>>> busybox 1.30.1 Downloading --2019-03-26 02:05:24-- http://www.busybox.net/downloads/busybox-1.30.1.tar.bz2 Resolving www.busybox.net (www.busybox.net)... 140.211.167.122 Connecting to www.busybox.net (www.busybox.net)|140.211.167.122|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://busybox.net/downloads/busybox-1.30.1.tar.bz2 [following] --2019-03-26 02:05:25-- https://busybox.net/downloads/busybox-1.30.1.tar.bz2 Resolving busybox.net (busybox.net)... 140.211.167.122 Connecting to busybox.net (busybox.net)|140.211.167.122|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 7793781 (7.4M) [application/x-bzip2] Saving to: '/home/peko/autobuild/instance-0/output/build/.busybox-1.30.1.tar.bz2.cbGDRC/output' 0K .......... .......... .......... .......... .......... 0% 151K 50s 50K .......... .......... .......... .......... .......... 1% 303K 37s 100K .......... .......... .......... .......... .......... 1% 111M 25s 150K .......... .......... .......... .......... .......... 2% 101M 18s 200K .......... .......... .......... .......... .......... 3% 304K 19s 250K .......... .......... .......... .......... .......... 3% 127M 16s 300K .......... .......... .......... .......... .......... 4% 122M 14s 350K .......... .......... .......... .......... .......... 5% 109M 12s 400K .......... .......... .......... .......... .......... 5% 305K 13s 450K .......... .......... .......... .......... .......... 6% 110M 12s 500K .......... .......... .......... .......... .......... 7% 123M 11s 550K .......... .......... .......... .......... .......... 7% 109M 10s 600K .......... .......... .......... .......... .......... 8% 109M 9s 650K .......... .......... .......... .......... .......... 9% 135M 8s 700K .......... .......... .......... .......... .......... 9% 110M 8s 750K .......... .......... .......... .......... .......... 10% 132M 7s 800K .......... .......... .......... .......... .......... 11% 91.3M 7s 850K .......... .......... .......... .......... .......... 11% 309K 7s 900K .......... .......... .......... .......... .......... 12% 114M 7s 950K .......... .......... .......... .......... .......... 13% 118M 7s 1000K .......... .......... .......... .......... .......... 13% 94.6M 6s 1050K .......... .......... .......... .......... .......... 14% 115M 6s 1100K .......... .......... .......... .......... .......... 15% 115M 6s 1150K .......... .......... .......... .......... .......... 15% 117M 5s 1200K .......... .......... .......... .......... .......... 16% 99.2M 5s 1250K .......... .......... .......... .......... .......... 17% 119M 5s 1300K .......... .......... .......... .......... .......... 17% 108M 5s 1350K .......... .......... .......... .......... .......... 18% 114M 4s 1400K .......... .......... .......... .......... .......... 19% 102M 4s 1450K .......... .......... .......... .......... .......... 19% 121M 4s 1500K .......... .......... .......... .......... .......... 20% 117M 4s 1550K .......... .......... .......... .......... .......... 21% 125M 4s 1600K .......... .......... .......... .......... .......... 21% 103M 4s 1650K .......... .......... .......... .......... .......... 22% 118M 3s 1700K .......... .......... .......... .......... .......... 22% 115M 3s 1750K .......... .......... .......... .......... .......... 23% 317K 4s 1800K .......... .......... .......... .......... .......... 24% 101M 4s 1850K .......... .......... .......... .......... .......... 24% 110M 3s 1900K .......... .......... .......... .......... .......... 25% 118M 3s 1950K .......... .......... .......... .......... .......... 26% 120M 3s 2000K .......... .......... .......... .......... .......... 26% 100M 3s 2050K .......... .......... .......... .......... .......... 27% 121M 3s 2100K .......... .......... .......... .......... .......... 28% 116M 3s 2150K .......... .......... .......... .......... .......... 28% 127M 3s 2200K .......... .......... .......... .......... .......... 29% 97.9M 3s 2250K .......... .......... .......... .......... .......... 30% 100M 3s 2300K .......... .......... .......... .......... .......... 30% 122M 3s 2350K .......... .......... .......... .......... .......... 31% 123M 3s 2400K .......... .......... .......... .......... .......... 32% 99.4M 2s 2450K .......... .......... .......... .......... .......... 32% 124M 2s 2500K .......... .......... .......... .......... .......... 33% 107M 2s 2550K .......... .......... .......... .......... .......... 34% 112M 2s 2600K .......... .......... .......... .......... .......... 34% 106M 2s 2650K .......... .......... .......... .......... .......... 35% 125M 2s 2700K .......... .......... .......... .......... .......... 36% 115M 2s 2750K .......... .......... .......... .......... .......... 36% 69.5M 2s 2800K .......... .......... .......... .......... .......... 37% 70.7M 2s 2850K .......... .......... .......... .......... .......... 38% 78.5M 2s 2900K .......... .......... .......... .......... .......... 38% 75.1M 2s 2950K .......... .......... .......... .......... .......... 39% 74.6M 2s 3000K .......... .......... .......... .......... .......... 40% 71.4M 2s 3050K .......... .......... .......... .......... .......... 40% 74.5M 2s 3100K .......... .......... .......... .......... .......... 41% 87.9M 2s 3150K .......... .......... .......... .......... .......... 42% 74.6M 2s 3200K .......... .......... .......... .......... .......... 42% 61.6M 2s 3250K .......... .......... .......... .......... .......... 43% 68.0M 2s 3300K .......... .......... .......... .......... .......... 44% 83.0M 1s 3350K .......... .......... .......... .......... .......... 44% 74.4M 1s 3400K .......... .......... .......... .......... .......... 45% 83.1M 1s 3450K .......... .......... .......... .......... .......... 45% 339K 2s 3500K .......... .......... .......... .......... .......... 46% 146M 2s 3550K .......... .......... .......... .......... .......... 47% 110M 1s 3600K .......... .......... .......... .......... .......... 47% 96.1M 1s 3650K .......... .......... .......... .......... .......... 48% 93.9M 1s 3700K .......... .......... .......... .......... .......... 49% 118M 1s 3750K .......... .......... .......... .......... .......... 49% 123M 1s 3800K .......... .......... .......... .......... .......... 50% 104M 1s 3850K .......... .......... .......... .......... .......... 51% 130M 1s 3900K .......... .......... .......... .......... .......... 51% 103M 1s 3950K .......... .......... .......... .......... .......... 52% 129M 1s 4000K .......... .......... .......... .......... .......... 53% 92.1M 1s 4050K .......... .......... .......... .......... .......... 53% 126M 1s 4100K .......... .......... .......... .......... .......... 54% 107M 1s 4150K .......... .......... .......... .......... .......... 55% 127M 1s 4200K .......... .......... .......... .......... .......... 55% 98.3M 1s 4250K .......... .......... .......... .......... .......... 56% 119M 1s 4300K .......... .......... .......... .......... .......... 57% 116M 1s 4350K .......... .......... .......... .......... .......... 57% 101M 1s 4400K .......... .......... .......... .......... .......... 58% 102M 1s 4450K .......... .......... .......... .......... .......... 59% 130M 1s 4500K .......... .......... .......... .......... .......... 59% 123M 1s 4550K .......... .......... .......... .......... .......... 60% 105M 1s 4600K .......... .......... .......... .......... .......... 61% 107M 1s 4650K .......... .......... .......... .......... .......... 61% 113M 1s 4700K .......... .......... .......... .......... .......... 62% 144M 1s 4750K .......... .......... .......... .......... .......... 63% 103M 1s 4800K .......... .......... .......... .......... .......... 63% 106M 1s 4850K .......... .......... .......... .......... .......... 64% 99.7M 1s 4900K .......... .......... .......... .......... .......... 65% 148M 1s 4950K .......... .......... .......... .......... .......... 65% 99.9M 1s 5000K .......... .......... .......... .......... .......... 66% 128M 1s 5050K .......... .......... .......... .......... .......... 67% 104M 1s 5100K .......... .......... .......... .......... .......... 67% 146M 1s 5150K .......... .......... .......... .......... .......... 68% 100M 1s 5200K .......... .......... .......... .......... .......... 68% 105M 1s 5250K .......... .......... .......... .......... .......... 69% 101M 1s 5300K .......... .......... .......... .......... .......... 70% 121M 1s 5350K .......... .......... .......... .......... .......... 70% 117M 1s 5400K .......... .......... .......... .......... .......... 71% 94.5M 1s 5450K .......... .......... .......... .......... .......... 72% 146M 1s 5500K .......... .......... .......... .......... .......... 72% 105M 0s 5550K .......... .......... .......... .......... .......... 73% 102M 0s 5600K .......... .......... .......... .......... .......... 74% 104M 0s 5650K .......... .......... .......... .......... .......... 74% 100M 0s 5700K .......... .......... .......... .......... .......... 75% 100M 0s 5750K .......... .......... .......... .......... .......... 76% 99.5M 0s 5800K .......... .......... .......... .......... .......... 76% 73.6M 0s 5850K .......... .......... .......... .......... .......... 77% 74.5M 0s 5900K .......... .......... .......... .......... .......... 78% 77.6M 0s 5950K .......... .......... .......... .......... .......... 78% 69.4M 0s 6000K .......... .......... .......... .......... .......... 79% 63.2M 0s 6050K .......... .......... .......... .......... .......... 80% 75.3M 0s 6100K .......... .......... .......... .......... .......... 80% 72.4M 0s 6150K .......... .......... .......... .......... .......... 81% 70.6M 0s 6200K .......... .......... .......... .......... .......... 82% 64.0M 0s 6250K .......... .......... .......... .......... .......... 82% 92.7M 0s 6300K .......... .......... .......... .......... .......... 83% 68.7M 0s 6350K .......... .......... .......... .......... .......... 84% 78.5M 0s 6400K .......... .......... .......... .......... .......... 84% 62.0M 0s 6450K .......... .......... .......... .......... .......... 85% 71.6M 0s 6500K .......... .......... .......... .......... .......... 86% 369K 0s 6550K .......... .......... .......... .......... .......... 86% 70.9M 0s 6600K .......... .......... .......... .......... .......... 87% 99.5M 0s 6650K .......... .......... .......... .......... .......... 88% 119M 0s 6700K .......... .......... .......... .......... .......... 88% 101M 0s 6750K .......... .......... .......... .......... .......... 89% 106M 0s 6800K .......... .......... .......... .......... .......... 89% 83.9M 0s 6850K .......... .......... .......... .......... .......... 90% 105M 0s 6900K .......... .......... .......... .......... .......... 91% 127M 0s 6950K .......... .......... .......... .......... .......... 91% 111M 0s 7000K .......... .......... .......... .......... .......... 92% 115M 0s 7050K .......... .......... .......... .......... .......... 93% 120M 0s 7100K .......... .......... .......... .......... .......... 93% 123M 0s 7150K .......... .......... .......... .......... .......... 94% 100M 0s 7200K .......... .......... .......... .......... .......... 95% 108M 0s 7250K .......... .......... .......... .......... .......... 95% 104M 0s 7300K .......... .......... .......... .......... .......... 96% 159M 0s 7350K .......... .......... .......... .......... .......... 97% 114M 0s 7400K .......... .......... .......... .......... .......... 97% 119M 0s 7450K .......... .......... .......... .......... .......... 98% 112M 0s 7500K .......... .......... .......... .......... .......... 99% 98.0M 0s 7550K .......... .......... .......... .......... .......... 99% 128M 0s 7600K .......... . 100% 108M=1.5s 2019-03-26 02:05:28 (4.96 MB/s) - '/home/peko/autobuild/instance-0/output/build/.busybox-1.30.1.tar.bz2.cbGDRC/output' saved [7793781/7793781] busybox-1.30.1.tar.bz2: OK (sha256: 3d1d04a4dbd34048f4794815a5c48ebb9eb53c5277e09ffffc060323b95dfbdc) >>> busybox 1.30.1 Extracting bzcat /home/peko/autobuild/instance-0/dl/busybox/busybox-1.30.1.tar.bz2 | tar --strip-components=1 -C /home/peko/autobuild/instance-0/output/build/busybox-1.30.1 -xf - >>> busybox 1.30.1 Patching Applying 0001-networking-libiproute-use-linux-if_packet.h-instead-.patch using patch: patching file networking/libiproute/iplink.c Applying 0002-Makefile.flags-strip-non-l-arguments-returned-by-pkg.patch using patch: patching file Makefile.flags Using /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config as base # # merged configuration written to /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config (needs make) # make[1]: Entering directory '/home/peko/autobuild/instance-0/output/build/busybox-1.30.1' HOSTCC scripts/basic/fixdep GEN include/applets.h GEN include/usage.h HOSTCC scripts/basic/docproc HOSTCC scripts/basic/split-include GEN findutils/Kbuild GEN findutils/Config.in GEN e2fsprogs/Kbuild GEN e2fsprogs/Config.in GEN libpwdgrp/Kbuild GEN coreutils/Kbuild GEN coreutils/Config.in GEN coreutils/libcoreutils/Kbuild GEN runit/Kbuild GEN runit/Config.in GEN applets/Kbuild GEN console-tools/Kbuild GEN console-tools/Config.in GEN debianutils/Kbuild GEN debianutils/Config.in GEN printutils/Kbuild GEN printutils/Config.in GEN init/Kbuild GEN init/Config.in GEN klibc-utils/Kbuild GEN klibc-utils/Config.in GEN archival/Kbuild GEN archival/Config.in GEN archival/libarchive/Kbuild GEN selinux/Kbuild GEN selinux/Config.in GEN libbb/Kbuild GEN libbb/Config.in GEN modutils/Kbuild GEN modutils/Config.in GEN sysklogd/Kbuild GEN sysklogd/Config.in GEN shell/Kbuild GEN shell/Config.in GEN mailutils/Kbuild GEN mailutils/Config.in GEN procps/Kbuild GEN procps/Config.in GEN util-linux/Kbuild GEN util-linux/Config.in GEN util-linux/volume_id/Kbuild GEN util-linux/volume_id/Config.in GEN scripts/Kbuild GEN editors/Kbuild GEN editors/Config.in GEN loginutils/Kbuild GEN loginutils/Config.in GEN miscutils/Kbuild GEN miscutils/Config.in GEN networking/Kbuild GEN networking/Config.in GEN networking/udhcp/Kbuild GEN networking/udhcp/Config.in GEN networking/libiproute/Kbuild HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/kxgettext.o HOSTCC scripts/kconfig/mconf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/lex.zconf.