0) >>> busybox 1.36.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> cpio 2.15 Collecting legal info COPYING: OK (sha256: fc82ca8b6fdb18d4e3e85cfd8ab58d1bcd3f1b29abe782895abd91d64763f8e7) >>> cantarell 0.0.25 Collecting legal info COPYING: OK (sha256: 79a9d6198c0d9192c1b0bf55bcbc404a39390bd0d8c650cf20d652c2eaa284d8) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> expat 2.6.2 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> file 5.45 Collecting legal info COPYING: OK (sha256: 0bfa856a9930bddadbef95d1be1cf4e163c0be618e76ea3275caaf255283e274) src/mygetopt.h: OK (sha256: 4ccb60d623884ef637af4a5bc16b2cb350163e2135e967655837336019a64462) src/vasprintf.c: OK (sha256: 2e14b6fa9a74f952ebfde3c96527158df281c953cfaf35609eb854d4da30131c) >>> host-file 5.45 Collecting legal info COPYING: OK (sha256: 0bfa856a9930bddadbef95d1be1cf4e163c0be618e76ea3275caaf255283e274) src/mygetopt.h: OK (sha256: 4ccb60d623884ef637af4a5bc16b2cb350163e2135e967655837336019a64462) src/vasprintf.c: OK (sha256: 2e14b6fa9a74f952ebfde3c96527158df281c953cfaf35609eb854d4da30131c) >>> host-zlib Collecting legal info >>> host-libzlib 1.3.1 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> xz 5.6.2 Collecting legal info COPYING: OK (sha256: ee3b35b82f7bb0ba5fd9f13ca34ebbe757a59c05bfde5ab9d50ff4188ed33396) COPYING.0BSD: OK (sha256: 0b01625d853911cd0e2e088dcfb743261034a091bb379246cb25a14cc4c74bf1) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-genimage 18 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-libconfuse 3.3 Collecting legal info LICENSE: OK (sha256: dc3ff4b62f851dd2e94a151061ffeb7d28ddfc880a442068dc5283dbaa927306) >>> gmp 6.3.0 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> hwdata 0.384 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) LICENSE: OK (sha256: 21d0406f93e884a050426ebc21931839a45d56bfcbcbfdda7686d583f36f107f) >>> initscripts Collecting legal info >>> jbig2dec 0.19 Collecting legal info LICENSE: OK (sha256: 1bf5258afe453934484fd0cea97508b72301633a6a78b0ae8a9ee44ac78f26d9) >>> libarchive 3.7.4 Collecting legal info COPYING: OK (sha256: b2cdf763345de2de34cebf54394df3c61a105c3b71288603c251f2fa638200ba) >>> libcgi 1.3.0 Collecting legal info LICENSES/LGPL-2.1.txt: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) LICENSES/MIT.txt: OK (sha256: f32c31e26ec840753a8cd47cd2681e48be4cee853212d16a4b1d85ac4d677669) >>> host-cmake 3.30.0 Collecting legal info Copyright.txt: OK (sha256: 0676e30827684487aa0ea8f72f01e9460a6320fa34a2888df0ad1dd3e8a06eb8) >>> libcue 2.3.0 Collecting legal info LICENSE: OK (sha256: c388d36583fa54e13b6d73ad924d0b68d073ed8a5771e17cb49104705df4504f) >>> host-bison 3.8.2 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> libcurl 8.9.0 Collecting legal info COPYING: OK (sha256: adb1fc06547fd136244179809f7b7c2d2ae6c4534f160aa513af9b6a12866a32) >>> libdvdcss 1.4.3 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> libdvdnav 6.1.1 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> libdvdread 6.1.3 Collecting legal info COPYING: OK (sha256: d6cb0e9e560f51085556949a84af12b79a00f10ab8b66c752537faf7cd665572) >>> libmicrohttpd 1.0.1 Collecting legal info COPYING: OK (sha256: 7399547209438c93f9b90297954698773d4846cea44cde5ca982c84c45952a3b) >>> libnpupnp 4.2.2 Collecting legal info COPYING: OK (sha256: c8b99423cad48bb44e2cf52a496361404290865eac259a82da6d1e4331ececb3) >>> lockdev 1.0.3 Collecting legal info LICENSE: OK (sha256: 5bbcbb737e60fe9deba08ecbd00920cfcc3403ba2e534c64fdeea49d6bb87509) >>> lv2 1.18.10 Collecting legal info COPYING: OK (sha256: 1e6bb175e193608b767ff25a4ed68b82c4db599491cf0d2694435cf60e9a4841) >>> host-meson 1.3.1 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.11.1.g95dee.kitware.jobserver-1 