make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/frontend' Making install in tools make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' /usr/bin/make install-am make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/pkgconfig' /usr/bin/install -c sane-config '/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/bin' /usr/bin/install -c -m 644 sane-backends.pc '/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c sane-find-scanner /home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/bin/umax_pp make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' Making install in po make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/po' if test "sane-backends" = "gettext-tools"; then \ /bin/mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/po' Making install in testsuite make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' Making install in sanei make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/sanei' Making install in tools make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS ChangeLog COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta '/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/share/doc/sane-backends' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' >>> sane-backends 1.0.27 Fixing package configuration files >>> sane-backends 1.0.27 Fixing libtool files for la in $(find /home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/run/instance-3/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/run/instance-3/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sane-backends 1.0.27 Installing to target PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/buildroot/autobuild/run/instance-3/output-1/target install -C /home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/ make[1]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' Making install in include make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/include' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/include' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/include' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/include/sane' /usr/bin/install -c -m 644 sane/sane.h sane/saneopts.h '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/include/sane' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/include' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/include' Making install in lib make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/lib' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/lib' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/lib' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/lib' Making install in sanei make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/sanei' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/sanei' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/sanei' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/sanei' Making install in backend make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/backend' /usr/bin/make install-am make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/backend' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/backend' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib' /bin/sh ../libtool --silent --mode=install /usr/bin/install -c libsane.la '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/sane' /bin/sh ../libtool --silent --mode=install /usr/bin/install -c libsane-abaton.la libsane-agfafocus.la libsane-apple.la libsane-artec.la libsane-artec_eplus48u.la libsane-as6e.la libsane-avision.la libsane-bh.la libsane-canon.la libsane-canon630u.la libsane-canon_dr.la libsane-cardscan.la libsane-coolscan.la libsane-coolscan2.la libsane-coolscan3.la libsane-dc25.la libsane-dmc.la libsane-epjitsu.la libsane-epson.la libsane-epson2.la libsane-fujitsu.la libsane-genesys.la libsane-gt68xx.la libsane-hp.la libsane-hp3500.la libsane-hp3900.la libsane-hp4200.la libsane-hp5400.la libsane-hp5590.la libsane-hpljm1005.la libsane-hs2p.la libsane-ibm.la libsane-kodak.la libsane-kodakaio.la libsane-kvs1025.la libsane-kvs20xx.la libsane-kvs40xx.la libsane-leo.la libsane-lexmark.la libsane-ma1509.la libsane-magicolor.la libsane-matsushita.la libsane-microtek.la libsane-microtek2.la libsane-mustek.la libsane-mustek_usb.la libsane-mustek_usb2.la libsane-nec.la libsane-net.la libsane-niash.la libsane-pie.la libsane-pieusb.la libsane-pixma.la libsane-plustek.la libsane-plustek_pp.la libsane-qcam.la libsane-ricoh.la libsane-rts8891.la libsane-s9036.la libsane-sceptre.la libsane-sharp.la libsane-sm3600.la libsane-sm3840.la libsane-snapscan.la libsane-sp15c.la libsane-st400.la libsane-stv680.la libsane-tamarack.la libsane-teco1.la libsane-teco2.la libsane-teco3.la libsane-test.la libsane-u12.la libsane-umax.la libsane-umax_pp.la libsane-umax1220u.la libsane-xerox_mfp.la libsane-p5.la libsane-dll.la '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/sane' libtool: install: warning: remember to run `libtool --finish /usr/lib' libtool: install: warning: remember to run `libtool --finish /usr/lib/sane' /usr/bin/make install-data-hook make[5]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/backend' rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/sane/libsane.