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf -o Config.in .config:286:warning: trying to assign nonexistent symbol FEATURE_FLOAT_SLEEP # # using defaults found in .config # * * Busybox Configuration * * * Settings * Enable compatibility for full-blown desktop systems (DESKTOP) [Y/n/?] y Provide compatible behavior for rare corner cases (bigger code) (EXTRA_COMPAT) [N/y/?] n Building for Fedora distribution (FEDORA_COMPAT) [N/y/?] n Enable obsolete features removed before SUSv3 (INCLUDE_SUSv2) [Y/n/?] y Support --long-options (LONG_OPTS) [Y/?] y Show applet usage messages (SHOW_USAGE) [Y/n/?] y Show verbose applet usage messages (FEATURE_VERBOSE_USAGE) [Y/n/?] y Store applet usage messages in compressed form (FEATURE_COMPRESS_USAGE) [N/y/?] n Support files > 2 GB (LFS) [Y/n/?] y Support PAM (Pluggable Authentication Modules) (PAM) [N/y/?] n Use the devpts filesystem for Unix98 PTYs (FEATURE_DEVPTS) [Y/n/?] y Support utmp file (FEATURE_UTMP) [Y/n/?] y Support wtmp file (FEATURE_WTMP) [Y/n/?] y Support writing pidfiles (FEATURE_PIDFILE) [N/y/?] n Include busybox applet (BUSYBOX) [Y/n/?] y Support --show SCRIPT (FEATURE_SHOW_SCRIPT) [Y/n] (NEW) Support --install [-s] to install applet links at runtime (FEATURE_INSTALLER) [Y/n/?] y Don't use /usr (INSTALL_NO_USR) [N/y/?] n Drop SUID state for most applets (FEATURE_SUID) [Y/n/?] y Enable SUID configuration via /etc/busybox.conf (FEATURE_SUID_CONFIG) [N/y/?] n exec prefers applets (FEATURE_PREFER_APPLETS) [N/y/?] n Path to busybox executable (BUSYBOX_EXEC_PATH) [/proc/self/exe] /proc/self/exe Support NSA Security Enhanced Linux (SELINUX) [N/y/?] n Clean up all memory before exiting (usually not needed) (FEATURE_CLEAN_UP) [N/y/?] n * * Build Options * Build static binary (no shared libs) (STATIC) [N/y/?] n Build position independent executable (PIE) [N/y/?] n Force NOMMU build (NOMMU) [N/y/?] n Build shared libbusybox (BUILD_LIBBUSYBOX) [N/y/?] n Cross compiler prefix (CROSS_COMPILER_PREFIX) [] Path to sysroot (SYSROOT) [] Additional CFLAGS (EXTRA_CFLAGS) [] Additional LDFLAGS (EXTRA_LDFLAGS) [] Additional LDLIBS (EXTRA_LDLIBS) [] Avoid using GCC-specific code constructs (USE_PORTABLE_CODE) [N/y/?] n Use -mpreferred-stack-boundary=2 on i386 arch (STACK_OPTIMIZATION_386) [Y/n/?] (NEW) * * Installation Options ("make install" behavior) * What kind of applet links to install > 1. as soft-links (INSTALL_APPLET_SYMLINKS) 2. as hard-links (INSTALL_APPLET_HARDLINKS) 3. as script wrappers (INSTALL_APPLET_SCRIPT_WRAPPERS) 4. not installed (INSTALL_APPLET_DONT) choice[1-4?]: 1 Destination path for 'make install' (PREFIX) [./_install] ./_install * * Debugging Options * Build with debug information (DEBUG) [N/y/?] n Enable runtime sanitizers (ASAN/LSAN/USAN/etc...) (DEBUG_SANITIZE) [N/y/?] n Build unit tests (UNIT_TEST) [N/y/?] n Abort compilation on any warning (WERROR) [N/y/?] n Additional debugging library > 1. None (NO_DEBUG_LIB) 2. Dmalloc (DMALLOC) 3. Electric-fence (EFENCE) choice[1-3?]: 1 * * Library Tuning * Use the end of BSS page (FEATURE_USE_BSS_TAIL) [N/y/?] n Enable fractional duration arguments (FLOAT_DURATION) [Y/n/?] (NEW) Support RTMIN[+n] and RTMAX[-n] signal names (FEATURE_RTMINMAX) [Y/n/?] y Use the definitions of SIGRTMIN/SIGRTMAX provided by libc (FEATURE_RTMINMAX_USE_LIBC_DEFINITIONS) [Y/n/?] (NEW) Buffer allocation policy > 1. Allocate with Malloc (FEATURE_BUFFERS_USE_MALLOC) 2. Allocate on the Stack (FEATURE_BUFFERS_GO_ON_STACK) 3. Allocate in the .bss section (FEATURE_BUFFERS_GO_IN_BSS) choice[1-3?]: 1 Minimum password length (PASSWORD_MINLEN) [6] 6 MD5: Trade bytes for speed (0:fast, 3:slow) (MD5_SMALL) [1] 1 SHA3: Trade bytes for speed (0:fast, 1:slow) (SHA3_SMALL) [1] 1 Faster /proc scanning code (+100 bytes) (FEATURE_FAST_TOP) [N/y/?] n Support /etc/networks (FEATURE_ETC_NETWORKS) [N/y/?] n Consult /etc/services even for well-known ports (FEATURE_ETC_SERVICES) [N/y/?] (NEW) Command line editing (FEATURE_EDITING) [Y/n/?] y Maximum length of input (FEATURE_EDITING_MAX_LEN) [1024] 1024 vi-style line editing commands (FEATURE_EDITING_VI) [Y/n/?] y History size (FEATURE_EDITING_HISTORY) [999] 999 History saving (FEATURE_EDITING_SAVEHISTORY) [Y/n/?] y Save history on shell exit, not after every command (FEATURE_EDITING_SAVE_ON_EXIT) [N/y/?] n Reverse history search (FEATURE_REVERSE_SEARCH) [Y/n/?] y Tab completion (FEATURE_TAB_COMPLETION) [Y/n] y Username completion (FEATURE_USERNAME_COMPLETION) [N/y] n Fancy shell prompts (FEATURE_EDITING_FANCY_PROMPT) [Y/n/?] y Enable automatic tracking of window size changes (FEATURE_EDITING_WINCH) [Y/n] (NEW) Query cursor position from terminal (FEATURE_EDITING_ASK_TERMINAL) [N/y/?] n Enable locale support (system needs locale for this to work) (LOCALE_SUPPORT) [N/y/?] n Support Unicode (UNICODE_SUPPORT) [N/y/?] n Non-POSIX, but safer, copying to special nodes (FEATURE_NON_POSIX_CP) [Y/n/?] y Give more precise messages when copy fails (cp, mv etc) (FEATURE_VERBOSE_CP_MESSAGE) [N/y/?] n Use sendfile system call (FEATURE_USE_SENDFILE) [Y/n/?] y Copy buffer size, in kilobytes (FEATURE_COPYBUF_KB) [4] 4 Skip rootfs in mount table (FEATURE_SKIP_ROOTFS) [Y/n/?] y Use clock_gettime(CLOCK_MONOTONIC) syscall (MONOTONIC_SYSCALL) [Y/n/?] y Use ioctl names rather than hex values in error messages (IOCTL_HEX2STR_ERROR) [Y/n/?] y Support infiniband HW (FEATURE_HWIB) [Y/n/?] y * * Applets * * * Archival Utilities * Make tar, rpm, modprobe etc understand .xz data (FEATURE_SEAMLESS_XZ) [N/y] n Make tar, rpm, modprobe etc understand .lzma data (FEATURE_SEAMLESS_LZMA) [N/y] n Make tar, rpm, modprobe etc understand .bz2 data (FEATURE_SEAMLESS_BZ2) [N/y] n Make tar, rpm, modprobe etc understand .gz data (FEATURE_SEAMLESS_GZ) [N/y] n Make tar, rpm, modprobe etc understand .Z data (FEATURE_SEAMLESS_Z) [N/y] n ar (9.5 kb) (AR) [Y/n/?] y Support long filenames (not needed for debs) (FEATURE_AR_LONG_FILENAMES) [N/y/?] n Support archive creation (FEATURE_AR_CREATE) [Y/n/?] y uncompress (7.1 kb) (UNCOMPRESS) [N/y/?] n gunzip (11 kb) (GUNZIP) [Y/n/?] y zcat (24 kb) (ZCAT) [Y/n/?] y Enable long options (FEATURE_GUNZIP_LONG_OPTIONS) [Y/n] y bunzip2 (8.7 kb) (BUNZIP2) [Y/n/?] y bzcat (8.7 kb) (BZCAT) [Y/n/?] y unlzma (7.5 kb) (UNLZMA) [Y/n/?] y lzcat (7.5 kb) (LZCAT) [Y/n/?] y lzma -d (LZMA) [Y/n/?] y unxz (13 kb) (UNXZ) [Y/n/?] y xzcat (13 kb) (XZCAT) [Y/n/?] y xz -d (XZ) [Y/n/?] y bzip2 (16 kb) (BZIP2) [N/y/?] n Enable decompression (FEATURE_BZIP2_DECOMPRESS) [Y/?] y cpio (15 kb) (CPIO) [Y/n/?] y Support archive creation (FEATURE_CPIO_O) [N/y/?] n dpkg (43 kb) (DPKG) [N/y/?] n dpkg-deb (30 kb) (DPKG_DEB) [N/y/?] n gzip (17 kb) (GZIP) [Y/n/?] y Enable long options (FEATURE_GZIP_LONG_OPTIONS) [N/y] n Trade memory for speed (0:small,slow - 2:fast,big) (GZIP_FAST) [0] 0 Enable compression levels (FEATURE_GZIP_LEVELS) [N/y/?] n Enable decompression (FEATURE_GZIP_DECOMPRESS) [Y/?] y lzop (12 kb) (LZOP) [N/y/?] n unlzop (13 kb) (UNLZOP) [Y/n/?] y lzopcat (13 kb) (LZOPCAT) [Y/n/?] y lzop compression levels 7,8,9 (not very useful) (LZOP_COMPR_HIGH) [N/y/?] n rpm (32 kb) (RPM) [N/y/?] n rpm2cpio (21 kb) (RPM2CPIO) [N/y/?] n tar (39 kb) (TAR) [Y/n/?] y Enable long options (FEATURE_TAR_LONG_OPTIONS) [Y/n] y Enable -c (archive creation) (FEATURE_TAR_CREATE) [Y/n] y Enable -X (exclude from) and -T (include from) options (FEATURE_TAR_FROM) [Y/n/?] y Support old tar header format (FEATURE_TAR_OLDGNU_COMPATIBILITY) [N/y/?] n Enable untarring of tarballs with checksums produced by buggy Sun tar (FEATURE_TAR_OLDSUN_COMPATIBILITY) [N/y/?] n Support GNU tar extensions (long filenames) (FEATURE_TAR_GNU_EXTENSIONS) [Y/n] y Support writing to an external program (--to-command) (FEATURE_TAR_TO_COMMAND) [Y/n/?] y Enable use of user and group names (FEATURE_TAR_UNAME_GNAME) [N/y/?] n Enable -m (do not preserve time) GNU option (FEATURE_TAR_NOPRESERVE_TIME) [N/y] n unzip (26 kb) (UNZIP) [Y/n/?] y Read and use Central Directory data (FEATURE_UNZIP_CDF) [Y/n/?] y Support compression method 12 (bzip2) (FEATURE_UNZIP_BZIP2) [Y/n] y Support compression method 14 (lzma) (FEATURE_UNZIP_LZMA) [Y/n] y Support compression method 95 (xz) (FEATURE_UNZIP_XZ) [Y/n] y Optimize lzma for speed (FEATURE_LZMA_FAST) [N/y/?] n * * Coreutils * basename (438 bytes) (BASENAME) [Y/n/?] y cat (5.6 kb) (CAT) [Y/?] y Enable -n and -b options (FEATURE_CATN) [Y/n/?] y cat -v[etA] (FEATURE_CATV) [Y/n/?] y chgrp (7.6 kb) (CHGRP) [Y/n/?] y chmod (5.5 kb) (CHMOD) [Y/n/?] y chown (7.6 kb) (CHOWN) [Y/n/?] y Enable long options (FEATURE_CHOWN_LONG_OPTIONS) [N/y] n chroot (3.7 kb) (CHROOT) [Y/n/?] y cksum (4.1 kb) (CKSUM) [Y/n/?] y comm (4.2 kb) (COMM) [N/y/?] n cp (10 kb) (CP) [Y/n/?] y Enable long options (FEATURE_CP_LONG_OPTIONS) [N/y/?] n cut (5.8 kb) (CUT) [Y/n/?] y date (7 kb) (DATE) [Y/n/?] y Enable ISO date format output (-I) (FEATURE_DATE_ISOFMT) [Y/n/?] y Support %[num]N nanosecond format specifier (FEATURE_DATE_NANO) [N/y/?] n Support weird 'date MMDDhhmm[[YY]YY][.ss]' format (FEATURE_DATE_COMPAT) [Y/n/?] y dd (7.5 kb) (DD) [Y/n/?] y Enable signal handling for status reporting (FEATURE_DD_SIGNAL_HANDLING) [Y/n/?] y Enable the third status line upon signal (FEATURE_DD_THIRD_STATUS_LINE) [N/y/?] n Enable ibs, obs, iflag, oflag and conv options (FEATURE_DD_IBS_OBS) [Y/n/?] y Enable status display options (FEATURE_DD_STATUS) [Y/n/?] y df (6.8 kb) (DF) [Y/n/?] y Enable -a, -i, -B (FEATURE_DF_FANCY) [N/y/?] n dirname (329 bytes) (DIRNAME) [Y/n/?] y dos2unix (5.2 kb) (DOS2UNIX) [Y/n/?] y unix2dos (5.2 kb) (UNIX2DOS) [Y/n/?] y du (6.3 kb) (DU) [Y/n/?] y Use default blocksize of 1024 bytes (else it's 512 bytes) (FEATURE_DU_DEFAULT_BLOCKSIZE_1K) [Y/n] y echo (1.8 kb) (ECHO) [Y/?] y Enable -n and -e options (FEATURE_FANCY_ECHO) [Y/n] y env (4 kb) (ENV) [Y/n/?] y expand (5.1 kb) (EXPAND) [N/y/?] n unexpand (5.3 kb) (UNEXPAND) [N/y/?] n expr (6.6 kb) (EXPR) [Y/n/?] y Extend Posix numbers support to 64 bit (EXPR_MATH_SUPPORT_64) [Y/n/?] y factor (2.7 kb) (FACTOR) [Y/n/?] y false (tiny) (FALSE) [Y/n/?] y fold (4.6 kb) (FOLD) [Y/n/?] y fsync (3.6 kb) (FSYNC) [N/y/?] n head (3.8 kb) (HEAD) [Y/n/?] y Enable -c, -q, and -v (FEATURE_FANCY_HEAD) [Y/n] y hostid (286 bytes) (HOSTID) [Y/n/?] y id (7 kb) (ID) [Y/n/?] y groups (6.7 kb) (GROUPS) [N/y/?] n install (12 kb) (INSTALL) [Y/n/?] y Enable long options (FEATURE_INSTALL_LONG_OPTIONS) [Y/n] y link (3.2 kb) (LINK) [Y/n/?] y ln (4.9 kb) (LN) [Y/n/?] y logname (1.1 kb) (LOGNAME) [Y/n/?] y ls (14 kb) (LS) [Y/n/?] y Enable filetyping options (-p and -F) (FEATURE_LS_FILETYPES) [Y/n] y Enable symlinks dereferencing (-L) (FEATURE_LS_FOLLOWLINKS) [Y/n] y Enable recursion (-R) (FEATURE_LS_RECURSIVE) [Y/n] y Enable -w WIDTH and window size autodetection (FEATURE_LS_WIDTH) [Y/n] y Sort the file names (FEATURE_LS_SORTFILES) [Y/n/?] y Show file timestamps (FEATURE_LS_TIMESTAMPS) [Y/n/?] y Show username/groupnames (FEATURE_LS_USERNAME) [Y/n/?] y Allow use of color to identify file types (FEATURE_LS_COLOR) [Y/n/?] y Produce colored ls output by default (FEATURE_LS_COLOR_IS_DEFAULT) [Y/n/?] y md5sum (6.5 kb) (MD5SUM) [Y/n/?] y sha1sum (5.9 kb) (SHA1SUM) [Y/n/?] y sha256sum (7 kb) (SHA256SUM) [Y/n/?] y sha512sum (7.4 kb) (SHA512SUM) [Y/n/?] y sha3sum (6.1 kb) (SHA3SUM) [Y/n/?] y * * Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum * Enable -c, -s and -w options (FEATURE_MD5_SHA1_SUM_CHECK) [Y/n/?] y mkdir (4.5 kb) (MKDIR) [Y/n/?] y mkfifo (3.8 kb) (MKFIFO) [Y/n/?] y mknod (4.5 kb) (MKNOD) [Y/n/?] y mktemp (4.2 kb) (MKTEMP) [Y/n/?] y mv (10 kb) (MV) [Y/n/?] y nice (2.1 kb) (NICE) [Y/n/?] y nl (4.6 kb) (NL) [Y/n/?] y nohup (2 kb) (NOHUP) [Y/n/?] y nproc (3.7 kb) (NPROC) [Y/n/?] y od (11 kb) (OD) [Y/n/?] y paste (4.9 kb) (PASTE) [Y/n/?] y printenv (1.3 kb) (PRINTENV) [Y/n/?] y printf (3.8 kb) (PRINTF) [Y/n/?] y pwd (3.7 kb) (PWD) [Y/n/?] y readlink (4 kb) (READLINK) [Y/n/?] y Enable canonicalization by following all symlinks (-f) (FEATURE_READLINK_FOLLOW) [Y/n/?] y realpath (1.6 kb) (REALPATH) [Y/n/?] y rm (5.4 kb) (RM) [Y/n/?] y rmdir (3.5 kb) (RMDIR) [Y/n/?] y seq (3.8 kb) (SEQ) [Y/n/?] y shred (4.9 kb) (SHRED) [Y/n/?] y shuf (5.4 kb) (SHUF) [N/y/?] n sleep (2 kb) (SLEEP) [Y/?] y Enable multiple arguments and s/m/h/d suffixes (FEATURE_FANCY_SLEEP) [Y/n/?] y sort (7.7 kb) (SORT) [Y/n/?] y Full SuSv3 compliant sort (support -ktcbdfiogM) (FEATURE_SORT_BIG) [Y/n/?] y Use less memory (but might be slower) (FEATURE_SORT_OPTIMIZE_MEMORY) [N/y/?] (NEW) split (5 kb) (SPLIT) [N/y/?] n stat (11 kb) (STAT) [N/y/?] n stty (8.9 kb) (STTY) [Y/n/?] y sum (4 kb) (SUM) [N/y/?] n sync (3.8 kb) (SYNC) [Y/n/?] y Enable -d and -f flags (requires syncfs(2) in libc) (FEATURE_SYNC_FANCY) [N/y/?] n tac (3.9 kb) (TAC) [N/y/?] n tail (6.8 kb) (TAIL) [Y/n/?] y Enable -q, -s, -v, and -F options (FEATURE_FANCY_TAIL) [Y/n/?] y tee (4.2 kb) (TEE) [Y/n/?] y Enable block I/O (larger/faster) instead of byte I/O (FEATURE_TEE_USE_BLOCK_IO) [Y/n/?] y test (4.1 kb) (TEST) [Y/n/?] y test