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-python-installer 0.7.0 Collecting legal info LICENSE: OK (sha256: 37b8b9f2569892fa54406383d431169dbb2115980d78b7efba6eeae5664c484f) >>> host-python-flit-core 3.9.0 Collecting legal info LICENSE: OK (sha256: 35b4f1dec512e617077fd6980dbb43ef8c2887adc5d0185edb4c04da175dd816) >>> host-python3 3.12.4 Collecting legal info LICENSE: OK (sha256: 3b2f81fe21d181c499c59a256c8e1968455d6689d269aa85373bfb6af41da3bf) >>> host-autoconf-archive 2023.02.20 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-expat 2.6.2 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> host-libffi 3.4.6 Collecting legal info LICENSE: OK (sha256: 67894089811f93fca47a76f85e017da6f8582d4ba0905963c6e0f1ad6df7a195) >>> host-python-pypa-build 1.2.1 Collecting legal info LICENSE: OK (sha256: aaf9a29ca5907971ccf07de025375db34539a8d5eeebce20b46099805722106f) >>> host-python-packaging 24.0 Collecting legal info LICENSE: OK (sha256: cad1ef5bd340d73e074ba614d26f7deaca5c7940c3d8c34852e65c4909686c48) LICENSE.APACHE: OK (sha256: 0d542e0c8804e39aa7f37eb00da5a762149dc682d7829451287e11b938e94594) LICENSE.BSD: OK (sha256: b70e7e9b742f1cc6f948b34c16aa39ffece94196364bc88ff0d2180f0028fac5) >>> host-python-pyproject-hooks 1.0.0 Collecting legal info LICENSE: OK (sha256: 1b22b049b5267d6dfc23a67bf4a84d8ec04b9fdfb1a51d360e42b4342c8b4154) >>> host-python-setuptools 71.0.3 Collecting legal info LICENSE: OK (sha256: 86da0f01aeae46348a3c3d465195dc1ceccde79f79e87769a64b8da04b2a4741) >>> host-python-wheel 0.40.0 Collecting legal info LICENSE.txt: OK (sha256: 30c23618679108f3e8ea1d2a658c7ca417bdfc891c98ef1a89fa4ff0c9828654) >>> mpfr 4.1.1 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> host-mtools 4.0.43 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-lzip 1.23 Collecting legal info COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef) >>> oniguruma 6.9.9 Collecting legal info COPYING: OK (sha256: 70ba5469ea0bab6e18a32d7009068f996503168d27be57747e08da34337ff26f) >>> host-patchelf 0.13 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pixz 1.0.7 Collecting legal info LICENSE: OK (sha256: d036806b4d1efee7c6d86276451c4d833e9798751417e25daae62dfbe348641b) >>> rtc-tools 33ef4aa1c92b0c92a351284d93d1ac5570de9cc7 Collecting legal info COPYING: OK (sha256: 7ae50a5344af14d6231aff6814632a220b3127da4099aea2c6070fd79c407c1a) >>> serd 0.30.14 Collecting legal info COPYING: OK (sha256: 13b62d3705cabee6a21730eb24f773249271c2d95e9ecbab16069e729d4ae147) >>> sg3_utils 1.48 Collecting legal info COPYING: OK (sha256: d212debdb0a5d7754c977f6dc53bb6c88b4ace7ab784ddbccd06bb970adb1a37) BSD_LICENSE: OK (sha256: 6b1a1de0b3394002973daaa407b93a1d2c13efd8dd1a32095d6872c36f09ba66) >>> sord 0.16.12 Collecting legal info COPYING: OK (sha256: e06562d6bcf0341b2ac2ad0f0ca36801d2ebf388d5ef297011625e4c36e963f0) >>> sratom 0.6.14 Collecting legal info COPYING: OK (sha256: 97742aacc982d8bb10d4450e3ce71dd02a9f26ba73a0eb822ef3356a74525597) >>> tz Collecting legal info >>> host-tzdata 2024a Collecting legal info LICENSE: OK (sha256: 0613408568889f5739e5ae252b722a2659c02002839ad970a63dc5e9174b27cf) >>> host-zic 2024a Collecting legal info LICENSE: OK (sha256: 0613408568889f5739e5ae252b722a2659c02002839ad970a63dc5e9174b27cf) >>> host-tzdump e1a52ce12a701b8ea4163d6719713e38c0e53d35 Collecting legal info WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-bootlin-2024.02-1: cannot save license (TOOLCHAIN_EXTERNAL_BOOTLIN_LICENSE_FILES not defined) WARNING: tzdump-e1a52ce12a701b8ea4163d6719713e38c0e53d35: cannot save license (HOST_TZDUMP_LICENSE_FILES not defined) Legal info produced in /home/buildroot/instance-0/output-1/legal-info make: Leaving directory '/home/buildroot/instance-0/buildroot'