* for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \ /bin/sh ../mkinstalldirs /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/sane/${dir} ; \ done test -z "/etc/sane.d" || /bin/mkdir -p "/home/buildroot/autobuild/run/instance-3/output-1/target/etc/sane.d" mkdir -p -- /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/sane/artec_eplus48u test -z "/etc/sane.d/dll.d" || /bin/mkdir -p "/home/buildroot/autobuild/run/instance-3/output-1/target/etc/sane.d/dll.d" mkdir -p -- /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/sane/gt68xx mkdir -p -- /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/sane/snapscan installing abaton.conf in /etc/sane.d/abaton.conf... installing agfafocus.conf in /etc/sane.d/agfafocus.conf... mkdir -p -- /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/sane/epjitsu installing apple.conf in /etc/sane.d/apple.conf... installing artec.conf in /etc/sane.d/artec.conf... installing artec_eplus48u.conf in /etc/sane.d/artec_eplus48u.conf... installing avision.conf in /etc/sane.d/avision.conf... installing bh.conf in /etc/sane.d/bh.conf... installing canon.conf in /etc/sane.d/canon.conf... installing canon630u.conf in /etc/sane.d/canon630u.conf... installing canon_dr.conf in /etc/sane.d/canon_dr.conf... installing cardscan.conf in /etc/sane.d/cardscan.conf... installing coolscan.conf in /etc/sane.d/coolscan.conf... installing coolscan2.conf in /etc/sane.d/coolscan2.conf... installing coolscan3.conf in /etc/sane.d/coolscan3.conf... installing dc25.conf in /etc/sane.d/dc25.conf... installing dmc.conf in /etc/sane.d/dmc.conf... installing epjitsu.conf in /etc/sane.d/epjitsu.conf... installing epson.conf in /etc/sane.d/epson.conf... installing epson2.conf in /etc/sane.d/epson2.conf... installing fujitsu.conf in /etc/sane.d/fujitsu.conf... installing genesys.conf in /etc/sane.d/genesys.conf... installing gt68xx.conf in /etc/sane.d/gt68xx.conf... installing hp.conf in /etc/sane.d/hp.conf... installing hp3900.conf in /etc/sane.d/hp3900.conf... installing hp4200.conf in /etc/sane.d/hp4200.conf... installing hp5400.conf in /etc/sane.d/hp5400.conf... installing hs2p.conf in /etc/sane.d/hs2p.conf... installing ibm.conf in /etc/sane.d/ibm.conf... installing kodak.conf in /etc/sane.d/kodak.conf... installing kodakaio.conf in /etc/sane.d/kodakaio.conf... installing kvs1025.conf in /etc/sane.d/kvs1025.conf... installing leo.conf in /etc/sane.d/leo.conf... installing lexmark.conf in /etc/sane.d/lexmark.conf... installing ma1509.conf in /etc/sane.d/ma1509.conf... installing magicolor.conf in /etc/sane.d/magicolor.conf... installing matsushita.conf in /etc/sane.d/matsushita.conf... installing microtek.conf in /etc/sane.d/microtek.conf... installing microtek2.conf in /etc/sane.d/microtek2.conf... installing mustek.conf in /etc/sane.d/mustek.conf... installing mustek_usb.conf in /etc/sane.d/mustek_usb.conf... installing nec.conf in /etc/sane.d/nec.conf... installing net.conf in /etc/sane.d/net.conf... installing pie.conf in /etc/sane.d/pie.conf... installing pieusb.conf in /etc/sane.d/pieusb.conf... installing pixma.conf in /etc/sane.d/pixma.conf... installing plustek.conf in /etc/sane.d/plustek.conf... installing plustek_pp.conf in /etc/sane.d/plustek_pp.conf... installing qcam.conf in /etc/sane.d/qcam.conf... installing ricoh.conf in /etc/sane.d/ricoh.conf... installing rts8891.conf in /etc/sane.d/rts8891.conf... installing s9036.conf in /etc/sane.d/s9036.conf... installing sceptre.conf in /etc/sane.d/sceptre.conf... installing sharp.conf in /etc/sane.d/sharp.conf... installing sm3840.conf in /etc/sane.d/sm3840.conf... installing snapscan.conf in /etc/sane.d/snapscan.conf... installing sp15c.conf in /etc/sane.d/sp15c.conf... installing st400.conf in /etc/sane.d/st400.conf... installing stv680.conf in /etc/sane.d/stv680.conf... installing tamarack.conf in /etc/sane.d/tamarack.conf... installing teco1.conf in /etc/sane.d/teco1.conf... installing teco2.conf in /etc/sane.d/teco2.conf... installing teco3.conf in /etc/sane.d/teco3.conf... installing test.conf in /etc/sane.d/test.conf... installing u12.conf in /etc/sane.d/u12.conf... installing umax.conf in /etc/sane.d/umax.conf... installing umax_pp.conf in /etc/sane.d/umax_pp.conf... installing umax1220u.conf in /etc/sane.d/umax1220u.conf... installing