as [ (TEST1) [Y/n/?] y test as [[ (TEST2) [Y/n/?] y Extend test to 64 bit (FEATURE_TEST_64) [Y/n/?] y timeout (6 kb) (TIMEOUT) [N/y/?] n touch (5.9 kb) (TOUCH) [Y/n/?] y Add support for -h (FEATURE_TOUCH_NODEREF) [N/y/?] n Add support for SUSV3 features (-d -t -r) (FEATURE_TOUCH_SUSV3) [Y/n/?] y tr (5.1 kb) (TR) [Y/n/?] y Enable character classes (such as [:upper:]) (FEATURE_TR_CLASSES) [Y/n/?] y Enable equivalence classes (FEATURE_TR_EQUIV) [Y/n/?] y true (tiny) (TRUE) [Y/n/?] y truncate (4.2 kb) (TRUNCATE) [Y/n/?] y tty (3.6 kb) (TTY) [Y/n/?] y uname (3.9 kb) (UNAME) [Y/n/?] y Operating system name (UNAME_OSNAME) [GNU/Linux] GNU/Linux arch (1.1 kb) (BB_ARCH) [Y/n/?] y uniq (4.9 kb) (UNIQ) [Y/n/?] y unlink (3.2 kb) (UNLINK) [Y/n/?] y usleep (1.3 kb) (USLEEP) [Y/n/?] y uudecode (5.8 kb) (UUDECODE) [Y/n/?] y base64 (4.9 kb) (BASE64) [N/y/?] n uuencode (4.4 kb) (UUENCODE) [Y/n/?] y wc (4.5 kb) (WC) [Y/n/?] y Support very large counts (FEATURE_WC_LARGE) [N/y/?] n who (3.9 kb) (WHO) [Y/n/?] y w (3.8 kb) (W) [Y/n/?] y users (3.4 kb) (USERS) [N/y/?] n whoami (3.2 kb) (WHOAMI) [Y/n/?] y yes (1.2 kb) (YES) [Y/n/?] y * * Common options * Support verbose options (usually -v) for various applets (FEATURE_VERBOSE) [Y/n/?] y * * Common options for cp and mv * Preserve hard links (FEATURE_PRESERVE_HARDLINKS) [Y/n/?] y * * Common options for df, du, ls * Support human readable output (example 13k, 23M, 235G) (FEATURE_HUMAN_READABLE) [Y/n/?] y * * Console Utilities * chvt (2 kb) (CHVT) [Y/n/?] y clear (tiny) (CLEAR) [Y/n/?] y deallocvt (1.9 kb) (DEALLOCVT) [Y/n/?] y dumpkmap (1.6 kb) (DUMPKMAP) [Y/n/?] y fgconsole (1.5 kb) (FGCONSOLE) [N/y/?] n kbd_mode (4.1 kb) (KBD_MODE) [N/y/?] n loadfont (5.2 kb) (LOADFONT) [Y/n/?] y setfont (24 kb) (SETFONT) [N/y/?] n * * Common options for loadfont and setfont * Support PSF2 console fonts (FEATURE_LOADFONT_PSF2) [Y/n] y Support old (raw) console fonts (FEATURE_LOADFONT_RAW) [Y/n] y loadkmap (1.8 kb) (LOADKMAP) [Y/n/?] y openvt (7.2 kb) (OPENVT) [Y/n/?] y reset (345 bytes) (RESET) [Y/n/?] y resize (903 bytes) (RESIZE) [Y/n/?] y Print environment variables (FEATURE_RESIZE_PRINT) [Y/n/?] y setconsole (3.6 kb) (SETCONSOLE) [Y/n/?] y Enable long options (FEATURE_SETCONSOLE_LONG_OPTIONS) [N/y] n setkeycodes (2.1 kb) (SETKEYCODES) [Y/n/?] y setlogcons (1.8 kb) (SETLOGCONS) [Y/n/?] y showkey (4.7 kb) (SHOWKEY) [N/y/?] n * * Debian Utilities * pipe_progress (275 bytes) (PIPE_PROGRESS) [Y/n/?] y run-parts (6.1 kb) (RUN_PARTS) [Y/n/?] y Enable long options (FEATURE_RUN_PARTS_LONG_OPTIONS) [Y/n] y Support additional arguments (FEATURE_RUN_PARTS_FANCY) [N/y/?] n start-stop-daemon (12 kb) (START_STOP_DAEMON) [Y/n/?] y Enable long options (FEATURE_START_STOP_DAEMON_LONG_OPTIONS) [Y/n] y Support additional arguments (FEATURE_START_STOP_DAEMON_FANCY) [Y/n/?] y which (3.8 kb) (WHICH) [Y/n/?] y * * klibc-utils * minips (11 kb) (MINIPS) [N/y/?] n nuke (2.9 kb) (NUKE) [Y/n/?] y resume (3.2 kb) (RESUME) [Y/n/?] y run-init (7.7 kb) (RUN_INIT) [Y/n/?] y * * Editors * awk (23 kb) (AWK) [Y/n/?] y Enable math functions (requires libm) (FEATURE_AWK_LIBM) [N/y/?] n Enable a few GNU extensions (FEATURE_AWK_GNU_EXTENSIONS) [Y/n/?] y cmp (4.9 kb) (CMP) [Y/n/?] y diff (13 kb) (DIFF) [Y/n/?] y Enable long options (FEATURE_DIFF_LONG_OPTIONS) [N/y] n Enable directory support (FEATURE_DIFF_DIR) [Y/n/?] y ed (21 kb) (ED) [N/y/?] n patch (9.4 kb) (PATCH) [Y/n/?] y sed (12 kb) (SED) [Y/n/?] y vi (23 kb) (VI) [Y/n/?] y Maximum screen width (FEATURE_VI_MAX_LEN) [4096] 4096 Allow to display 8-bit chars (otherwise shows dots) (FEATURE_VI_8BIT) [Y/n/?] y Enable ":" colon commands (no "ex" mode) (FEATURE_VI_COLON) [Y/n/?] y Enable yank/put commands and mark cmds (FEATURE_VI_YANKMARK) [Y/n/?] y Enable search and replace cmds (FEATURE_VI_SEARCH) [Y/n/?] y Enable regex in search and replace (FEATURE_VI_REGEX_SEARCH) [N/y/?] n Catch signals (FEATURE_VI_USE_SIGNALS) [Y/n/?] y Remember previous cmd and "." cmd (FEATURE_VI_DOT_CMD) [Y/n/?] y Enable -R option and "view" mode (FEATURE_VI_READONLY) [Y/n/?] y Enable settable options, ai ic showmatch (FEATURE_VI_SETOPTS) [Y/n/?] y Support :set (FEATURE_VI_SET) [Y/n] y Handle window resize (FEATURE_VI_WIN_RESIZE) [Y/n/?] y Use 'tell me cursor position' ESC sequence to measure window (FEATURE_VI_ASK_TERMINAL) [Y/n/?] y Support undo command "u" (FEATURE_VI_UNDO) [Y/n/?] y Enable undo operation queuing (FEATURE_VI_UNDO_QUEUE) [Y/n/?] y Maximum undo character queue size (FEATURE_VI_UNDO_QUEUE_MAX) [256] 256 Allow vi and awk to execute shell commands (FEATURE_ALLOW_EXEC) [Y/n/?] y * * Finding Utilities * find (14 kb) (FIND) [Y/n/?] y Enable -print0: NUL-terminated output (FEATURE_FIND_PRINT0) [Y/n/?] y Enable -mtime: modified time matching (FEATURE_FIND_MTIME) [Y/n/?] y Enable -mmin: modified time matching by minutes (FEATURE_FIND_MMIN) [Y/n/?] y Enable -perm: permissions matching (FEATURE_FIND_PERM) [Y/n] y Enable -type: file type matching (file/dir/link/...) (FEATURE_FIND_TYPE) [Y/n/?] y Enable -executable: file is executable (FEATURE_FIND_EXECUTABLE) [Y/n] (NEW) Enable -xdev: 'stay in filesystem' (FEATURE_FIND_XDEV) [Y/n] y Enable -mindepth N and -maxdepth N (FEATURE_FIND_MAXDEPTH) [Y/n] y Enable -newer: compare file modification times (FEATURE_FIND_NEWER) [Y/n/?] y Enable -inum: inode number matching (FEATURE_FIND_INUM) [N/y] n Enable -exec: execute commands (FEATURE_FIND_EXEC) [Y/n/?] y Enable -exec ... {} + (FEATURE_FIND_EXEC_PLUS) [Y/n/?] y Enable -user: username/uid matching (FEATURE_FIND_USER) [Y/n] y Enable -group: group/gid matching (FEATURE_FIND_GROUP) [Y/n] y Enable the 'not' (!) operator (FEATURE_FIND_NOT) [Y/n/?] y Enable -depth (FEATURE_FIND_DEPTH) [Y/n/?] y Enable parens in options (FEATURE_FIND_PAREN) [Y/n/?] y Enable -size: file size matching (FEATURE_FIND_SIZE) [Y/n] y Enable -prune: exclude subdirectories (FEATURE_FIND_PRUNE) [Y/n/?] y Enable -quit: exit (FEATURE_FIND_QUIT) [Y/n/?] (NEW) Enable -delete: delete files/dirs (FEATURE_FIND_DELETE) [N/y/?] n Enable -path: match pathname with shell pattern (FEATURE_FIND_PATH) [Y/n/?] y Enable -regex: match pathname with regex (FEATURE_FIND_REGEX) [Y/n/?] y Enable -links: link count matching (FEATURE_FIND_LINKS) [N/y/?] n grep (8.6 kb) (GREP) [Y/n/?] y egrep (7.8 kb) (EGREP) [Y/n/?] y fgrep (7.8 kb) (FGREP) [Y/n/?] y Enable before and after context flags (-A, -B and -C) (FEATURE_GREP_CONTEXT) [Y/n/?] y xargs (7.2 kb) (XARGS) [Y/n/?] y Enable -p: prompt and confirmation (FEATURE_XARGS_SUPPORT_CONFIRMATION) [N/y/?] n Enable single and double quotes and backslash (FEATURE_XARGS_SUPPORT_QUOTES) [Y/n/?] y Enable -x: exit if -s or -n is exceeded (FEATURE_XARGS_SUPPORT_TERMOPT) [Y/n/?] y Enable -0: NUL-terminated input (FEATURE_XARGS_SUPPORT_ZERO_TERM) [Y/n/?] y Enable -I STR: string to replace (FEATURE_XARGS_SUPPORT_REPL_STR) [Y/n/?] y Enable -P N: processes to run in parallel (FEATURE_XARGS_SUPPORT_PARALLEL) [Y/n] y Enable -a FILE: use FILE instead of stdin (FEATURE_XARGS_SUPPORT_ARGS_FILE) [Y/n] y * * Init Utilities * bootchartd (10 kb) (BOOTCHARTD) [N/y/?] n halt (4 kb) (HALT) [Y/n/?] y poweroff (4 kb) (POWEROFF) [Y/n/?] y reboot (4 kb) (REBOOT) [Y/n/?] y Before signaling init, make sure it is ready for it (FEATURE_WAIT_FOR_INIT) [Y/n/?] (NEW) init (10 kb) (INIT) [Y/n/?] y linuxrc: support running init from initrd (not initramfs) (LINUXRC) [Y/n/?] y Support reading an inittab file (FEATURE_USE_INITTAB) [Y/n/?] y Support killing processes that have been removed from inittab (FEATURE_KILL_REMOVED) [Y/n/?] y How long to wait between TERM and KILL (0 - send TERM only) (FEATURE_KILL_DELAY) [0] 0 Run commands with leading dash with controlling tty (FEATURE_INIT_SCTTY) [Y/n/?] y Enable init to write to syslog (FEATURE_INIT_SYSLOG) [Y/n/?] y Be quiet on boot (no 'init started:' message) (FEATURE_INIT_QUIET) [Y/n] y Support dumping core for child processes (debugging only) (FEATURE_INIT_COREDUMPS) [N/y/?] n Initial terminal type (INIT_TERMINAL_TYPE) [linux] linux Clear init's command line (FEATURE_INIT_MODIFY_CMDLINE) [Y/n/?] y * * Login/Password Management Utilities * Support shadow passwords (FEATURE_SHADOWPASSWDS) [Y/n/?] y Use internal password and group functions rather than system functions (USE_BB_PWD_GRP) [N/y/?] n Use internal crypt functions (USE_BB_CRYPT) [Y/n/?] y Enable SHA256/512 crypt functions (USE_BB_CRYPT_SHA) [N/y/?] n add-shell (3.1 kb) (ADD_SHELL) [N/y/?] n remove-shell (3 kb) (REMOVE_SHELL) [N/y/?] n addgroup (8.6 kb) (ADDGROUP) [Y/n/?] y Support adding users to groups (FEATURE_ADDUSER_TO_GROUP) [N/y/?] n adduser (15 kb) (ADDUSER) [Y/n/?] y Enable sanity check on user/group names in adduser and addgroup (FEATURE_CHECK_NAMES) [N/y/?] n Last valid uid or gid for adduser and addgroup (LAST_ID) [60000] 60000 First valid system uid or gid for adduser and addgroup (FIRST_SYSTEM_ID) [100] 100 Last valid system uid or gid for adduser and addgroup (LAST_SYSTEM_ID) [999] 999 chpasswd (18 kb) (CHPASSWD) [N/y/?] n Default encryption method (passwd -a, cryptpw -m, chpasswd -c ALG) (FEATURE_DEFAULT_PASSWD_ALGO) [md5] md5 cryptpw (14 kb) (CRYPTPW) [N/y/?] n mkpasswd (15 kb) (MKPASSWD) [Y/n/?] y deluser (9.1 kb) (DELUSER) [Y/n/?] y delgroup (6.4 kb) (DELGROUP) [Y/n/?] y Support removing users from groups (FEATURE_DEL_USER_FROM_GROUP) [N/y/?] n getty (10 kb) (GETTY) [Y/n/?] y login (24 kb) (LOGIN) [Y/n/?] y Run logged in session in a child process (LOGIN_SESSION_AS_CHILD) [N/y/?] n Support login scripts (LOGIN_SCRIPTS) [N/y/?] n Support /etc/nologin (FEATURE_NOLOGIN) [Y/n/?] y Support /etc/securetty (FEATURE_SECURETTY) [Y/n/?] y passwd (21 kb) (PASSWD) [Y/n/?] y Check new passwords for weakness (FEATURE_PASSWD_WEAK_CHECK) [Y/n/?] y su (19 kb) (SU) [Y/n/?] y Log to syslog all attempts to use su (FEATURE_SU_SYSLOG) [Y/n] y If user's shell is not in /etc/shells, disallow -s PROG (FEATURE_SU_CHECKS_SHELLS) [Y/n] y Allow blank passwords only on TTYs in /etc/securetty (FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY) [N/y] n sulogin (17 kb) (SULOGIN) [Y/n/?] y vlock (17 kb) (VLOCK) [Y/n/?] y * * Linux Ext2 FS Progs * chattr (3.8 kb) (CHATTR) [Y/n/?] y fsck (7.4 kb) (FSCK) [Y/n/?] y lsattr (5.5 kb) (LSATTR) [Y/n/?] y tune2fs (4.4 kb) (TUNE2FS) [N/y/?] n * * Linux Module Utilities * Simplified modutils (MODPROBE_SMALL) [N/y/?] n depmod (27 kb) (DEPMOD) [N/y/?] n insmod (22 kb) (INSMOD) [Y/n/?] y lsmod (1.9 kb) (LSMOD) [Y/n/?] y Pretty output (FEATURE_LSMOD_PRETTY_2_6_OUTPUT) [Y/n/?] y modinfo (24 kb) (MODINFO) [N/y/?] n modprobe (28 kb) (MODPROBE) [Y/n/?] y Blacklist support (FEATURE_MODPROBE_BLACKLIST) [N/y/?] n rmmod (3.3 kb) (RMMOD) [Y/n/?] y * * Options common to multiple modutils * Accept module options on modprobe command line (FEATURE_CMDLINE_MODULE_OPTIONS) [Y/n/?] y Support version 2.2/2.4 Linux kernels (FEATURE_2_4_MODULES) [N/y/?] n Support tainted module checking with new kernels (FEATURE_CHECK_TAINTED_MODULE) [Y/n/?] y Try to load module from a mmap'ed area (FEATURE_INSMOD_TRY_MMAP) [N/y/?] n Support module.aliases file (FEATURE_MODUTILS_ALIAS) [Y/n/?] y Support module.symbols file (FEATURE_MODUTILS_SYMBOLS) [Y/n/?] y Default directory containing modules (DEFAULT_MODULES_DIR) [/lib/modules] /lib/modules Default name of modules.dep (DEFAULT_DEPMOD_FILE) [modules.dep] modules.dep * * Linux System Utilities * acpid (9 kb) (ACPID) [N/y/?] n blkdiscard (4.3 kb) (BLKDISCARD) [N/y/?] n blkid (12 kb) (BLKID) [Y/n/?] y Print filesystem type (FEATURE_BLKID_TYPE) [N/y/?] n blockdev (2.3 kb) (BLOCKDEV) [N/y/?] n cal (5.8 kb) (CAL) [N/y/?] n chrt (4.7 kb) (CHRT) [Y/n/?] y dmesg (3.7 kb) (DMESG) [Y/n/?] y Pretty output (FEATURE_DMESG_PRETTY) [Y/n/?] y eject (4 kb) (EJECT) [Y/n/?] y SCSI support (FEATURE_EJECT_SCSI) [N/y/?] n fallocate (4.1 kb) (FALLOCATE) [Y/n/?] y fatattr (1.9 kb) (FATATTR) [N/y/?] n fbset (5.9 kb) (FBSET) [Y/n/?] y Enable extra options (FEATURE_FBSET_FANCY) [Y/n/?] y Enable readmode support (FEATURE_FBSET_READMODE) [Y/n/?] y fdformat (4.4 kb) (FDFORMAT) [Y/n/?] y fdisk (37 kb) (FDISK) [Y/n/?] y Write support (FEATURE_FDISK_WRITABLE) [Y/n/?] y Support AIX disklabels (FEATURE_AIX_LABEL) [N/y/?] n Support SGI disklabels (FEATURE_SGI_LABEL) [N/y/?] n Support SUN disklabels (FEATURE_SUN_LABEL) [N/y/?] n Support BSD disklabels (FEATURE_OSF_LABEL) [N/y/?] n Support GPT disklabels (FEATURE_GPT_LABEL) [Y/n/?] y Support expert mode (FEATURE_FDISK_ADVANCED) [Y/n/?] y findfs (12 kb) (FINDFS) [N/y/?] n flock (6.3 kb) (FLOCK) [Y/n/?] y fdflush (1.3 kb) (FDFLUSH) [Y/n/?] y freeramdisk (1.3 kb) (FREERAMDISK) [Y/n/?] y fsck.minix (13 kb) (FSCK_MINIX) [N/y/?] n fsfreeze (3.5 kb) (FSFREEZE) [Y/n/?] y fstrim (4.4 kb) (FSTRIM) [Y/n/?] y getopt (5.8 kb) (GETOPT) [Y/n/?] y Support -l LONGOPTs (FEATURE_GETOPT_LONG) [Y/n/?] y hexdump (8.6 kb) (HEXDUMP) [Y/n/?] y Support -R, reverse of 'hexdump -Cv' (FEATURE_HEXDUMP_REVERSE) [N/y/?] n hd (7.8 kb) (HD) [N/y/?] n xxd (8.9 kb) (XXD) [Y/n/?] y hwclock (5.8 kb) (HWCLOCK) [Y/n/?] y Use FHS /var/lib/hwclock/adjtime (FEATURE_HWCLOCK_ADJTIME_FHS) [Y/n/?] y ionice (3.8 kb) (IONICE) [N/y/?] n ipcrm (3.2 kb) (IPCRM) [Y/n/?] y ipcs (11 kb) (IPCS) [Y/n/?] y last (6.1 kb) (LAST) [Y/n/?] y Output extra information (FEATURE_LAST_FANCY) [N/y/?] n losetup (5.5 kb) (LOSETUP) [Y/n/?] y lspci (6.3 kb) (LSPCI) [Y/n/?] y lsusb (4.2 kb) (LSUSB) [Y/n/?] y mdev (17 kb) (MDEV) [Y/n/?] y Support /etc/mdev.conf (FEATURE_MDEV_CONF) [Y/n/?] y Support subdirs/symlinks (FEATURE_MDEV_RENAME) [Y/n/?] y Support regular expressions substitutions when renaming device (FEATURE_MDEV_RENAME_REGEXP) [N/y/?] n Support command execution at device addition/removal (FEATURE_MDEV_EXEC) [Y/n/?] y Support loading of firmware (FEATURE_MDEV_LOAD_FIRMWARE) [N/y/?] n mesg (1.4 kb) (MESG) [Y/n/?] y Enable writing to tty only by group, not by everybody (FEATURE_MESG_ENABLE_ONLY_GROUP) [Y/n/?] y mke2fs (10 kb) (MKE2FS) [Y/n/?] y mkfs.ext2 (10 kb) (MKFS_EXT2) [N/y/?] n mkfs.minix (10 kb) (MKFS_MINIX) [N/y/?] n mkfs_reiser (MKFS_REISER) [N/y/?] n mkdosfs (7.2 kb) (MKDOSFS) [Y/n/?] y mkfs.vfat (7.2 kb) (MKFS_VFAT) [N/y/?] n mkswap (6.3 kb) (MKSWAP) [Y/n/?] y UUID support (FEATURE_MKSWAP_UUID) [N/y/?] n more (7 kb) (MORE) [Y/n/?] y mount (23 kb) (MOUNT) [Y/n/?] y Support -f (fake mount) (FEATURE_MOUNT_FAKE) [N/y/?] n Support -v (verbose) (FEATURE_MOUNT_VERBOSE) [N/y/?] n Support mount helpers (FEATURE_MOUNT_HELPERS) [N/y/?] n Support specifying devices by label or UUID (FEATURE_MOUNT_LABEL) [N/y/?] n Support mounting NFS file systems on Linux < 2.6.23 (FEATURE_MOUNT_NFS) [N/y/?] n Support mounting CIFS/SMB file systems (FEATURE_MOUNT_CIFS) [Y/n/?] y Support lots of -o flags (FEATURE_MOUNT_FLAGS) [Y/n/?] y Support /etc/fstab and -a (mount all) (FEATURE_MOUNT_FSTAB) [Y/n/?] y Support -T (FEATURE_MOUNT_OTHERTAB) [Y/n/?] y mountpoint (4.9 kb) (MOUNTPOINT) [Y/n/?] y nologin (NOLOGIN) [Y/n/?] (NEW) Enable dependencies for nologin (NOLOGIN_DEPENDENCIES) [Y/n/?] (NEW) nsenter (6.5 kb) (NSENTER) [N/y/?] n pivot_root (1.1 kb) (PIVOT_ROOT) [Y/n/?] y rdate (5.6 kb) (RDATE) [Y/n/?] y rdev (1.8 kb) (RDEV) [N/y/?] n readprofile (7.1 kb) (READPROFILE) [Y/n/?] y renice (4.2 kb) (RENICE) [Y/n/?] y rev (4.4 kb) (REV) [N/y/?] n rtcwake (6.8 kb) (RTCWAKE) [N/y/?] n script (8.6 kb) (SCRIPT) [N/y/?] n scriptreplay (2.4 kb) (SCRIPTREPLAY) [N/y/?] n setarch (3.6 kb) (SETARCH) [Y/n/?] y linux32 (3.3 kb) (LINUX32) [Y/n/?] y linux64 (3.3 kb) (LINUX64) [Y/n/?] y setpriv (6.6 kb) (SETPRIV) [Y/n/?] y Support dumping current privilege state (FEATURE_SETPRIV_DUMP) [Y/n/?] y Support capabilities (FEATURE_SETPRIV_CAPABILITIES) [Y/n/?] y Support capability names (FEATURE_SETPRIV_CAPABILITY_NAMES) [Y/n/?] y setsid (3.6 kb) (SETSID) [Y/n/?] y swapon (15 kb) (SWAPON) [Y/n/?] y Support discard option -d (FEATURE_SWAPON_DISCARD) [N/y/?] n Support priority option -p (FEATURE_SWAPON_PRI) [N/y/?] n swapoff (14 kb) (SWAPOFF) [Y/n] y Support specifying devices by label or UUID (FEATURE_SWAPONOFF_LABEL) [Y/n/?] y switch_root (5.5 kb) (SWITCH_ROOT) [Y/n/?] y taskset (4.2 kb) (TASKSET) [N/y/?] n uevent (3.1 kb) (UEVENT) [Y/n/?] y umount (5.1 kb) (UMOUNT) [Y/n/?] y Support -a (unmount all) (FEATURE_UMOUNT_ALL) [Y/n/?] y unshare (7.2 kb) (UNSHARE) [N/y/?] n wall (2.6 kb) (WALL) [N/y/?] n * * Common options for mount/umount * Support loopback mounts (FEATURE_MOUNT_LOOP) [Y/n/?] y Create new loopback devices if needed (FEATURE_MOUNT_LOOP_CREATE) [Y/n/?] y Support old /etc/mtab file (FEATURE_MTAB_SUPPORT) [N/y/?] n * * Filesystem/Volume identification * bcache filesystem (FEATURE_VOLUMEID_BCACHE) [N/y] n btrfs filesystem (FEATURE_VOLUMEID_BTRFS) [N/y] n cramfs filesystem (FEATURE_VOLUMEID_CRAMFS) [N/y] n exFAT filesystem (FEATURE_VOLUMEID_EXFAT) [Y/n/?] y Ext filesystem (FEATURE_VOLUMEID_EXT) [Y/n] y f2fs filesystem (FEATURE_VOLUMEID_F2FS) [Y/n/?] y fat filesystem (FEATURE_VOLUMEID_FAT) [Y/n] y hfs filesystem (FEATURE_VOLUMEID_HFS) [N/y] n iso9660 filesystem (FEATURE_VOLUMEID_ISO9660) [N/y] n jfs filesystem (FEATURE_VOLUMEID_JFS) [N/y] n linuxraid (FEATURE_VOLUMEID_LINUXRAID) [N/y] n linux swap filesystem (FEATURE_VOLUMEID_LINUXSWAP) [N/y] n luks filesystem (FEATURE_VOLUMEID_LUKS) [N/y] n minix filesystem (FEATURE_VOLUMEID_MINIX) [Y/n] y nilfs filesystem (FEATURE_VOLUMEID_NILFS) [N/y/?] n ntfs filesystem (FEATURE_VOLUMEID_NTFS) [N/y] n ocfs2 filesystem (FEATURE_VOLUMEID_OCFS2) [N/y] n Reiser filesystem (FEATURE_VOLUMEID_REISERFS) [N/y] n romfs filesystem (FEATURE_VOLUMEID_ROMFS) [N/y] n sysv filesystem (FEATURE_VOLUMEID_SYSV) [N/y] n UBIFS filesystem (FEATURE_VOLUMEID_UBIFS) [Y/n/?] y udf filesystem (FEATURE_VOLUMEID_UDF) [N/y] n xfs filesystem (FEATURE_VOLUMEID_XFS) [N/y] n * * Miscellaneous Utilities * adjtimex (4.7 kb) (ADJTIMEX) [N/y/?] n bbconfig (9.7 kb) (BBCONFIG) [N/y/?] n bc (45 kb) (BC) [Y/n/?] (NEW) dc (36 kb) (DC) [Y/n/?] y Use bc code base for dc (larger, more features) (FEATURE_DC_BIG) [Y] (NEW) y Interactive mode (+4kb) (FEATURE_BC_INTERACTIVE) [Y/n/?] (NEW) Enable bc/dc long options (FEATURE_BC_LONG_OPTIONS) [Y/n] (NEW) beep (2.4 kb) (BEEP) [N/y/?] n chat (6.3 kb) (CHAT) [N/y/?] n conspy (10 kb) (CONSPY) [N/y/?] n crond (14 kb) (CROND) [Y/n/?] y Support -d (redirect output to stderr) (FEATURE_CROND_D) [N/y/?] n Report command output via email (using sendmail) (FEATURE_CROND_CALL_SENDMAIL) [N/y/?] n Support special times (@reboot, @daily, etc) in crontabs (FEATURE_CROND_SPECIAL_TIMES) [Y/n/?] y crond spool directory (FEATURE_CROND_DIR) [/var/spool/cron] /var/spool/cron crontab (10 kb) (CRONTAB) [Y/n/?] y devfsd (obsolete) (DEVFSD) [N/y/?] n Use devfs names for all devices (obsolete) (FEATURE_DEVFS) [N/y/?] n devmem (2.5 kb) (DEVMEM) [Y/n/?] y fbsplash (26 kb) (FBSPLASH) [N/y/?] n flash_eraseall (5.9 kb) (FLASH_ERASEALL) [N/y/?] n flash_lock (2.1 kb) (FLASH_LOCK) [N/y/?] n flash_unlock (1.3 kb) (FLASH_UNLOCK) [N/y/?] n flashcp (5.3 kb) (FLASHCP) [N/y/?] n hdparm (25 kb) (HDPARM) [Y/n/?] y Support obtaining detailed information directly from drives (FEATURE_HDPARM_GET_IDENTITY) [Y/n/?] y Register an IDE interface (DANGEROUS) (FEATURE_HDPARM_HDIO_SCAN_HWIF) [N/y/?] n Un-register an IDE interface (DANGEROUS) (FEATURE_HDPARM_HDIO_UNREGISTER_HWIF) [N/y/?] n Perform device reset (DANGEROUS) (FEATURE_HDPARM_HDIO_DRIVE_RESET) [N/y/?] n Tristate device for hotswap (DANGEROUS) (FEATURE_HDPARM_HDIO_TRISTATE_HWIF) [N/y/?] n Get/set using_dma flag (FEATURE_HDPARM_HDIO_GETSET_DMA) [N/y/?] n hexedit (21 kb) (HEXEDIT) [Y/n/?] y i2cget (5.5 kb) (I2CGET) [Y/n/?] y i2cset (6.7 kb) (I2CSET) [Y/n/?] y i2cdump (7.1 kb) (I2CDUMP) [Y/n/?] y i2cdetect (7.1 kb) (I2CDETECT) [Y/n/?] y inotifyd (3.6 kb) (INOTIFYD) [N/y/?] n less (16 kb) (LESS) [Y/n/?] y Max number of input lines less will try to eat (FEATURE_LESS_MAXLINES) [9999999] 9999999 Enable bracket searching (FEATURE_LESS_BRACKETS) [Y/n/?] y Enable -m/-M (FEATURE_LESS_FLAGS) [Y/n/?] y Enable -S (FEATURE_LESS_TRUNCATE) [Y/n/?] y Enable marks (FEATURE_LESS_MARKS) [N/y/?] n Enable regular expressions (FEATURE_LESS_REGEXP) [Y/n/?] y Enable automatic resizing on window size changes (FEATURE_LESS_WINCH) [N/y/?] n Enable flag changes ('-' command) (FEATURE_LESS_DASHCMD) [N/y/?] n lsscsi (2.5 kb) (LSSCSI) [Y/n/?] y makedevs (9.2 kb) (MAKEDEVS) [Y/n/?] y Choose makedevs behaviour 1. leaf (FEATURE_MAKEDEVS_LEAF) > 2. table (FEATURE_MAKEDEVS_TABLE) choice[1-2]: 2 man (26 kb) (MAN) [N/y/?] n microcom (5.7 kb) (MICROCOM) [Y/n/?] y mt (2.5 kb) (MT) [Y/n/?] y nandwrite (4.8 kb) (NANDWRITE) [N/y/?] n nanddump (5.2 kb) (NANDDUMP) [N/y/?] n partprobe (3.5 kb) (PARTPROBE) [Y/n/?] y raidautorun (1.3 kb) (RAIDAUTORUN) [N/y/?] n readahead (1.5 kb) (READAHEAD) [N/y/?] n rfkill (4.4 kb) (RFKILL) [N/y/?] n runlevel (559 bytes) (RUNLEVEL) [Y/n/?] y rx (2.9 kb) (RX) [N/y/?] n setfattr (3.7 kb) (SETFATTR) [Y/n/?] y setserial (6.9 kb) (SETSERIAL) [Y/n/?] y strings (4.6 kb) (STRINGS) [Y/n/?] y time (6.8 kb) (TIME) [Y/n/?] y ttysize (432 bytes) (TTYSIZE) [N/y/?] n ubiattach (4.2 kb) (UBIATTACH) [N/y/?] n ubidetach (4.1 kb) (UBIDETACH) [N/y/?] n ubimkvol (5.3 kb) (UBIMKVOL) [N/y/?] n ubirmvol (4.9 kb) (UBIRMVOL) [N/y/?] n ubirsvol (4.2 kb) (UBIRSVOL) [N/y/?] n ubiupdatevol (5.2 kb) (UBIUPDATEVOL) [N/y/?] n ubirename (2.4 kb) (UBIRENAME) [Y/n/?] y volname (1.6 kb) (VOLNAME) [N/y/?] n watchdog (5.3 kb) (WATCHDOG) [Y/n/?] y * * Networking Utilities * Enable IPv6 support (FEATURE_IPV6) [Y/n/?] y Enable Unix domain socket support (usually not needed) (FEATURE_UNIX_LOCAL) [N/y/?] n Prefer IPv4 addresses from DNS queries (FEATURE_PREFER_IPV4_ADDRESS) [Y/n/?] y Verbose resolution errors (VERBOSE_RESOLUTION_ERRORS) [N/y/?] n arp (10 kb) (ARP) [Y/n/?] y arping (9 kb) (ARPING) [Y/n/?] y brctl (4.7 kb) (BRCTL) [N/y/?] n dnsd (9.8 kb) (DNSD) [Y/n/?] y ether-wake (4.9 kb) (ETHER_WAKE) [Y/n/?] y ftpd (30 kb) (FTPD) [N/y/?] n ftpget (7.8 kb) (FTPGET) [N/y/?] n ftpput (7.5 kb) (FTPPUT) [N/y/?] n hostname (5.5 kb) (HOSTNAME) [Y/n/?] y dnsdomainname (3.6 kb) (DNSDOMAINNAME) [Y/n/?] y httpd (32 kb) (HTTPD) [N/y/?] n ifconfig (12 kb) (IFCONFIG) [Y/n/?] y Enable status reporting output (+7k) (FEATURE_IFCONFIG_STATUS) [Y/n/?] y Enable slip-specific options "keepalive" and "outfill" (FEATURE_IFCONFIG_SLIP) [Y/n/?] y Enable options "mem_start", "io_addr", and "irq" (FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ) [Y/n/?] y Enable option "hw" (ether only) (FEATURE_IFCONFIG_HW) [Y/n/?] y Set the broadcast automatically (FEATURE_IFCONFIG_BROADCAST_PLUS) [N/y/?] n ifenslave (13 kb) (IFENSLAVE) [N/y/?] n ifplugd (10 kb) (IFPLUGD) [N/y/?] n ifup (14 kb) (IFUP) [Y/n/?] y ifdown (13 kb) (IFDOWN) [Y/n/?] y Absolute path to ifstate file (IFUPDOWN_IFSTATE_PATH) [/var/run/ifstate] /var/run/ifstate Use ip tool (else ifconfig/route is used) (FEATURE_IFUPDOWN_IP) [Y/n/?] y Support IPv4 (FEATURE_IFUPDOWN_IPV4) [Y/n/?] y Support IPv6 (FEATURE_IFUPDOWN_IPV6) [Y/n/?] y Enable mapping support (FEATURE_IFUPDOWN_MAPPING) [Y/n/?] y Support external DHCP clients (FEATURE_IFUPDOWN_EXTERNAL_DHCP) [N/y/?] n inetd (18 kb) (INETD) [Y/n/?] y Support echo service on port 7 (FEATURE_INETD_SUPPORT_BUILTIN_ECHO) [Y/n/?] y Support discard service on port 8 (FEATURE_INETD_SUPPORT_BUILTIN_DISCARD) [Y/n/?] y Support time service on port 37 (FEATURE_INETD_SUPPORT_BUILTIN_TIME) [Y/n/?] y Support daytime service on port 13 (FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME) [Y/n/?] y Support chargen service on port 19 (FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN) [Y/n/?] y Support RPC services (FEATURE_INETD_RPC) [N/y/?] n ip (35 kb) (IP) [Y/n/?] y ipaddr (14 kb) (IPADDR) [Y/n/?] y iplink (17 kb) (IPLINK) [Y/n/?] y iproute (15 kb) (IPROUTE) [Y/n/?] y iptunnel (9.6 kb) (IPTUNNEL) [Y/n/?] y iprule (10 kb) (IPRULE) [Y/n/?] y ipneigh (8.3 kb) (IPNEIGH) [Y/n/?] y ip address (FEATURE_IP_ADDRESS) [Y/?] y ip link (FEATURE_IP_LINK) [Y/?] y ip route (FEATURE_IP_ROUTE) [Y/?] y ip route configuration directory (FEATURE_IP_ROUTE_DIR) [/etc/iproute2] /etc/iproute2 ip tunnel (FEATURE_IP_TUNNEL) [Y/?] y ip rule (FEATURE_IP_RULE) [Y/?] y ip neighbor (FEATURE_IP_NEIGH) [Y/?] y Support displaying rarely used link types (FEATURE_IP_RARE_PROTOCOLS) [N/y/?] n ipcalc (4.4 kb) (IPCALC) [N/y/?] n fakeidentd (8.7 kb) (FAKEIDENTD) [N/y/?] n nameif (6.6 kb) (NAMEIF) [Y/n/?] y Extended nameif (FEATURE_NAMEIF_EXTENDED) [N/y/?] n nbd-client (6 kb) (NBDCLIENT) [N/y/?] n nc (11 kb) (NC) [N/y/?] n netcat (11 kb) (NETCAT) [N/y/?] n netstat (10 kb) (NETSTAT) [Y/n/?] y Enable wide output (FEATURE_NETSTAT_WIDE) [N/y/?] n Enable PID/Program name output (FEATURE_NETSTAT_PRG) [N/y/?] n nslookup (9.7 kb) (NSLOOKUP) [Y/n/?] y Use internal resolver code instead of libc (FEATURE_NSLOOKUP_BIG) [Y/n] (NEW) Enable long options (FEATURE_NSLOOKUP_LONG_OPTIONS) [Y/n] (NEW) ntpd (22 kb) (NTPD) [N/y/?] n ping (10 kb) (PING) [Y/n/?] y ping6 (11 kb) (PING6) [N/y/?] n Enable fancy ping output (FEATURE_FANCY_PING) [Y/n/?] y pscan (6 kb) (PSCAN) [N/y/?] n route (8.7 kb) (ROUTE) [Y/n/?] y slattach (6.2 kb) (SLATTACH) [N/y/?] n ssl_client (25 kb) (SSL_CLIENT) [N/y/?] n tc (8.3 kb) (TC) [Y/n/?] (NEW) Enable ingress (FEATURE_TC_INGRESS) [Y/n] (NEW) tcpsvd (14 kb) (TCPSVD) [N/y/?] n udpsvd (13 kb) (UDPSVD) [N/y/?] n telnet (8.8 kb) (TELNET) [Y/n/?] y Pass TERM type to remote host (FEATURE_TELNET_TTYPE) [Y/n/?] y Pass USER type to remote host (FEATURE_TELNET_AUTOLOGIN) [Y/n/?] y Enable window size autodetection (FEATURE_TELNET_WIDTH) [Y/n] y telnetd (12 kb) (TELNETD) [N/y/?] n tftp (11 kb) (TFTP) [Y/n/?] y Enable progress bar (FEATURE_TFTP_PROGRESS_BAR) [N/y] n tftpd (10 kb) (TFTPD) [N/y/?] n Enable 'tftp get' and/or tftpd upload code (FEATURE_TFTP_GET) [Y/n/?] y Enable 'tftp put' and/or tftpd download code (FEATURE_TFTP_PUT) [Y/n/?] y Enable 'blksize' and 'tsize' protocol options (FEATURE_TFTP_BLOCKSIZE) [Y/n/?] y Enable debug (TFTP_DEBUG) [N/y/?] n traceroute (11 kb) (TRACEROUTE) [Y/n/?] y traceroute6 (13 kb) (TRACEROUTE6) [N/y/?] n Enable verbose output (FEATURE_TRACEROUTE_VERBOSE) [N/y/?] n Enable -I option (use ICMP instead of UDP) (FEATURE_TRACEROUTE_USE_ICMP) [N/y] n tunctl (6.2 kb) (TUNCTL) [N/y/?] n vconfig (2.3 kb) (VCONFIG) [Y/n/?] y wget (38 kb) (WGET) [Y/n/?] y Enable long options (FEATURE_WGET_LONG_OPTIONS) [Y/n] y Enable progress bar (+2k) (FEATURE_WGET_STATUSBAR) [Y/n] y Enable HTTP authentication (FEATURE_WGET_AUTHENTICATION) [Y/n/?] y Enable timeout option -T SEC (FEATURE_WGET_TIMEOUT) [Y/n/?] y Support HTTPS using internal TLS code (FEATURE_WGET_HTTPS) [N/y/?] n Try to connect to HTTPS using openssl (FEATURE_WGET_OPENSSL) [N/y/?] n whois (6.3 kb) (WHOIS) [N/y/?] n zcip (8.4 kb) (ZCIP) [N/y/?] n udhcpd (21 kb) (UDHCPD) [N/y/?] n dumpleases (5.1 kb) (DUMPLEASES) [N/y/?] n dhcprelay (5.2 kb) (DHCPRELAY) [N/y/?] n udhcpc (24 kb) (UDHCPC) [Y/n/?] y Verify that the offered address is free, using ARP ping (FEATURE_UDHCPC_ARPING) [Y/n/?] y Do not pass malformed host and domain names (FEATURE_UDHCPC_SANITIZEOPT) [Y/n/?] y Absolute path to config script (UDHCPC_DEFAULT_SCRIPT) [/usr/share/udhcpc/default.script] /usr/share/udhcpc/default.script udhcpc6 (21 kb) (UDHCPC6) [N/y/?] n * * Common options for DHCP applets * Enable '-P port' option for udhcpd and udhcpc (FEATURE_UDHCP_PORT) [N/y/?] n Maximum verbosity level (0..9) (UDHCP_DEBUG) [0] 0 DHCP options slack buffer size (UDHCPC_SLACK_FOR_BUGGY_SERVERS) [80] 80 Support RFC 3397 domain search options (FEATURE_UDHCP_RFC3397) [N/y/?] n Support 802.1Q VLAN parameters options (FEATURE_UDHCP_8021Q) [Y/n/?] y ifup udhcpc command line options (IFUPDOWN_UDHCPC_CMD_OPTIONS) [-R -n] -R -n * * Print Utilities * lpd (5.5 kb) (LPD) [N/y/?] n lpr (9.9 kb) (LPR) [N/y/?] n lpq (9.9 kb) (LPQ) [N/y/?] n * * Mail Utilities * makemime (5.4 kb) (MAKEMIME) [N/y/?] n popmaildir (10 kb) (POPMAILDIR) [N/y/?] n reformime (7.5 kb) (REFORMIME) [N/y/?] n sendmail (14 kb) (SENDMAIL) [N/y/?] n * * Process Utilities * free (3.1 kb) (FREE) [Y/n/?] y fuser (7 kb) (FUSER) [Y/n/?] y iostat (7.6 kb) (IOSTAT) [N/y/?] n kill (3.1 kb) (KILL) [Y/n/?] y killall (5.6 kb) (KILLALL) [Y/n/?] y killall5 (5.3 kb) (KILLALL5) [Y/n/?] y lsof (3.4 kb) (LSOF) [Y/n/?] y mpstat (9.8 kb) (MPSTAT) [N/y/?] n nmeter (11 kb) (NMETER) [N/y/?] n pgrep (6.5 kb) (PGREP) [N/y/?] n pkill (7.5 kb) (PKILL) [N/y/?] n pidof (6.3 kb) (PIDOF) [Y/n/?] y Enable single shot (-s) (FEATURE_PIDOF_SINGLE) [Y/n/?] y Enable omitting pids (-o PID) (FEATURE_PIDOF_OMIT) [Y/n/?] y pmap (6 kb) (PMAP) [N/y/?] n powertop (9.6 kb) (POWERTOP) [N/y/?] n ps (11 kb) (PS) [Y/n/?] y Enable -o time and -o etime specifiers (FEATURE_PS_TIME) [N/y] n Enable -o rgroup, -o ruser, -o nice specifiers (FEATURE_PS_ADDITIONAL_COLUMNS) [N/y] n pstree (9.3 kb) (PSTREE) [N/y/?] n pwdx (3.7 kb) (PWDX) [N/y/?] n smemcap (2.5 kb) (SMEMCAP) [N/y/?] n sysctl (7.4 kb) (BB_SYSCTL) [Y/n/?] y top (18 kb) (TOP) [Y/n/?] y Accept keyboard commands (FEATURE_TOP_INTERACTIVE) [Y/n/?] y Show CPU per-process usage percentage (FEATURE_TOP_CPU_USAGE_PERCENTAGE) [Y/n/?] y Show CPU global usage percentage (FEATURE_TOP_CPU_GLOBAL_PERCENTS) [Y/n/?] y SMP CPU usage display ('c' key) (FEATURE_TOP_SMP_CPU) [N/y/?] n Show 1/10th of a percent in CPU/mem statistics (FEATURE_TOP_DECIMALS) [N/y/?] n Show CPU process runs on ('j' field) (FEATURE_TOP_SMP_PROCESS) [N/y/?] n Topmem command ('s' key) (FEATURE_TOPMEM) [N/y/?] n uptime (3.7 kb) (UPTIME) [Y/n/?] y Show the number of users (FEATURE_UPTIME_UTMP_SUPPORT) [N/y/?] n watch (4.4 kb) (WATCH) [Y/n/?] y Support thread display in ps/pstree/top (FEATURE_SHOW_THREADS) [N/y/?] n * * Runit Utilities * chpst (9 kb) (CHPST) [N/y/?] n setuidgid (4 kb) (SETUIDGID) [N/y/?] n envuidgid (3.9 kb) (ENVUIDGID) [N/y/?] n envdir (2.5 kb) (ENVDIR) [N/y/?] n softlimit (4.5 kb) (SOFTLIMIT) [N/y/?] n runsv (7.8 kb) (RUNSV) [N/y/?] n runsvdir (6.3 kb) (RUNSVDIR) [N/y/?] n sv (8.5 kb) (SV) [N/y/?] n Default directory for services (SV_DEFAULT_SERVICE_DIR) [] svc (8.4 kb) (SVC) [Y/n/?] y svok (1.5 kb) (SVOK) [Y/n/?] (NEW) svlogd (16 kb) (SVLOGD) [N/y/?] n * * Shells * Choose which shell is aliased to 'sh' name > 1. ash (SH_IS_ASH) 2. hush (SH_IS_HUSH) 3. none (SH_IS_NONE) choice[1-3?]: 1 Choose which shell is aliased to 'bash' name 1. ash (BASH_IS_ASH) 2. hush (BASH_IS_HUSH) > 3. none (BASH_IS_NONE) choice[1-3?]: 3 ash (78 kb) (ASH) [Y/n/?] y Optimize for size instead of speed (ASH_OPTIMIZE_FOR_SIZE) [Y/n] y Use internal glob() implementation (ASH_INTERNAL_GLOB) [Y/n/?] y bash-compatible extensions (ASH_BASH_COMPAT) [Y/n] y 'source' and '.' builtins search current directory after $PATH (ASH_BASH_SOURCE_CURDIR) [N/y/?] (NEW) command_not_found_handle hook support (ASH_BASH_NOT_FOUND_HOOK) [Y/n/?] (NEW) Job control (ASH_JOB_CONTROL) [Y/n] y Alias support (ASH_ALIAS) [Y/n] y Pseudorandom generator and $RANDOM variable (ASH_RANDOM_SUPPORT) [Y/n/?] y Expand prompt string (ASH_EXPAND_PRMT) [Y/n/?] y Idle timeout variable $TMOUT (ASH_IDLE_TIMEOUT) [Y/n/?] y Check for new mail in interactive shell (ASH_MAIL) [N/y/?] n echo builtin (ASH_ECHO) [Y/n] y printf builtin (ASH_PRINTF) [Y/n] y test builtin (ASH_TEST) [Y/n] y help builtin (ASH_HELP) [Y/n] y getopts builtin (ASH_GETOPTS) [Y/n] y command builtin (ASH_CMDCMD) [Y/n/?] y cttyhack (2.4 kb) (CTTYHACK) [N/y/?] n hush (68 kb) (HUSH) [N/y/?] n * * Options common to all shells * POSIX math support (FEATURE_SH_MATH) [Y/n/?] y Extend POSIX math support to 64 bit (FEATURE_SH_MATH_64) [Y/n/?] y Hide message on interactive shell startup (FEATURE_SH_EXTRA_QUIET) [Y/n/?] y Standalone shell (FEATURE_SH_STANDALONE) [N/y/?] n Run 'nofork' applets directly (FEATURE_SH_NOFORK) [N/y/?] n read -t N.NNN support (+110 bytes) (FEATURE_SH_READ_FRAC) [Y/n/?] y Use $HISTFILESIZE (FEATURE_SH_HISTFILESIZE) [N/y/?] n Embed scripts in the binary (FEATURE_SH_EMBEDDED_SCRIPTS) [Y/n/?] (NEW) * * System Logging Utilities * klogd (5.7 kb) (KLOGD) [Y/n/?] y Use the klogctl() interface (FEATURE_KLOGD_KLOGCTL) [Y/n/?] y logger (6.3 kb) (LOGGER) [Y/n/?] y logread (4.8 kb) (LOGREAD) [N/y/?] n syslogd (13 kb) (SYSLOGD) [Y/n/?] y Rotate message files (FEATURE_ROTATE_LOGFILE) [Y/n/?] y Remote Log support (FEATURE_REMOTE_LOG) [Y/n/?] y Support -D (drop dups) option (FEATURE_SYSLOGD_DUP) [N/y/?] n Support syslog.conf (FEATURE_SYSLOGD_CFG) [N/y/?] n Read buffer size in bytes (FEATURE_SYSLOGD_READ_BUFFER_SIZE) [256] 256 Circular Buffer support (FEATURE_IPC_SYSLOG) [N/y/?] n Linux kernel printk buffer support (FEATURE_KMSG_SYSLOG) [N/y/?] n make[1]: Leaving directory '/home/peko/autobuild/instance-0/output/build/busybox-1.30.1' yes: standard output: Broken pipe /bin/sed -i -e "/\\/d" /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config echo '# CONFIG_NOMMU is not set' >> /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config /bin/sed -i -e "/\\/d" /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config echo 'CONFIG_USE_BB_CRYPT_SHA=y' >> /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config /bin/sed -i -e "/\\/d" /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config echo 'CONFIG_PAM=y' >> /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config /bin/sed -i -e "/\\/d" /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config echo 'CONFIG_INIT=y' >> /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config /bin/sed -i -e "/\\/d" /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config echo 'CONFIG_WATCHDOG=y' >> /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config /bin/sed -i -e "/\\/d" /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config echo 'CONFIG_BUILD_LIBBUSYBOX=y' >> /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config /bin/sed -i -e "/\\/d" /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config echo 'CONFIG_FEATURE_INDIVIDUAL=y' >> /home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.config make[1]: Entering directory '/home/peko/autobuild/instance-0/output/build/busybox-1.30.1' scripts/kconfig/conf -o Config.in # # using defaults found in .config # * * Busybox Configuration * * * Settings * Enable compatibility for full-blown desktop systems (DESKTOP) [Y/n/?] y Provide compatible behavior for rare corner cases (bigger code) (EXTRA_COMPAT) [N/y/?] n Building for Fedora distribution (FEDORA_COMPAT) [N/y/?] n Enable obsolete features removed before SUSv3 (INCLUDE_SUSv2) [Y/n/?] y Support --long-options (LONG_OPTS) [Y/?] y Show applet usage messages (SHOW_USAGE) [Y/n/?] y Show verbose applet usage messages (FEATURE_VERBOSE_USAGE) [Y/n/?] y Store applet usage messages in compressed form (FEATURE_COMPRESS_USAGE) [N/y/?] n Support files > 2 GB (LFS) [Y/n/?] y Support PAM (Pluggable Authentication Modules) (PAM) [Y/n/?] y Use the devpts filesystem for Unix98 PTYs (FEATURE_DEVPTS) [Y/n/?] y Support utmp file (FEATURE_UTMP) [Y/n/?] y Support wtmp file (FEATURE_WTMP) [Y/n/?] y Support writing pidfiles (FEATURE_PIDFILE) [N/y/?] n Include busybox applet (BUSYBOX) [Y/n/?] y Support --show SCRIPT (FEATURE_SHOW_SCRIPT) [Y/n] y Support --install [-s] to install applet links at runtime (FEATURE_INSTALLER) [Y/n/?] y Don't use /usr (INSTALL_NO_USR) [N/y/?] n Drop SUID state for most applets (FEATURE_SUID) [Y/n/?] y Enable SUID configuration via /etc/busybox.conf (FEATURE_SUID_CONFIG) [N/y/?] n exec prefers applets (FEATURE_PREFER_APPLETS) [N/y/?] n Path to busybox executable (BUSYBOX_EXEC_PATH) [/proc/self/exe] /proc/self/exe Support NSA Security Enhanced Linux (SELINUX) [N/y/?] n Clean up all memory before exiting (usually not needed) (FEATURE_CLEAN_UP) [N/y/?] n * * Build Options * Build static binary (no shared libs) (STATIC) [N/y/?] n Build position independent executable (PIE) [N/y/?] n Force NOMMU build (NOMMU) [N/y/?] n Build shared libbusybox (BUILD_LIBBUSYBOX) [Y/n/?] y Pull in all external references into libbusybox (FEATURE_LIBBUSYBOX_STATIC) [N/y/?] n Produce a binary for each applet, linked against libbusybox (FEATURE_INDIVIDUAL) [Y/n/?] y Produce additional busybox binary linked against libbusybox (FEATURE_SHARED_BUSYBOX) [N/y/?] n Cross compiler prefix (CROSS_COMPILER_PREFIX) [] Path to sysroot (SYSROOT) [] Additional CFLAGS (EXTRA_CFLAGS) [] Additional LDFLAGS (EXTRA_LDFLAGS) [] Additional LDLIBS (EXTRA_LDLIBS) [] Avoid using GCC-specific code constructs (USE_PORTABLE_CODE) [N/y/?] n Use -mpreferred-stack-boundary=2 on i386 arch (STACK_OPTIMIZATION_386) [Y/n/?] y * * Installation Options ("make install" behavior) * What kind of applet links to install > 1. as soft-links (INSTALL_APPLET_SYMLINKS) 2. as hard-links (INSTALL_APPLET_HARDLINKS) 3. as script wrappers (INSTALL_APPLET_SCRIPT_WRAPPERS) 4. not installed (INSTALL_APPLET_DONT) choice[1-4?]: 1 Destination path for 'make install' (PREFIX) [./_install] ./_install * * Debugging Options * Build with debug information (DEBUG) [N/y/?] n Enable runtime sanitizers (ASAN/LSAN/USAN/etc...) (DEBUG_SANITIZE) [N/y/?] n Build unit tests (UNIT_TEST) [N/y/?] n Abort compilation on any warning (WERROR) [N/y/?] n Additional debugging library > 1. None (NO_DEBUG_LIB) 2. Dmalloc (DMALLOC) 3. Electric-fence (EFENCE) choice[1-3?]: 1 * * Library Tuning * Use the end of BSS page (FEATURE_USE_BSS_TAIL) [N/y/?] n Enable fractional duration arguments (FLOAT_DURATION) [Y/n/?] y Support RTMIN[+n] and RTMAX[-n] signal names (FEATURE_RTMINMAX) [Y/n/?] y Use the definitions of SIGRTMIN/SIGRTMAX provided by libc (FEATURE_RTMINMAX_USE_LIBC_DEFINITIONS) [Y/n/?] y Buffer allocation policy > 1. Allocate with Malloc (FEATURE_BUFFERS_USE_MALLOC) 2. Allocate on the Stack (FEATURE_BUFFERS_GO_ON_STACK) 3. Allocate in the .bss section (FEATURE_BUFFERS_GO_IN_BSS) choice[1-3?]: 1 Minimum password length (PASSWORD_MINLEN) [6] 6 MD5: Trade bytes for speed (0:fast, 3:slow) (MD5_SMALL) [1] 1 SHA3: Trade bytes for speed (0:fast, 1:slow) (SHA3_SMALL) [1] 1 Faster /proc scanning code (+100 bytes) (FEATURE_FAST_TOP) [N/y/?] n Support /etc/networks (FEATURE_ETC_NETWORKS) [N/y/?] n Consult /etc/services even for well-known ports (FEATURE_ETC_SERVICES) [N/y/?] n Command line editing (FEATURE_EDITING) [Y/n/?] y Maximum length of input (FEATURE_EDITING_MAX_LEN) [1024] 1024 vi-style line editing commands (FEATURE_EDITING_VI) [Y/n/?] y History size (FEATURE_EDITING_HISTORY) [999] 999 History saving (FEATURE_EDITING_SAVEHISTORY) [Y/n/?] y Save history on shell exit, not after every command (FEATURE_EDITING_SAVE_ON_EXIT) [N/y/?] n Reverse history search (FEATURE_REVERSE_SEARCH) [Y/n/?] y Tab completion (FEATURE_TAB_COMPLETION) [Y/n] y Username completion (FEATURE_USERNAME_COMPLETION) [N/y] n Fancy shell prompts (FEATURE_EDITING_FANCY_PROMPT) [Y/n/?] y Enable automatic tracking of window size changes (FEATURE_EDITING_WINCH) [Y/n] y Query cursor position from terminal (FEATURE_EDITING_ASK_TERMINAL) [N/y/?] n Enable locale support (system needs locale for this to work) (LOCALE_SUPPORT) [N/y/?] n Support Unicode (UNICODE_SUPPORT) [N/y/?] n Non-POSIX, but safer, copying to special nodes (FEATURE_NON_POSIX_CP) [Y/n/?] y Give more precise messages when copy fails (cp, mv etc) (FEATURE_VERBOSE_CP_MESSAGE) [N/y/?] n Use sendfile system call (FEATURE_USE_SENDFILE) [Y/n/?] y Copy buffer size, in kilobytes (FEATURE_COPYBUF_KB) [4] 4 Skip rootfs in mount table (FEATURE_SKIP_ROOTFS) [Y/n/?] y Use clock_gettime(CLOCK_MONOTONIC) syscall (MONOTONIC_SYSCALL) [Y/n/?] y Use ioctl names rather than hex values in error messages (IOCTL_HEX2STR_ERROR) [Y/n/?] y Support infiniband HW (FEATURE_HWIB) [Y/n/?] y * * Applets * * * Archival Utilities * Make tar, rpm, modprobe etc understand .xz data (FEATURE_SEAMLESS_XZ) [N/y] n Make tar, rpm, modprobe etc understand .lzma data (FEATURE_SEAMLESS_LZMA) [N/y] n Make tar, rpm, modprobe etc understand .bz2 data (FEATURE_SEAMLESS_BZ2) [N/y] n Make tar, rpm, modprobe etc understand .gz data (FEATURE_SEAMLESS_GZ) [N/y] n Make tar, rpm, modprobe etc understand .Z data (FEATURE_SEAMLESS_Z) [N/y] n ar (9.5 kb) (AR) [Y/n/?] y Support long filenames (not needed for debs) (FEATURE_AR_LONG_FILENAMES) [N/y/?] n Support archive creation (FEATURE_AR_CREATE) [Y/n/?] y uncompress (7.1 kb) (UNCOMPRESS) [N/y/?] n gunzip (11 kb) (GUNZIP) [Y/n/?] y zcat (24 kb) (ZCAT) [Y/n/?] y Enable long options (FEATURE_GUNZIP_LONG_OPTIONS) [Y/n] y bunzip2 (8.7 kb) (BUNZIP2) [Y/n/?] y bzcat (8.7 kb) (BZCAT) [Y/n/?] y unlzma (7.5 kb) (UNLZMA) [Y/n/?] y lzcat (7.5 kb) (LZCAT) [Y/n/?] y lzma -d (LZMA) [Y/n/?] y unxz (13 kb) (UNXZ) [Y/n/?] y xzcat (13 kb) (XZCAT) [Y/n/?] y xz -d (XZ) [Y/n/?] y bzip2 (16 kb) (BZIP2) [N/y/?] n Enable decompression (FEATURE_BZIP2_DECOMPRESS) [Y/?] y cpio (15 kb) (CPIO) [Y/n/?] y Support archive creation (FEATURE_CPIO_O) [N/y/?] n dpkg (43 kb) (DPKG) [N/y/?] n dpkg-deb (30 kb) (DPKG_DEB) [N/y/?] n gzip (17 kb) (GZIP) [Y/n/?] y Enable long options (FEATURE_GZIP_LONG_OPTIONS) [N/y] n Trade memory for speed (0:small,slow - 2:fast,big) (GZIP_FAST) [0] 0 Enable compression levels (FEATURE_GZIP_LEVELS) [N/y/?] n Enable decompression (FEATURE_GZIP_DECOMPRESS) [Y/?] y lzop (12 kb) (LZOP) [N/y/?] n unlzop (13 kb) (UNLZOP) [Y/n/?] y lzopcat (13 kb) (LZOPCAT) [Y/n/?] y lzop compression levels 7,8,9 (not very useful) (LZOP_COMPR_HIGH) [N/y/?] n rpm (32 kb) (RPM) [N/y/?] n rpm2cpio (21 kb) (RPM2CPIO) [N/y/?] n tar (39 kb) (TAR) [Y/n/?] y Enable long options (FEATURE_TAR_LONG_OPTIONS) [Y/n] y Enable -c (archive creation) (FEATURE_TAR_CREATE) [Y/n] y Enable -X (exclude from) and -T (include from) options (FEATURE_TAR_FROM) [Y/n/?] y Support old tar header format (FEATURE_TAR_OLDGNU_COMPATIBILITY) [N/y/?] n Enable untarring of tarballs with checksums produced by buggy Sun tar (FEATURE_TAR_OLDSUN_COMPATIBILITY) [N/y/?] n Support GNU tar extensions (long filenames) (FEATURE_TAR_GNU_EXTENSIONS) [Y/n] y Support writing to an external program (--to-command) (FEATURE_TAR_TO_COMMAND) [Y/n/?] y Enable use of user and group names (FEATURE_TAR_UNAME_GNAME) [N/y/?] n Enable -m (do not preserve time) GNU option (FEATURE_TAR_NOPRESERVE_TIME) [N/y] n unzip (26 kb) (UNZIP) [Y/n/?] y Read and use Central Directory data (FEATURE_UNZIP_CDF) [Y/n/?] y Support compression method 12 (bzip2) (FEATURE_UNZIP_BZIP2) [Y/n] y Support compression method 14 (lzma) (FEATURE_UNZIP_LZMA) [Y/n] y Support compression method 95 (xz) (FEATURE_UNZIP_XZ) [Y/n] y Optimize lzma for speed (FEATURE_LZMA_FAST) [N/y/?] n * * Coreutils * basename (438 bytes) (BASENAME) [Y/n/?] y cat (5.6 kb) (CAT) [Y/?] y Enable -n and -b options (FEATURE_CATN) [Y/n/?] y cat -v[etA] (FEATURE_CATV) [Y/n/?] y chgrp (7.6 kb) (CHGRP) [Y/n/?] y chmod (5.5 kb) (CHMOD) [Y/n/?] y chown (7.6 kb) (CHOWN) [Y/n/?] y Enable long options (FEATURE_CHOWN_LONG_OPTIONS) [N/y] n chroot (3.7 kb) (CHROOT) [Y/n/?] y cksum (4.1 kb) (CKSUM) [Y/n/?] y comm (4.2 kb) (COMM) [N/y/?] n cp (10 kb) (CP) [Y/n/?] y Enable long options (FEATURE_CP_LONG_OPTIONS) [N/y/?] n cut (5.8 kb) (CUT) [Y/n/?] y date (7 kb) (DATE) [Y/n/?] y Enable ISO date format output (-I) (FEATURE_DATE_ISOFMT) [Y/n/?] y Support %[num]N nanosecond format specifier (FEATURE_DATE_NANO) [N/y/?] n Support weird 'date MMDDhhmm[[YY]YY][.ss]' format (FEATURE_DATE_COMPAT) [Y/n/?] y dd (7.5 kb) (DD) [Y/n/?] y Enable signal handling for status reporting (FEATURE_DD_SIGNAL_HANDLING) [Y/n/?] y Enable the third status line upon signal (FEATURE_DD_THIRD_STATUS_LINE) [N/y/?] n Enable ibs, obs, iflag, oflag and conv options (FEATURE_DD_IBS_OBS) [Y/n/?] y Enable status display options (FEATURE_DD_STATUS) [Y/n/?] y df (6.8 kb) (DF) [Y/n/?] y Enable -a, -i, -B (FEATURE_DF_FANCY) [N/y/?] n dirname (329 bytes) (DIRNAME) [Y/n/?] y dos2unix (5.2 kb) (DOS2UNIX) [Y/n/?] y unix2dos (5.2 kb) (UNIX2DOS) [Y/n/?] y du (6.3 kb) (DU) [Y/n/?] y Use default blocksize of 1024 bytes (else it's 512 bytes) (FEATURE_DU_DEFAULT_BLOCKSIZE_1K) [Y/n] y echo (1.8 kb) (ECHO) [Y/?] y Enable -n and -e options (FEATURE_FANCY_ECHO) [Y/n] y env (4 kb) (ENV) [Y/n/?] y expand (5.1 kb) (EXPAND) [N/y/?] n unexpand (5.3 kb) (UNEXPAND) [N/y/?] n expr (6.6 kb) (EXPR) [Y/n/?] y Extend Posix numbers support to 64 bit (EXPR_MATH_SUPPORT_64) [Y/n/?] y factor (2.7 kb) (FACTOR) [Y/n/?] y false (tiny) (FALSE) [Y/n/?] y fold (4.6 kb) (FOLD) [Y/n/?] y fsync (3.6 kb) (FSYNC) [N/y/?] n head (3.8 kb) (HEAD) [Y/n/?] y Enable -c, -q, and -v (FEATURE_FANCY_HEAD) [Y/n] y hostid (286 bytes) (HOSTID) [Y/n/?] y id (7 kb) (ID) [Y/n/?] y groups (6.7 kb) (GROUPS) [N/y/?] n install (12 kb) (INSTALL) [Y/n/?] y Enable long options (FEATURE_INSTALL_LONG_OPTIONS) [Y/n] y link (3.2 kb) (LINK) [Y/n/?] y ln (4.9 kb) (LN) [Y/n/?] y logname (1.1 kb) (LOGNAME) [Y/n/?] y ls (14 kb) (LS) [Y/n/?] y Enable filetyping options (-p and -F) (FEATURE_LS_FILETYPES) [Y/n] y Enable symlinks dereferencing (-L) (FEATURE_LS_FOLLOWLINKS) [Y/n] y Enable recursion (-R) (FEATURE_LS_RECURSIVE) [Y/n] y Enable -w WIDTH and window size autodetection (FEATURE_LS_WIDTH) [Y/n] y Sort the file names (FEATURE_LS_SORTFILES) [Y/n/?] y Show file timestamps (FEATURE_LS_TIMESTAMPS) [Y/n/?] y Show username/groupnames (FEATURE_LS_USERNAME) [Y/n/?] y Allow use of color to identify file types (FEATURE_LS_COLOR) [Y/n/?] y Produce colored ls output by default (FEATURE_LS_COLOR_IS_DEFAULT) [Y/n/?] y md5sum (6.5 kb) (MD5SUM) [Y/n/?] y sha1sum (5.9 kb) (SHA1SUM) [Y/n/?] y sha256sum (7 kb) (SHA256SUM) [Y/n/?] y sha512sum (7.4 kb) (SHA512SUM) [Y/n/?] y sha3sum (6.1 kb) (SHA3SUM) [Y/n/?] y * * Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum * Enable -c, -s and -w options (FEATURE_MD5_SHA1_SUM_CHECK) [Y/n/?] y mkdir (4.5 kb) (MKDIR) [Y/n/?] y mkfifo (3.8 kb) (MKFIFO) [Y/n/?] y mknod (4.5 kb) (MKNOD) [Y/n/?] y mktemp (4.2 kb) (MKTEMP) [Y/n/?] y mv (10 kb) (MV) [Y/n/?] y nice (2.1 kb) (NICE) [Y/n/?] y nl (4.6 kb) (NL) [Y/n/?] y nohup (2 kb) (NOHUP) [Y/n/?] y nproc (3.7 kb) (NPROC) [Y/n/?] y od (11 kb) (OD) [Y/n/?] y paste (4.9 kb) (PASTE) [Y/n/?] y printenv (1.3 kb) (PRINTENV) [Y/n/?] y printf (3.8 kb) (PRINTF) [Y/n/?] y pwd (3.7 kb) (PWD) [Y/n/?] y readlink (4 kb) (READLINK) [Y/n/?] y Enable canonicalization by following all symlinks (-f) (FEATURE_READLINK_FOLLOW) [Y/n/?] y realpath (1.6 kb) (REALPATH) [Y/n/?] y rm (5.4 kb) (RM) [Y/n/?] y rmdir (3.5 kb) (RMDIR) [Y/n/?] y seq (3.8 kb) (SEQ) [Y/n/?] y shred (4.9 kb) (SHRED) [Y/n/?] y shuf (5.4 kb) (SHUF) [N/y/?] n sleep (2 kb) (SLEEP) [Y/?] y Enable multiple arguments and s/m/h/d suffixes (FEATURE_FANCY_SLEEP) [Y/n/?] y sort (7.7 kb) (SORT) [Y/n/?] y Full SuSv3 compliant sort (support -ktcbdfiogM) (FEATURE_SORT_BIG) [Y/n/?] y Use less memory (but might be slower) (FEATURE_SORT_OPTIMIZE_MEMORY) [N/y/?] n split (5 kb) (SPLIT) [N/y/?] n stat (11 kb) (STAT) [N/y/?] n stty (8.9 kb) (STTY) [Y/n/?] y sum (4 kb) (SUM) [N/y/?] n sync (3.8 kb) (SYNC) [Y/n/?] y Enable -d and -f flags (requires syncfs(2) in libc) (FEATURE_SYNC_FANCY) [N/y/?] n tac (3.9 kb) (TAC) [N/y/?] n tail (6.8 kb) (TAIL) [Y/n/?] y Enable -q, -s, -v, and -F options (FEATURE_FANCY_TAIL) [Y/n/?] y tee (4.2 kb) (TEE) [Y/n/?] y Enable block I/O (larger/faster) instead of byte I/O (FEATURE_TEE_USE_BLOCK_IO) [Y/n/?] y test (4.1 kb) (TEST) [Y/n/?] y test as [ (TEST1) [Y/n/?] y test as [[ (TEST2) [Y/n/?] y Extend test to 64 bit (FEATURE_TEST_64) [Y/n/?] y timeout (6 kb) (TIMEOUT) [N/y/?] n touch (5.9 kb) (TOUCH) [Y/n/?] y Add support for -h (FEATURE_TOUCH_NODEREF) [N/y/?] n Add support for SUSV3 features (-d -t -r) (FEATURE_TOUCH_SUSV3) [Y/n/?] y tr (5.1 kb) (TR) [Y/n/?] y Enable character classes (such as [:upper:]) (FEATURE_TR_CLASSES) [Y/n/?] y Enable equivalence classes (FEATURE_TR_EQUIV) [Y/n/?] y true (tiny) (TRUE) [Y/n/?] y truncate (4.2 kb) (TRUNCATE) [Y/n/?] y tty (3.6 kb) (TTY) [Y/n/?] y uname (3.9 kb) (UNAME) [Y/n/?] y Operating system name (UNAME_OSNAME) [GNU/Linux] GNU/Linux arch (1.1 kb) (BB_ARCH) [Y/n/?] y uniq (4.9 kb) (UNIQ) [Y/n/?] y unlink (3.2 kb) (UNLINK) [Y/n/?] y usleep (1.3 kb) (USLEEP) [Y/n/?] y uudecode (5.8 kb) (UUDECODE) [Y/n/?] y base64 (4.9 kb) (BASE64) [N/y/?] n uuencode (4.4 kb) (UUENCODE) [Y/n/?] y wc (4.5 kb) (WC) [Y/n/?] y Support very large counts (FEATURE_WC_LARGE) [N/y/?] n who (3.9 kb) (WHO) [Y/n/?] y w (3.8 kb) (W) [Y/n/?] y users (3.4 kb) (USERS) [N/y/?] n whoami (3.2 kb) (WHOAMI) [Y/n/?] y yes (1.2 kb) (YES) [Y/n/?] y * * Common options * Support verbose options (usually -v) for various applets (FEATURE_VERBOSE) [Y/n/?] y * * Common options for cp and mv * Preserve hard links (FEATURE_PRESERVE_HARDLINKS) [Y/n/?] y * * Common options for df, du, ls * Support human readable output (example 13k, 23M, 235G) (FEATURE_HUMAN_READABLE) [Y/n/?] y * * Console Utilities * chvt (2 kb) (CHVT) [Y/n/?] y clear (tiny) (CLEAR) [Y/n/?] y deallocvt (1.9 kb) (DEALLOCVT) [Y/n/?] y dumpkmap (1.6 kb) (DUMPKMAP) [Y/n/?] y fgconsole (1.5 kb) (FGCONSOLE) [N/y/?] n kbd_mode (4.1 kb) (KBD_MODE) [N/y/?] n loadfont (5.2 kb) (LOADFONT) [Y/n/?] y setfont (24 kb) (SETFONT) [N/y/?] n * * Common options for loadfont and setfont * Support PSF2 console fonts (FEATURE_LOADFONT_PSF2) [Y/n] y Support old (raw) console fonts (FEATURE_LOADFONT_RAW) [Y/n] y loadkmap (1.8 kb) (LOADKMAP) [Y/n/?] y openvt (7.2 kb) (OPENVT) [Y/n/?] y reset (345 bytes) (RESET) [Y/n/?] y resize (903 bytes) (RESIZE) [Y/n/?] y Print environment variables (FEATURE_RESIZE_PRINT) [Y/n/?] y setconsole (3.6 kb) (SETCONSOLE) [Y/n/?] y Enable long options (FEATURE_SETCONSOLE_LONG_OPTIONS) [N/y] n setkeycodes (2.1 kb) (SETKEYCODES) [Y/n/?] y setlogcons (1.8 kb) (SETLOGCONS) [Y/n/?] y showkey (4.7 kb) (SHOWKEY) [N/y/?] n * * Debian Utilities * pipe_progress (275 bytes) (PIPE_PROGRESS) [Y/n/?] y run-parts (6.1 kb) (RUN_PARTS) [Y/n/?] y Enable long options (FEATURE_RUN_PARTS_LONG_OPTIONS) [Y/n] y Support additional arguments (FEATURE_RUN_PARTS_FANCY) [N/y/?] n start-stop-daemon (12 kb) (START_STOP_DAEMON) [Y/n/?] y Enable long options (FEATURE_START_STOP_DAEMON_LONG_OPTIONS) [Y/n] y Support additional arguments (FEATURE_START_STOP_DAEMON_FANCY) [Y/n/?] y which (3.8 kb) (WHICH) [Y/n/?] y * * klibc-utils * minips (11 kb) (MINIPS) [N/y/?] n nuke (2.9 kb) (NUKE) [Y/n/?] y resume (3.2 kb) (RESUME) [Y/n/?] y run-init (7.7 kb) (RUN_INIT) [Y/n/?] y * * Editors * awk (23 kb) (AWK) [Y/n/?] y Enable math functions (requires libm) (FEATURE_AWK_LIBM) [N/y/?] n Enable a few GNU extensions (FEATURE_AWK_GNU_EXTENSIONS) [Y/n/?] y cmp (4.9 kb) (CMP) [Y/n/?] y diff (13 kb) (DIFF) [Y/n/?] y Enable long options (FEATURE_DIFF_LONG_OPTIONS) [N/y] n Enable directory support (FEATURE_DIFF_DIR) [Y/n/?] y ed (21 kb) (ED) [N/y/?] n patch (9.4 kb) (PATCH) [Y/n/?] y sed (12 kb) (SED) [Y/n/?] y vi (23 kb) (VI) [Y/n/?] y Maximum screen width (FEATURE_VI_MAX_LEN) [4096] 4096 Allow to display 8-bit chars (otherwise shows dots) (FEATURE_VI_8BIT) [Y/n/?] y Enable ":" colon commands (no "ex" mode) (FEATURE_VI_COLON) [Y/n/?] y Enable yank/put commands and mark cmds (FEATURE_VI_YANKMARK) [Y/n/?] y Enable search and replace cmds (FEATURE_VI_SEARCH) [Y/n/?] y Enable regex in search and replace (FEATURE_VI_REGEX_SEARCH) [N/y/?] n Catch signals (FEATURE_VI_USE_SIGNALS) [Y/n/?] y Remember previous cmd and "." cmd (FEATURE_VI_DOT_CMD) [Y/n/?] y Enable -R option and "view" mode (FEATURE_VI_READONLY) [Y/n/?] y Enable settable options, ai ic showmatch (FEATURE_VI_SETOPTS) [Y/n/?] y Support :set (FEATURE_VI_SET) [Y/n] y Handle window resize (FEATURE_VI_WIN_RESIZE) [Y/n/?] y Use 'tell me cursor position' ESC sequence to measure window (FEATURE_VI_ASK_TERMINAL) [Y/n/?] y Support undo command "u" (FEATURE_VI_UNDO) [Y/n/?] y Enable undo operation queuing (FEATURE_VI_UNDO_QUEUE) [Y/n/?] y Maximum undo character queue size (FEATURE_VI_UNDO_QUEUE_MAX) [256] 256 Allow vi and awk to execute shell commands (FEATURE_ALLOW_EXEC) [Y/n/?] y * * Finding Utilities * find (14 kb) (FIND) [Y/n/?] y Enable -print0: NUL-terminated output (FEATURE_FIND_PRINT0) [Y/n/?] y Enable -mtime: modified time matching (FEATURE_FIND_MTIME) [Y/n/?] y Enable -mmin: modified time matching by minutes (FEATURE_FIND_MMIN) [Y/n/?] y Enable -perm: permissions matching (FEATURE_FIND_PERM) [Y/n] y Enable -type: file type matching (file/dir/link/...) (FEATURE_FIND_TYPE) [Y/n/?] y Enable -executable: file is executable (FEATURE_FIND_EXECUTABLE) [Y/n] y Enable -xdev: 'stay in filesystem' (FEATURE_FIND_XDEV) [Y/n] y Enable -mindepth N and -maxdepth N (FEATURE_FIND_MAXDEPTH) [Y/n] y Enable -newer: compare file modification times (FEATURE_FIND_NEWER) [Y/n/?] y Enable -inum: inode number matching (FEATURE_FIND_INUM) [N/y] n Enable -exec: execute commands (FEATURE_FIND_EXEC) [Y/n/?] y Enable -exec ... {} + (FEATURE_FIND_EXEC_PLUS) [Y/n/?] y Enable -user: username/uid matching (FEATURE_FIND_USER) [Y/n] y Enable -group: group/gid matching (FEATURE_FIND_GROUP) [Y/n] y Enable the 'not' (!) operator (FEATURE_FIND_NOT) [Y/n/?] y Enable -depth (FEATURE_FIND_DEPTH) [Y/n/?] y Enable parens in options (FEATURE_FIND_PAREN) [Y/n/?] y Enable -size: file size matching (FEATURE_FIND_SIZE) [Y/n] y Enable -prune: exclude subdirectories (FEATURE_FIND_PRUNE) [Y/n/?] y Enable -quit: exit (FEATURE_FIND_QUIT) [Y/n/?] y Enable -delete: delete files/dirs (FEATURE_FIND_DELETE) [N/y/?] n Enable -path: match pathname with shell pattern (FEATURE_FIND_PATH) [Y/n/?] y Enable -regex: match pathname with regex (FEATURE_FIND_REGEX) [Y/n/?] y Enable -links: link count matching (FEATURE_FIND_LINKS) [N/y/?] n grep (8.6 kb) (GREP) [Y/n/?] y egrep (7.8 kb) (EGREP) [Y/n/?] y fgrep (7.8 kb) (FGREP) [Y/n/?] y Enable before and after context flags (-A, -B and -C) (FEATURE_GREP_CONTEXT) [Y/n/?] y xargs (7.2 kb) (XARGS) [Y/n/?] y Enable -p: prompt and confirmation (FEATURE_XARGS_SUPPORT_CONFIRMATION) [N/y/?] n Enable single and double quotes and backslash (FEATURE_XARGS_SUPPORT_QUOTES) [Y/n/?] y Enable -x: exit if -s or -n is exceeded (FEATURE_XARGS_SUPPORT_TERMOPT) [Y/n/?] y Enable -0: NUL-terminated input (FEATURE_XARGS_SUPPORT_ZERO_TERM) [Y/n/?] y Enable -I STR: string to replace (FEATURE_XARGS_SUPPORT_REPL_STR) [Y/n/?] y Enable -P N: processes to run in parallel (FEATURE_XARGS_SUPPORT_PARALLEL) [Y/n] y Enable -a FILE: use FILE instead of stdin (FEATURE_XARGS_SUPPORT_ARGS_FILE) [Y/n] y * * Init Utilities * bootchartd (10 kb) (BOOTCHARTD) [N/y/?] n halt (4 kb) (HALT) [Y/n/?] y poweroff (4 kb) (POWEROFF) [Y/n/?] y reboot (4 kb) (REBOOT) [Y/n/?] y Before signaling init, make sure it is ready for it (FEATURE_WAIT_FOR_INIT) [Y/n/?] y init (10 kb) (INIT) [Y/n/?] y linuxrc: support running init from initrd (not initramfs) (LINUXRC) [Y/n/?] y Support reading an inittab file (FEATURE_USE_INITTAB) [Y/n/?] y Support killing processes that have been removed from inittab (FEATURE_KILL_REMOVED) [Y/n/?] y How long to wait between TERM and KILL (0 - send TERM only) (FEATURE_KILL_DELAY) [0] 0 Run commands with leading dash with controlling tty (FEATURE_INIT_SCTTY) [Y/n/?] y Enable init to write to syslog (FEATURE_INIT_SYSLOG) [Y/n/?] y Be quiet on boot (no 'init started:' message) (FEATURE_INIT_QUIET) [Y/n] y Support dumping