xerox_mfp.conf in /etc/sane.d/xerox_mfp.conf... installing p5.conf in /etc/sane.d/p5.conf... installing saned.conf in /etc/sane.d/saned.conf... installing dll.conf in /etc/sane.d/dll.conf... make[5]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/backend' make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/backend' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/backend' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/backend' Making install in frontend make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/frontend' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/frontend' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/sbin' /bin/sh ../libtool --mode=install /usr/bin/install -c scanimage '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c saned '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/sbin' libtool: install: /usr/bin/install -c saned /home/buildroot/autobuild/run/instance-3/output-1/target/usr/sbin/saned libtool: install: /usr/bin/install -c scanimage /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/scanimage make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/frontend' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/frontend' Making install in tools make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' /usr/bin/make install-am make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin' /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c sane-config '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin' /usr/bin/install -c -m 644 sane-backends.pc '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c sane-find-scanner /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/umax_pp make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/tools' Making install in po make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/po' if test "sane-backends" = "gettext-tools"; then \ /bin/mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/po' Making install in testsuite make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' Making install in sanei make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/sanei' Making install in tools make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS ChangeLog COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta '/home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/doc/sane-backends' make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' make[2]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/sane-backends-1.0.27' trace-cmd-trace-cmd-v2.7.tar.gz: OK (sha256: 3b3f564cc6ee30341051ccb7589b42f3abe4e676a21c029c7c127c7edf5bdcf0) >>> trace-cmd trace-cmd-v2.7 Extracting gzip -d -c /home/buildroot/autobuild/run/instance-3/dl/trace-cmd/trace-cmd-trace-cmd-v2.7.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-3/output-1/build/trace-cmd-trace-cmd-v2.7 -xf - >>> trace-cmd trace-cmd-v2.7 Patching Applying 0001-trace-listen-add-missing-header.patch using patch: patching file trace-listen.c >>> trace-cmd trace-cmd-v2.7 Configuring >>> trace-cmd trace-cmd-v2.7 Building /usr/bin/make -j4 PATH="/home/buildroot/autobuild/run/instance-3/output-1/host/bin:/home/buildroot/autobuild/run/instance-3/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-ar" AS="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-as" LD="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-ld" NM="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-nm" CC="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-gcc" GCC="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-gcc" CPP="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-cpp" CXX="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-g++" FC="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-gfortran" F77="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-gfortran" RANLIB="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-ranlib" READELF="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-readelf" STRIP="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-strip" OBJCOPY="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-objcopy" OBJDUMP="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/autobuild/run/instance-3/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/autobuild/run/instance-3/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/autobuild/run/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-3/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-as" DEFAULT_LINKER="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 " LDFLAGS="" FCFLAGS=" -O2 " FFLAGS=" -O2 " PKG_CONFIG="/home/buildroot/autobuild/run/instance-3/output-1/host/bin/pkg-config" STAGING_DIR="/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2" CPPFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64" NO_PYTHON=1 -C /home/buildroot/autobuild/run/instance-3/output-1/build/trace-cmd-trace-cmd-v2.7 all make[1]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/trace-cmd-trace-cmd-v2.7' UPDATE trace_plugin_dir UPDATE trace_python_dir UPDATE tc_version.h NO_PYTHON forced: swig not installed, not compling python plugins Note: to build the gui, type "make gui" to build man pages, type "make doc" COMPILE FPIC event-parse.o COMPILE FPIC trace-seq.o COMPILE FPIC parse-filter.o COMPILE FPIC parse-utils.o COMPILE FPIC str_error_r.o COMPILE FPIC trace-util.o COMPILE FPIC trace-input.o COMPILE FPIC trace-ftrace.o COMPILE FPIC trace-output.o COMPILE FPIC trace-recorder.o COMPILE FPIC trace-usage.o COMPILE FPIC trace-blk-hack.o COMPILE FPIC kbuffer-parse.o COMPILE FPIC event-plugin.o COMPILE FPIC trace-hooks.o COMPILE FPIC trace-msg.o COMPILE trace-cmd.o COMPILE trace-record.o COMPILE trace-read.o COMPILE trace-split.o COMPILE trace-listen.o COMPILE trace-stack.o COMPILE trace-hist.o COMPILE trace-mem.o COMPILE trace-snapshot.o COMPILE trace-stat.o COMPILE trace-hash.o COMPILE trace-profile.o /home/buildroot/autobuild/run/instance-3/output-1/build/trace-cmd-trace-cmd-v2.7/trace-profile.c:35:3: warning: #warning "lib audit not found, using raw syscalls " "(install libaudit-devel and try again)" [-Wcpp] # warning "lib audit not found, using raw syscalls " \ ^~~~~~~ COMPILE trace-stream.o COMPILE trace-restore.o COMPILE trace-check-events.o COMPILE trace-show.o COMPILE trace-list.o COMPILE PLUGIN OBJ plugin_jbd2.o COMPILE PLUGIN OBJ plugin_hrtimer.o COMPILE PLUGIN OBJ plugin_kmem.o COMPILE PLUGIN OBJ plugin_kvm.o COMPILE PLUGIN OBJ plugin_mac80211.o COMPILE PLUGIN OBJ plugin_sched_switch.o COMPILE PLUGIN OBJ plugin_function.o COMPILE PLUGIN OBJ plugin_xen.o COMPILE PLUGIN OBJ plugin_scsi.o COMPILE PLUGIN OBJ plugin_cfg80211.o COMPILE PLUGIN OBJ plugin_blk.o COMPILE PLUGIN OBJ plugin_tlb.o BUILD STATIC LIB libparsevent.a BUILD STATIC LIB libtracecmd.a BUILD PLUGIN plugin_jbd2.so BUILD PLUGIN plugin_hrtimer.so BUILD PLUGIN plugin_kmem.so BUILD PLUGIN plugin_kvm.so BUILD PLUGIN plugin_mac80211.so BUILD PLUGIN plugin_sched_switch.so BUILD PLUGIN plugin_function.so BUILD PLUGIN plugin_xen.so BUILD PLUGIN plugin_scsi.so BUILD PLUGIN plugin_cfg80211.so BUILD PLUGIN plugin_blk.so BUILD trace-cmd BUILD PLUGIN plugin_tlb.so make[1]: Leaving directory `/home/buildroot/autobuild/run/instance-3/output-1/build/trace-cmd-trace-cmd-v2.7' >>> trace-cmd trace-cmd-v2.7 Installing to staging directory >>> trace-cmd trace-cmd-v2.7 Fixing libtool files for la in $(find /home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/buildroot/autobuild/run/instance-3/output-1:@BASE_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot:@STAGING_DIR@:g" \ -e "s:/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot:g" \ -e "s:@BASE_DIR@:/home/buildroot/autobuild/run/instance-3/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> trace-cmd trace-cmd-v2.7 Installing to target /usr/bin/install -D -m 0755 /home/buildroot/autobuild/run/instance-3/output-1/build/trace-cmd-trace-cmd-v2.7/trace-cmd /home/buildroot/autobuild/run/instance-3/output-1/target/usr/bin/trace-cmd /usr/bin/install -d -m 0755 /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/trace-cmd/plugins /usr/bin/install -D -m 0755 /home/buildroot/autobuild/run/instance-3/output-1/build/trace-cmd-trace-cmd-v2.7/plugin_*.so /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/trace-cmd/plugins >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/buildroot/autobuild/run/instance-3/output-1/build/packages-file-list.txt ./support/scripts/check-uniq-files -t staging /home/buildroot/autobuild/run/instance-3/output-1/build/packages-file-list-staging.txt Warning: staging file "./usr/lib32" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/mtab" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/resolv.conf" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] ./support/scripts/check-uniq-files -t host /home/buildroot/autobuild/run/instance-3/output-1/build/packages-file-list-host.txt /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/inittab if grep -q CONFIG_ASH=y ./.config; then grep -qsE '^/bin/ash$' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells || echo "/bin/ash" >> /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells; fi grep: ./.config: No such file or directory if grep -q CONFIG_HUSH=y ./.config; then grep -qsE '^/bin/hush$' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells || echo "/bin/hush" >> /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shells; fi grep: ./.config: No such file or directory mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson sed -e "s%@TARGET_CROSS@%/home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-%g" -e "s%@TARGET_ARCH@%arm%g" -e "s%@TARGET_CPU@%arm926ej-s%g" -e "s%@TARGET_ENDIAN@%"little"%g" -e "s%@TARGET_CFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 `@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 `@PKG_TARGET_CFLAGS@%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/run/instance-3/output-1/host%g" package/meson//cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@PKG_TARGET_CFLAGS@%%g" -e "s%@PKG_TARGET_LDFLAGS@%%g" -e "s%@PKG_TARGET_CXXFLAGS@%%g" /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson/cross-compilation.conf.in > /home/buildroot/autobuild/run/instance-3/output-1/host/etc/meson/cross-compilation.conf mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/run/instance-3/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/run/instance-3/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/run/instance-3/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/autobuild/run/instance-3/output-1/target/etc/shadow rm -f /home/buildroot/autobuild/run/instance-3/output-1/target/bin/sh rm -f /home/buildroot/autobuild/run/instance-3/output-1/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/buildroot/autobuild/run/instance-3/output-1/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/autobuild/run/instance-3/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/include /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/cmake /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/cmake find /home/buildroot/autobuild/run/instance-3/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/run/instance-3/output-1/target/lib/ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/ /home/buildroot/autobuild/run/instance-3/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f find: `/home/buildroot/autobuild/run/instance-3/output-1/target/usr/libexec/': No such file or directory rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/man /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/info /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/doc /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/run/instance-3/output-1/target/usr/share 2>/dev/null || true find /home/buildroot/autobuild/run/instance-3/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/buildroot/autobuild/run/instance-3/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/autobuild/run/instance-3/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/buildroot/autobuild/run/instance-3/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/run/instance-3/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/run/instance-3/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.11-git-00674-gb8a7d02"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2019.11-git"; \ echo "PRETTY_NAME=\"Buildroot 2019.11-git\"" \ ) > /home/buildroot/autobuild/run/instance-3/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/run/instance-3/output-1/target/etc >>> Sanitizing RPATH in target tree /home/buildroot/autobuild/run/instance-3/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/run/instance-3/output-1/target/usr make: Leaving directory `/home/buildroot/autobuild/run/instance-3/buildroot' make: Entering directory `/home/buildroot/autobuild/run/instance-3/buildroot' >>> Buildroot 2019.11-git-00674-gb8a7d02 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> busybox 1.31.0 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> host-cmake 3.8.2 Collecting legal info Copyright.txt: OK (sha256: af3030e1bf1af2f534430fdfe3cfc5a617966648a2a7f0c06a631adc92be1e5f) >>> gettext-tiny c6dcdcdef801127549d3906d153c061880d25a73 Collecting legal info LICENSE: OK (sha256: b57aa4fdc1c614c28d41c1e2d5c4090935964c5f86291ba7d1c99ffd1d698b34) >>> gettext Collecting legal info >>> initscripts Collecting legal info >>> libconfuse 3.2.2 Collecting legal info LICENSE: OK (sha256: dc3ff4b62f851dd2e94a151061ffeb7d28ddfc880a442068dc5283dbaa927306) >>> libfuse 2.9.9 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> logsurfer 1.8 Collecting legal info >>> make 4.2.1 Collecting legal info ERROR: No hash found for COPYING >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> sane-backends 1.0.27 Collecting legal info COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa) >>> trace-cmd trace-cmd-v2.7 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) COPYING.LIB: OK (sha256: 70f297763149e72306919c924e164f83041d5e512868d4c8c1826c171b3e49f9) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) WARNING: logsurfer-1.8: cannot save license (LOGSURFER_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/run/instance-3/output-1/legal-info make: Leaving directory `/home/buildroot/autobuild/run/instance-3/buildroot'