core for child processes (debugging only) (FEATURE_INIT_COREDUMPS) [N/y/?] n Initial terminal type (INIT_TERMINAL_TYPE) [linux] linux Clear init's command line (FEATURE_INIT_MODIFY_CMDLINE) [Y/n/?] y * * Login/Password Management Utilities * Support shadow passwords (FEATURE_SHADOWPASSWDS) [Y/n/?] y Use internal password and group functions rather than system functions (USE_BB_PWD_GRP) [N/y/?] n Use internal crypt functions (USE_BB_CRYPT) [Y/n/?] y Enable SHA256/512 crypt functions (USE_BB_CRYPT_SHA) [Y/n/?] y add-shell (3.1 kb) (ADD_SHELL) [N/y/?] n remove-shell (3 kb) (REMOVE_SHELL) [N/y/?] n addgroup (8.6 kb) (ADDGROUP) [Y/n/?] y Support adding users to groups (FEATURE_ADDUSER_TO_GROUP) [N/y/?] n adduser (15 kb) (ADDUSER) [Y/n/?] y Enable sanity check on user/group names in adduser and addgroup (FEATURE_CHECK_NAMES) [N/y/?] n Last valid uid or gid for adduser and addgroup (LAST_ID) [60000] 60000 First valid system uid or gid for adduser and addgroup (FIRST_SYSTEM_ID) [100] 100 Last valid system uid or gid for adduser and addgroup (LAST_SYSTEM_ID) [999] 999 chpasswd (18 kb) (CHPASSWD) [N/y/?] n Default encryption method (passwd -a, cryptpw -m, chpasswd -c ALG) (FEATURE_DEFAULT_PASSWD_ALGO) [md5] md5 cryptpw (14 kb) (CRYPTPW) [N/y/?] n mkpasswd (15 kb) (MKPASSWD) [Y/n/?] y deluser (9.1 kb) (DELUSER) [Y/n/?] y delgroup (6.4 kb) (DELGROUP) [Y/n/?] y Support removing users from groups (FEATURE_DEL_USER_FROM_GROUP) [N/y/?] n getty (10 kb) (GETTY) [Y/n/?] y login (24 kb) (LOGIN) [Y/n/?] y Run logged in session in a child process (LOGIN_SESSION_AS_CHILD) [N/y/?] n Support login scripts (LOGIN_SCRIPTS) [N/y/?] n Support /etc/nologin (FEATURE_NOLOGIN) [Y/n/?] y Support /etc/securetty (FEATURE_SECURETTY) [Y/n/?] y passwd (21 kb) (PASSWD) [Y/n/?] y Check new passwords for weakness (FEATURE_PASSWD_WEAK_CHECK) [Y/n/?] y su (19 kb) (SU) [Y/n/?] y Log to syslog all attempts to use su (FEATURE_SU_SYSLOG) [Y/n] y If user's shell is not in /etc/shells, disallow -s PROG (FEATURE_SU_CHECKS_SHELLS) [Y/n] y Allow blank passwords only on TTYs in /etc/securetty (FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY) [N/y] n sulogin (17 kb) (SULOGIN) [Y/n/?] y vlock (17 kb) (VLOCK) [Y/n/?] y * * Linux Ext2 FS Progs * chattr (3.8 kb) (CHATTR) [Y/n/?] y fsck (7.4 kb) (FSCK) [Y/n/?] y lsattr (5.5 kb) (LSATTR) [Y/n/?] y tune2fs (4.4 kb) (TUNE2FS) [N/y/?] n * * Linux Module Utilities * Simplified modutils (MODPROBE_SMALL) [N/y/?] n depmod (27 kb) (DEPMOD) [N/y/?] n insmod (22 kb) (INSMOD) [Y/n/?] y lsmod (1.9 kb) (LSMOD) [Y/n/?] y Pretty output (FEATURE_LSMOD_PRETTY_2_6_OUTPUT) [Y/n/?] y modinfo (24 kb) (MODINFO) [N/y/?] n modprobe (28 kb) (MODPROBE) [Y/n/?] y Blacklist support (FEATURE_MODPROBE_BLACKLIST) [N/y/?] n rmmod (3.3 kb) (RMMOD) [Y/n/?] y * * Options common to multiple modutils * Accept module options on modprobe command line (FEATURE_CMDLINE_MODULE_OPTIONS) [Y/n/?] y Support version 2.2/2.4 Linux kernels (FEATURE_2_4_MODULES) [N/y/?] n Support tainted module checking with new kernels (FEATURE_CHECK_TAINTED_MODULE) [Y/n/?] y Try to load module from a mmap'ed area (FEATURE_INSMOD_TRY_MMAP) [N/y/?] n Support module.aliases file (FEATURE_MODUTILS_ALIAS) [Y/n/?] y Support module.symbols file (FEATURE_MODUTILS_SYMBOLS) [Y/n/?] y Default directory containing modules (DEFAULT_MODULES_DIR) [/lib/modules] /lib/modules Default name of modules.dep (DEFAULT_DEPMOD_FILE) [modules.dep] modules.dep * * Linux System Utilities * acpid (9 kb) (ACPID) [N/y/?] n blkdiscard (4.3 kb) (BLKDISCARD) [N/y/?] n blkid (12 kb) (BLKID) [Y/n/?] y Print filesystem type (FEATURE_BLKID_TYPE) [N/y/?] n blockdev (2.3 kb) (BLOCKDEV) [N/y/?] n cal (5.8 kb) (CAL) [N/y/?] n chrt (4.7 kb) (CHRT) [Y/n/?] y dmesg (3.7 kb) (DMESG) [Y/n/?] y Pretty output (FEATURE_DMESG_PRETTY) [Y/n/?] y eject (4 kb) (EJECT) [Y/n/?] y SCSI support (FEATURE_EJECT_SCSI) [N/y/?] n fallocate (4.1 kb) (FALLOCATE) [Y/n/?] y fatattr (1.9 kb) (FATATTR) [N/y/?] n fbset (5.9 kb) (FBSET) [Y/n/?] y Enable extra options (FEATURE_FBSET_FANCY) [Y/n/?] y Enable readmode support (FEATURE_FBSET_READMODE) [Y/n/?] y fdformat (4.4 kb) (FDFORMAT) [Y/n/?] y fdisk (37 kb) (FDISK) [Y/n/?] y Write support (FEATURE_FDISK_WRITABLE) [Y/n/?] y Support AIX disklabels (FEATURE_AIX_LABEL) [N/y/?] n Support SGI disklabels (FEATURE_SGI_LABEL) [N/y/?] n Support SUN disklabels (FEATURE_SUN_LABEL) [N/y/?] n Support BSD disklabels (FEATURE_OSF_LABEL) [N/y/?] n Support GPT disklabels (FEATURE_GPT_LABEL) [Y/n/?] y Support expert mode (FEATURE_FDISK_ADVANCED) [Y/n/?] y findfs (12 kb) (FINDFS) [N/y/?] n flock (6.3 kb) (FLOCK) [Y/n/?] y fdflush (1.3 kb) (FDFLUSH) [Y/n/?] y freeramdisk (1.3 kb) (FREERAMDISK) [Y/n/?] y fsck.minix (13 kb) (FSCK_MINIX) [N/y/?] n fsfreeze (3.5 kb) (FSFREEZE) [Y/n/?] y fstrim (4.4 kb) (FSTRIM) [Y/n/?] y getopt (5.8 kb) (GETOPT) [Y/n/?] y Support -l LONGOPTs (FEATURE_GETOPT_LONG) [Y/n/?] y hexdump (8.6 kb) (HEXDUMP) [Y/n/?] y Support -R, reverse of 'hexdump -Cv' (FEATURE_HEXDUMP_REVERSE) [N/y/?] n hd (7.8 kb) (HD) [N/y/?] n xxd (8.9 kb) (XXD) [Y/n/?] y hwclock (5.8 kb) (HWCLOCK) [Y/n/?] y Use FHS /var/lib/hwclock/adjtime (FEATURE_HWCLOCK_ADJTIME_FHS) [Y/n/?] y ionice (3.8 kb) (IONICE) [N/y/?] n ipcrm (3.2 kb) (IPCRM) [Y/n/?] y ipcs (11 kb) (IPCS) [Y/n/?] y last (6.1 kb) (LAST) [Y/n/?] y Output extra information (FEATURE_LAST_FANCY) [N/y/?] n losetup (5.5 kb) (LOSETUP) [Y/n/?] y lspci (6.3 kb) (LSPCI) [Y/n/?] y lsusb (4.2 kb) (LSUSB) [Y/n/?] y mdev (17 kb) (MDEV) [Y/n/?] y Support /etc/mdev.conf (FEATURE_MDEV_CONF) [Y/n/?] y Support subdirs/symlinks (FEATURE_MDEV_RENAME) [Y/n/?] y Support regular expressions substitutions when renaming device (FEATURE_MDEV_RENAME_REGEXP) [N/y/?] n Support command execution at device addition/removal (FEATURE_MDEV_EXEC) [Y/n/?] y Support loading of firmware (FEATURE_MDEV_LOAD_FIRMWARE) [N/y/?] n mesg (1.4 kb) (MESG) [Y/n/?] y Enable writing to tty only by group, not by everybody (FEATURE_MESG_ENABLE_ONLY_GROUP) [Y/n/?] y mke2fs (10 kb) (MKE2FS) [Y/n/?] y mkfs.ext2 (10 kb) (MKFS_EXT2) [N/y/?] n mkfs.minix (10 kb) (MKFS_MINIX) [N/y/?] n mkfs_reiser (MKFS_REISER) [N/y/?] n mkdosfs (7.2 kb) (MKDOSFS) [Y/n/?] y mkfs.vfat (7.2 kb) (MKFS_VFAT) [N/y/?] n mkswap (6.3 kb) (MKSWAP) [Y/n/?] y UUID support (FEATURE_MKSWAP_UUID) [N/y/?] n more (7 kb) (MORE) [Y/n/?] y mount (23 kb) (MOUNT) [Y/n/?] y Support -f (fake mount) (FEATURE_MOUNT_FAKE) [N/y/?] n Support -v (verbose) (FEATURE_MOUNT_VERBOSE) [N/y/?] n Support mount helpers (FEATURE_MOUNT_HELPERS) [N/y/?] n Support specifying devices by label or UUID (FEATURE_MOUNT_LABEL) [N/y/?] n Support mounting NFS file systems on Linux < 2.6.23 (FEATURE_MOUNT_NFS) [N/y/?] n Support mounting CIFS/SMB file systems (FEATURE_MOUNT_CIFS) [Y/n/?] y Support lots of -o flags (FEATURE_MOUNT_FLAGS) [Y/n/?] y Support /etc/fstab and -a (mount all) (FEATURE_MOUNT_FSTAB) [Y/n/?] y Support -T (FEATURE_MOUNT_OTHERTAB) [Y/n/?] y mountpoint (4.9 kb) (MOUNTPOINT) [Y/n/?] y nologin (NOLOGIN) [Y/n/?] y Enable dependencies for nologin (NOLOGIN_DEPENDENCIES) [Y/n/?] y nsenter (6.5 kb) (NSENTER) [N/y/?] n pivot_root (1.1 kb) (PIVOT_ROOT) [Y/n/?] y rdate (5.6 kb) (RDATE) [Y/n/?] y rdev (1.8 kb) (RDEV) [N/y/?] n readprofile (7.1 kb) (READPROFILE) [Y/n/?] y renice (4.2 kb) (RENICE) [Y/n/?] y rev (4.4 kb) (REV) [N/y/?] n rtcwake (6.8 kb) (RTCWAKE) [N/y/?] n script (8.6 kb) (SCRIPT) [N/y/?] n scriptreplay (2.4 kb) (SCRIPTREPLAY) [N/y/?] n setarch (3.6 kb) (SETARCH) [Y/n/?] y linux32 (3.3 kb) (LINUX32) [Y/n/?] y linux64 (3.3 kb) (LINUX64) [Y/n/?] y setpriv (6.6 kb) (SETPRIV) [Y/n/?] y Support dumping current privilege state (FEATURE_SETPRIV_DUMP) [Y/n/?] y Support capabilities (FEATURE_SETPRIV_CAPABILITIES) [Y/n/?] y Support capability names (FEATURE_SETPRIV_CAPABILITY_NAMES) [Y/n/?] y setsid (3.6 kb) (SETSID) [Y/n/?] y swapon (15 kb) (SWAPON) [Y/n/?] y Support discard option -d (FEATURE_SWAPON_DISCARD) [N/y/?] n Support priority option -p (FEATURE_SWAPON_PRI) [N/y/?] n swapoff (14 kb) (SWAPOFF) [Y/n] y Support specifying devices by label or UUID (FEATURE_SWAPONOFF_LABEL) [Y/n/?] y switch_root (5.5 kb) (SWITCH_ROOT) [Y/n/?] y taskset (4.2 kb) (TASKSET) [N/y/?] n uevent (3.1 kb) (UEVENT) [Y/n/?] y umount (5.1 kb) (UMOUNT) [Y/n/?] y Support -a (unmount all) (FEATURE_UMOUNT_ALL) [Y/n/?] y unshare (7.2 kb) (UNSHARE) [N/y/?] n wall (2.6 kb) (WALL) [N/y/?] n * * Common options for mount/umount * Support loopback mounts (FEATURE_MOUNT_LOOP) [Y/n/?] y Create new loopback devices if needed (FEATURE_MOUNT_LOOP_CREATE) [Y/n/?] y Support old /etc/mtab file (FEATURE_MTAB_SUPPORT) [N/y/?] n * * Filesystem/Volume identification * bcache filesystem (FEATURE_VOLUMEID_BCACHE) [N/y] n btrfs filesystem (FEATURE_VOLUMEID_BTRFS) [N/y] n cramfs filesystem (FEATURE_VOLUMEID_CRAMFS) [N/y] n exFAT filesystem (FEATURE_VOLUMEID_EXFAT) [Y/n/?] y Ext filesystem (FEATURE_VOLUMEID_EXT) [Y/n] y f2fs filesystem (FEATURE_VOLUMEID_F2FS) [Y/n/?] y fat filesystem (FEATURE_VOLUMEID_FAT) [Y/n] y hfs filesystem (FEATURE_VOLUMEID_HFS) [N/y] n iso9660 filesystem (FEATURE_VOLUMEID_ISO9660) [N/y] n jfs filesystem (FEATURE_VOLUMEID_JFS) [N/y] n linuxraid (FEATURE_VOLUMEID_LINUXRAID) [N/y] n linux swap filesystem (FEATURE_VOLUMEID_LINUXSWAP) [N/y] n luks filesystem (FEATURE_VOLUMEID_LUKS) [N/y] n minix filesystem (FEATURE_VOLUMEID_MINIX) [Y/n] y nilfs filesystem (FEATURE_VOLUMEID_NILFS) [N/y/?] n ntfs filesystem (FEATURE_VOLUMEID_NTFS) [N/y] n ocfs2 filesystem (FEATURE_VOLUMEID_OCFS2) [N/y] n Reiser filesystem (FEATURE_VOLUMEID_REISERFS) [N/y] n romfs filesystem (FEATURE_VOLUMEID_ROMFS) [N/y] n sysv filesystem (FEATURE_VOLUMEID_SYSV) [N/y] n UBIFS filesystem (FEATURE_VOLUMEID_UBIFS) [Y/n/?] y udf filesystem (FEATURE_VOLUMEID_UDF) [N/y] n xfs filesystem (FEATURE_VOLUMEID_XFS) [N/y] n * * Miscellaneous Utilities * adjtimex (4.7 kb) (ADJTIMEX) [N/y/?] n bbconfig (9.7 kb) (BBCONFIG) [N/y/?] n bc (45 kb) (BC) [Y/n/?] y dc (36 kb) (DC) [Y/n/?] y Use bc code base for dc (larger, more features) (FEATURE_DC_BIG) [Y] y Interactive mode (+4kb) (FEATURE_BC_INTERACTIVE) [Y/n/?] y Enable bc/dc long options (FEATURE_BC_LONG_OPTIONS) [Y/n] y beep (2.4 kb) (BEEP) [N/y/?] n chat (6.3 kb) (CHAT) [N/y/?] n conspy (10 kb) (CONSPY) [N/y/?] n crond (14 kb) (CROND) [Y/n/?] y Support -d (redirect output to stderr) (FEATURE_CROND_D) [N/y/?] n Report command output via email (using sendmail) (FEATURE_CROND_CALL_SENDMAIL) [N/y/?] n Support special times (@reboot, @daily, etc) in crontabs (FEATURE_CROND_SPECIAL_TIMES) [Y/n/?] y crond spool directory (FEATURE_CROND_DIR) [/var/spool/cron] /var/spool/cron crontab (10 kb) (CRONTAB) [Y/n/?] y devfsd (obsolete) (DEVFSD) [N/y/?] n Use devfs names for all devices (obsolete) (FEATURE_DEVFS) [N/y/?] n devmem (2.5 kb) (DEVMEM) [Y/n/?] y fbsplash (26 kb) (FBSPLASH) [N/y/?] n flash_eraseall (5.9 kb) (FLASH_ERASEALL) [N/y/?] n flash_lock (2.1 kb) (FLASH_LOCK) [N/y/?] n flash_unlock (1.3 kb) (FLASH_UNLOCK) [N/y/?] n flashcp (5.3 kb) (FLASHCP) [N/y/?] n hdparm (25 kb) (HDPARM) [Y/n/?] y Support obtaining detailed information directly from drives (FEATURE_HDPARM_GET_IDENTITY) [Y/n/?] y Register an IDE interface (DANGEROUS) (FEATURE_HDPARM_HDIO_SCAN_HWIF) [N/y/?] n Un-register an IDE interface (DANGEROUS) (FEATURE_HDPARM_HDIO_UNREGISTER_HWIF) [N/y/?] n Perform device reset (DANGEROUS) (FEATURE_HDPARM_HDIO_DRIVE_RESET) [N/y/?] n Tristate device for hotswap (DANGEROUS) (FEATURE_HDPARM_HDIO_TRISTATE_HWIF) [N/y/?] n Get/set using_dma flag (FEATURE_HDPARM_HDIO_GETSET_DMA) [N/y/?] n hexedit (21 kb) (HEXEDIT) [Y/n/?] y i2cget (5.5 kb) (I2CGET) [Y/n/?] y i2cset (6.7 kb) (I2CSET) [Y/n/?] y i2cdump (7.1 kb) (I2CDUMP) [Y/n/?] y i2cdetect (7.1 kb) (I2CDETECT) [Y/n/?] y inotifyd (3.6 kb) (INOTIFYD) [N/y/?] n less (16 kb) (LESS) [Y/n/?] y Max number of input lines less will try to eat (FEATURE_LESS_MAXLINES) [9999999] 9999999 Enable bracket searching (FEATURE_LESS_BRACKETS) [Y/n/?] y Enable -m/-M (FEATURE_LESS_FLAGS) [Y/n/?] y Enable -S (FEATURE_LESS_TRUNCATE) [Y/n/?] y Enable marks (FEATURE_LESS_MARKS) [N/y/?] n Enable regular expressions (FEATURE_LESS_REGEXP) [Y/n/?] y Enable automatic resizing on window size changes (FEATURE_LESS_WINCH) [N/y/?] n Enable flag changes ('-' command) (FEATURE_LESS_DASHCMD) [N/y/?] n lsscsi (2.5 kb) (LSSCSI) [Y/n/?] y makedevs (9.2 kb) (MAKEDEVS) [Y/n/?] y Choose makedevs behaviour 1. leaf (FEATURE_MAKEDEVS_LEAF) > 2. table (FEATURE_MAKEDEVS_TABLE) choice[1-2]: 2 man (26 kb) (MAN) [N/y/?] n microcom (5.7 kb) (MICROCOM) [Y/n/?] y mt (2.5 kb) (MT) [Y/n/?] y nandwrite (4.8 kb) (NANDWRITE) [N/y/?] n nanddump (5.2 kb) (NANDDUMP) [N/y/?] n partprobe (3.5 kb) (PARTPROBE) [Y/n/?] y raidautorun (1.3 kb) (RAIDAUTORUN) [N/y/?] n readahead (1.5 kb) (READAHEAD) [N/y/?] n rfkill (4.4 kb) (RFKILL) [N/y/?] n runlevel (559 bytes) (RUNLEVEL) [Y/n/?] y rx (2.9 kb) (RX) [N/y/?] n setfattr (3.7 kb) (SETFATTR) [Y/n/?] y setserial (6.9 kb) (SETSERIAL) [Y/n/?] y strings (4.6 kb) (STRINGS) [Y/n/?] y time (6.8 kb) (TIME) [Y/n/?] y ttysize (432 bytes) (TTYSIZE) [N/y/?] n ubiattach (4.2 kb) (UBIATTACH) [N/y/?] n ubidetach (4.1 kb) (UBIDETACH) [N/y/?] n ubimkvol (5.3 kb) (UBIMKVOL) [N/y/?] n ubirmvol (4.9 kb) (UBIRMVOL) [N/y/?] n ubirsvol (4.2 kb) (UBIRSVOL) [N/y/?] n ubiupdatevol (5.2 kb) (UBIUPDATEVOL) [N/y/?] n ubirename (2.4 kb) (UBIRENAME) [Y/n/?] y volname (1.6 kb) (VOLNAME) [N/y/?] n watchdog (5.3 kb) (WATCHDOG) [Y/n/?] y * * Networking Utilities * Enable IPv6 support (FEATURE_IPV6) [Y/n/?] y Enable Unix domain socket support (usually not needed) (FEATURE_UNIX_LOCAL) [N/y/?] n Prefer IPv4 addresses from DNS queries (FEATURE_PREFER_IPV4_ADDRESS) [Y/n/?] y Verbose resolution errors (VERBOSE_RESOLUTION_ERRORS) [N/y/?] n arp (10 kb) (ARP) [Y/n/?] y arping (9 kb) (ARPING) [Y/n/?] y brctl (4.7 kb) (BRCTL) [N/y/?] n dnsd (9.8 kb) (DNSD) [Y/n/?] y ether-wake (4.9 kb) (ETHER_WAKE) [Y/n/?] y ftpd (30 kb) (FTPD) [N/y/?] n ftpget (7.8 kb) (FTPGET) [N/y/?] n ftpput (7.5 kb) (FTPPUT) [N/y/?] n hostname (5.5 kb) (HOSTNAME) [Y/n/?] y dnsdomainname (3.6 kb) (DNSDOMAINNAME) [Y/n/?] y httpd (32 kb) (HTTPD) [N/y/?] n ifconfig (12 kb) (IFCONFIG) [Y/n/?] y Enable status reporting output (+7k) (FEATURE_IFCONFIG_STATUS) [Y/n/?] y Enable slip-specific options "keepalive" and "outfill" (FEATURE_IFCONFIG_SLIP) [Y/n/?] y Enable options "mem_start", "io_addr", and "irq" (FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ) [Y/n/?] y Enable option "hw" (ether only) (FEATURE_IFCONFIG_HW) [Y/n/?] y Set the broadcast automatically (FEATURE_IFCONFIG_BROADCAST_PLUS) [N/y/?] n ifenslave (13 kb) (IFENSLAVE) [N/y/?] n ifplugd (10 kb) (IFPLUGD) [N/y/?] n ifup (14 kb) (IFUP) [Y/n/?] y ifdown (13 kb) (IFDOWN) [Y/n/?] y Absolute path to ifstate file (IFUPDOWN_IFSTATE_PATH) [/var/run/ifstate] /var/run/ifstate Use ip tool (else ifconfig/route is used) (FEATURE_IFUPDOWN_IP) [Y/n/?] y Support IPv4 (FEATURE_IFUPDOWN_IPV4) [Y/n/?] y Support IPv6 (FEATURE_IFUPDOWN_IPV6) [Y/n/?] y Enable mapping support (FEATURE_IFUPDOWN_MAPPING) [Y/n/?] y Support external DHCP clients (FEATURE_IFUPDOWN_EXTERNAL_DHCP) [N/y/?] n inetd (18 kb) (INETD) [Y/n/?] y Support echo service on port 7 (FEATURE_INETD_SUPPORT_BUILTIN_ECHO) [Y/n/?] y Support discard service on port 8 (FEATURE_INETD_SUPPORT_BUILTIN_DISCARD) [Y/n/?] y Support time service on port 37 (FEATURE_INETD_SUPPORT_BUILTIN_TIME) [Y/n/?] y Support daytime service on port 13 (FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME) [Y/n/?] y Support chargen service on port 19 (FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN) [Y/n/?] y Support RPC services (FEATURE_INETD_RPC) [N/y/?] n ip (35 kb) (IP) [Y/n/?] y ipaddr (14 kb) (IPADDR) [Y/n/?] y iplink (17 kb) (IPLINK) [Y/n/?] y iproute (15 kb) (IPROUTE) [Y/n/?] y iptunnel (9.6 kb) (IPTUNNEL) [Y/n/?] y iprule (10 kb) (IPRULE) [Y/n/?] y ipneigh (8.3 kb) (IPNEIGH) [Y/n/?] y ip address (FEATURE_IP_ADDRESS) [Y/?] y ip link (FEATURE_IP_LINK) [Y/?] y ip route (FEATURE_IP_ROUTE) [Y/?] y ip route configuration directory (FEATURE_IP_ROUTE_DIR) [/etc/iproute2] /etc/iproute2 ip tunnel (FEATURE_IP_TUNNEL) [Y/?] y ip rule (FEATURE_IP_RULE) [Y/?] y ip neighbor (FEATURE_IP_NEIGH) [Y/?] y Support displaying rarely used link types (FEATURE_IP_RARE_PROTOCOLS) [N/y/?] n ipcalc (4.4 kb) (IPCALC) [N/y/?] n fakeidentd (8.7 kb) (FAKEIDENTD) [N/y/?] n nameif (6.6 kb) (NAMEIF) [Y/n/?] y Extended nameif (FEATURE_NAMEIF_EXTENDED) [N/y/?] n nbd-client (6 kb) (NBDCLIENT) [N/y/?] n nc (11 kb) (NC) [N/y/?] n netcat (11 kb) (NETCAT) [N/y/?] n netstat (10 kb) (NETSTAT) [Y/n/?] y Enable wide output (FEATURE_NETSTAT_WIDE) [N/y/?] n Enable PID/Program name output (FEATURE_NETSTAT_PRG) [N/y/?] n nslookup (9.7 kb) (NSLOOKUP) [Y/n/?] y Use internal resolver code instead of libc (FEATURE_NSLOOKUP_BIG) [Y/n] y Enable long options (FEATURE_NSLOOKUP_LONG_OPTIONS) [Y/n] y ntpd (22 kb) (NTPD) [N/y/?] n ping (10 kb) (PING) [Y/n/?] y ping6 (11 kb) (PING6) [N/y/?] n Enable fancy ping output (FEATURE_FANCY_PING) [Y/n/?] y pscan (6 kb) (PSCAN) [N/y/?] n route (8.7 kb) (ROUTE) [Y/n/?] y slattach (6.2 kb) (SLATTACH) [N/y/?] n ssl_client (25 kb) (SSL_CLIENT) [N/y/?] n tc (8.3 kb) (TC) [Y/n/?] y Enable ingress (FEATURE_TC_INGRESS) [Y/n] y tcpsvd (14 kb) (TCPSVD) [N/y/?] n udpsvd (13 kb) (UDPSVD) [N/y/?] n telnet (8.8 kb) (TELNET) [Y/n/?] y Pass TERM type to remote host (FEATURE_TELNET_TTYPE) [Y/n/?] y Pass USER type to remote host (FEATURE_TELNET_AUTOLOGIN) [Y/n/?] y Enable window size autodetection (FEATURE_TELNET_WIDTH) [Y/n] y telnetd (12 kb) (TELNETD) [N/y/?] n tftp (11 kb) (TFTP) [Y/n/?] y Enable progress bar (FEATURE_TFTP_PROGRESS_BAR) [N/y] n tftpd (10 kb) (TFTPD) [N/y/?] n Enable 'tftp get' and/or tftpd upload code (FEATURE_TFTP_GET) [Y/n/?] y Enable 'tftp put' and/or tftpd download code (FEATURE_TFTP_PUT) [Y/n/?] y Enable 'blksize' and 'tsize' protocol options (FEATURE_TFTP_BLOCKSIZE) [Y/n/?] y Enable debug (TFTP_DEBUG) [N/y/?] n traceroute (11 kb) (TRACEROUTE) [Y/n/?] y traceroute6 (13 kb) (TRACEROUTE6) [N/y/?] n Enable verbose output (FEATURE_TRACEROUTE_VERBOSE) [N/y/?] n Enable -I option (use ICMP instead of UDP) (FEATURE_TRACEROUTE_USE_ICMP) [N/y] n tunctl (6.2 kb) (TUNCTL) [N/y/?] n vconfig (2.3 kb) (VCONFIG) [Y/n/?] y wget (38 kb) (WGET) [Y/n/?] y Enable long options (FEATURE_WGET_LONG_OPTIONS) [Y/n] y Enable progress bar (+2k) (FEATURE_WGET_STATUSBAR) [Y/n] y Enable HTTP authentication (FEATURE_WGET_AUTHENTICATION) [Y/n/?] y Enable timeout option -T SEC (FEATURE_WGET_TIMEOUT) [Y/n/?] y Support HTTPS using internal TLS code (FEATURE_WGET_HTTPS) [N/y/?] n Try to connect to HTTPS using openssl (FEATURE_WGET_OPENSSL) [N/y/?] n whois (6.3 kb) (WHOIS) [N/y/?] n zcip (8.4 kb) (ZCIP) [N/y/?] n udhcpd (21 kb) (UDHCPD) [N/y/?] n dumpleases (5.1 kb) (DUMPLEASES) [N/y/?] n dhcprelay (5.2 kb) (DHCPRELAY) [N/y/?] n udhcpc (24 kb) (UDHCPC) [Y/n/?] y Verify that the offered address is free, using ARP ping (FEATURE_UDHCPC_ARPING) [Y/n/?] y Do not pass malformed host and domain names (FEATURE_UDHCPC_SANITIZEOPT) [Y/n/?] y Absolute path to config script (UDHCPC_DEFAULT_SCRIPT) [/usr/share/udhcpc/default.script] /usr/share/udhcpc/default.script udhcpc6 (21 kb) (UDHCPC6) [N/y/?] n * * Common options for DHCP applets * Enable '-P port' option for udhcpd and udhcpc (FEATURE_UDHCP_PORT) [N/y/?] n Maximum verbosity level (0..9) (UDHCP_DEBUG) [0] 0 DHCP options slack buffer size (UDHCPC_SLACK_FOR_BUGGY_SERVERS) [80] 80 Support RFC 3397 domain search options (FEATURE_UDHCP_RFC3397) [N/y/?] n Support 802.1Q VLAN parameters options (FEATURE_UDHCP_8021Q) [Y/n/?] y ifup udhcpc command line options (IFUPDOWN_UDHCPC_CMD_OPTIONS) [-R -n] -R -n * * Print Utilities * lpd (5.5 kb) (LPD) [N/y/?] n lpr (9.9 kb) (LPR) [N/y/?] n lpq (9.9 kb) (LPQ) [N/y/?] n * * Mail Utilities * makemime (5.4 kb) (MAKEMIME) [N/y/?] n popmaildir (10 kb) (POPMAILDIR) [N/y/?] n reformime (7.5 kb) (REFORMIME) [N/y/?] n sendmail (14 kb) (SENDMAIL) [N/y/?] n * * Process Utilities * free (3.1 kb) (FREE) [Y/n/?] y fuser (7 kb) (FUSER) [Y/n/?] y iostat (7.6 kb) (IOSTAT) [N/y/?] n kill (3.1 kb) (KILL) [Y/n/?] y killall (5.6 kb) (KILLALL) [Y/n/?] y killall5 (5.3 kb) (KILLALL5) [Y/n/?] y lsof (3.4 kb) (LSOF) [Y/n/?] y mpstat (9.8 kb) (MPSTAT) [N/y/?] n nmeter (11 kb) (NMETER) [N/y/?] n pgrep (6.5 kb) (PGREP) [N/y/?] n pkill (7.5 kb) (PKILL) [N/y/?] n pidof (6.3 kb) (PIDOF) [Y/n/?] y Enable single shot (-s) (FEATURE_PIDOF_SINGLE) [Y/n/?] y Enable omitting pids (-o PID) (FEATURE_PIDOF_OMIT) [Y/n/?] y pmap (6 kb) (PMAP) [N/y/?] n powertop (9.6 kb) (POWERTOP) [N/y/?] n ps (11 kb) (PS) [Y/n/?] y Enable -o time and -o etime specifiers (FEATURE_PS_TIME) [N/y] n Enable -o rgroup, -o ruser, -o nice specifiers (FEATURE_PS_ADDITIONAL_COLUMNS) [N/y] n pstree (9.3 kb) (PSTREE) [N/y/?] n pwdx (3.7 kb) (PWDX) [N/y/?] n smemcap (2.5 kb) (SMEMCAP) [N/y/?] n sysctl (7.4 kb) (BB_SYSCTL) [Y/n/?] y top (18 kb) (TOP) [Y/n/?] y Accept keyboard commands (FEATURE_TOP_INTERACTIVE) [Y/n/?] y Show CPU per-process usage percentage (FEATURE_TOP_CPU_USAGE_PERCENTAGE) [Y/n/?] y Show CPU global usage percentage (FEATURE_TOP_CPU_GLOBAL_PERCENTS) [Y/n/?] y SMP CPU usage display ('c' key) (FEATURE_TOP_SMP_CPU) [N/y/?] n Show 1/10th of a percent in CPU/mem statistics (FEATURE_TOP_DECIMALS) [N/y/?] n Show CPU process runs on ('j' field) (FEATURE_TOP_SMP_PROCESS) [N/y/?] n Topmem command ('s' key) (FEATURE_TOPMEM) [N/y/?] n uptime (3.7 kb) (UPTIME) [Y/n/?] y Show the number of users (FEATURE_UPTIME_UTMP_SUPPORT) [N/y/?] n watch (4.4 kb) (WATCH) [Y/n/?] y Support thread display in ps/pstree/top (FEATURE_SHOW_THREADS) [N/y/?] n * * Runit Utilities * chpst (9 kb) (CHPST) [N/y/?] n setuidgid (4 kb) (SETUIDGID) [N/y/?] n envuidgid (3.9 kb) (ENVUIDGID) [N/y/?] n envdir (2.5 kb) (ENVDIR) [N/y/?] n softlimit (4.5 kb) (SOFTLIMIT) [N/y/?] n runsv (7.8 kb) (RUNSV) [N/y/?] n runsvdir (6.3 kb) (RUNSVDIR) [N/y/?] n sv (8.5 kb) (SV) [N/y/?] n Default directory for services (SV_DEFAULT_SERVICE_DIR) [] svc (8.4 kb) (SVC) [Y/n/?] y svok (1.5 kb) (SVOK) [Y/n/?] y svlogd (16 kb) (SVLOGD) [N/y/?] n * * Shells * Choose which shell is aliased to 'sh' name > 1. ash (SH_IS_ASH) 2. hush (SH_IS_HUSH) 3. none (SH_IS_NONE) choice[1-3?]: 1 Choose which shell is aliased to 'bash' name 1. ash (BASH_IS_ASH) 2. hush (BASH_IS_HUSH) > 3. none (BASH_IS_NONE) choice[1-3?]: 3 ash (78 kb) (ASH) [Y/n/?] y Optimize for size instead of speed (ASH_OPTIMIZE_FOR_SIZE) [Y/n] y Use internal glob() implementation (ASH_INTERNAL_GLOB) [Y/n/?] y bash-compatible extensions (ASH_BASH_COMPAT) [Y/n] y 'source' and '.' builtins search current directory after $PATH (ASH_BASH_SOURCE_CURDIR) [N/y/?] n command_not_found_handle hook support (ASH_BASH_NOT_FOUND_HOOK) [Y/n/?] y Job control (ASH_JOB_CONTROL) [Y/n] y Alias support (ASH_ALIAS) [Y/n] y Pseudorandom generator and $RANDOM variable (ASH_RANDOM_SUPPORT) [Y/n/?] y Expand prompt string (ASH_EXPAND_PRMT) [Y/n/?] y Idle timeout variable $TMOUT (ASH_IDLE_TIMEOUT) [Y/n/?] y Check for new mail in interactive shell (ASH_MAIL) [N/y/?] n echo builtin (ASH_ECHO) [Y/n] y printf builtin (ASH_PRINTF) [Y/n] y test builtin (ASH_TEST) [Y/n] y help builtin (ASH_HELP) [Y/n] y getopts builtin (ASH_GETOPTS) [Y/n] y command builtin (ASH_CMDCMD) [Y/n/?] y cttyhack (2.4 kb) (CTTYHACK) [N/y/?] n hush (68 kb) (HUSH) [N/y/?] n * * Options common to all shells * POSIX math support (FEATURE_SH_MATH) [Y/n/?] y Extend POSIX math support to 64 bit (FEATURE_SH_MATH_64) [Y/n/?] y Hide message on interactive shell startup (FEATURE_SH_EXTRA_QUIET) [Y/n/?] y Standalone shell (FEATURE_SH_STANDALONE) [N/y/?] n Run 'nofork' applets directly (FEATURE_SH_NOFORK) [N/y/?] n read -t N.NNN support (+110 bytes) (FEATURE_SH_READ_FRAC) [Y/n/?] y Use $HISTFILESIZE (FEATURE_SH_HISTFILESIZE) [N/y/?] n Embed scripts in the binary (FEATURE_SH_EMBEDDED_SCRIPTS) [Y/n/?] y * * System Logging Utilities * klogd (5.7 kb) (KLOGD) [Y/n/?] y Use the klogctl() interface (FEATURE_KLOGD_KLOGCTL) [Y/n/?] y logger (6.3 kb) (LOGGER) [Y/n/?] y logread (4.8 kb) (LOGREAD) [N/y/?] n syslogd (13 kb) (SYSLOGD) [Y/n/?] y Rotate message files (FEATURE_ROTATE_LOGFILE) [Y/n/?] y Remote Log support (FEATURE_REMOTE_LOG) [Y/n/?] y Support -D (drop dups) option (FEATURE_SYSLOGD_DUP) [N/y/?] n Support syslog.conf (FEATURE_SYSLOGD_CFG) [N/y/?] n Read buffer size in bytes (FEATURE_SYSLOGD_READ_BUFFER_SIZE) [256] 256 Circular Buffer support (FEATURE_IPC_SYSLOG) [N/y/?] n Linux kernel printk buffer support (FEATURE_KMSG_SYSLOG) [N/y/?] n make[1]: Leaving directory '/home/peko/autobuild/instance-0/output/build/busybox-1.30.1' yes: standard output: Broken pipe >>> busybox 1.30.1 Configuring >>> busybox 1.30.1 Building PATH="/home/peko/autobuild/instance-0/output/host/bin:/home/peko/autobuild/instance-0/output/host/sbin:/home/peko/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/home/peko/bin:/home/peko/bin" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os "`/home/peko/autobuild/instance-0/output/host/bin/pkg-config --cflags libtirpc`"" CFLAGS_busybox=""`/home/peko/autobuild/instance-0/output/host/bin/pkg-config --libs libtirpc`"" /usr/bin/make -j6 CC="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc" ARCH=arm PREFIX="/home/peko/autobuild/instance-0/output/target" EXTRA_LDFLAGS="" CROSS_COMPILE="/home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-" CONFIG_PREFIX="/home/peko/autobuild/instance-0/output/target" SKIP_STRIP=y -C /home/peko/autobuild/instance-0/output/build/busybox-1.30.1 make[1]: Entering directory '/home/peko/autobuild/instance-0/output/build/busybox-1.30.1' HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/split-include HOSTCC scripts/basic/docproc SPLIT include/autoconf.h -> include/config/* GEN include/bbconfigopts.h GEN include/common_bufsiz.h GEN include/embedded_scripts.h HOSTCC applets/usage HOSTCC applets/applet_tables GEN include/usage_compressed.h GEN include/applet_tables.h include/NUM_APPLETS.h GEN include/applet_tables.h include/NUM_APPLETS.h CC applets/applets.o HOSTCC applets/usage_pod LD applets/built-in.o DOC busybox.pod DOC BusyBox.txt DOC busybox.1 DOC BusyBox.html LD archival/built-in.o CC archival/ar.o CC archival/bbunzip.o CC archival/cpio.o LD archival/libarchive/built-in.o LD console-tools/built-in.o CC console-tools/chvt.o CC archival/libarchive/common.o CC archival/libarchive/data_align.o CC archival/gzip.o CC console-tools/clear.o CC archival/libarchive/data_extract_all.o CC archival/libarchive/data_extract_to_command.o CC archival/libarchive/data_extract_to_stdout.o CC archival/libarchive/data_skip.o CC console-tools/deallocvt.o CC console-tools/dumpkmap.o CC console-tools/loadfont.o CC archival/lzop.o CC archival/libarchive/decompress_bunzip2.o CC archival/libarchive/decompress_gunzip.o CC archival/libarchive/decompress_unlzma.o CC console-tools/loadkmap.o CC console-tools/openvt.o CC console-tools/reset.o CC console-tools/resize.o CC console-tools/setconsole.o CC archival/tar.o CC archival/unzip.o CC archival/libarchive/decompress_unxz.o CC archival/libarchive/filter_accept_all.o CC console-tools/setkeycodes.o CC console-tools/setlogcons.o LD coreutils/built-in.o CC coreutils/basename.o LD coreutils/libcoreutils/built-in.o AR console-tools/lib.a CC coreutils/libcoreutils/cp_mv_stat.o CC coreutils/libcoreutils/getopt_mk_fifo_nod.o CC archival/libarchive/filter_accept_list.o AR archival/lib.a CC archival/libarchive/filter_accept_reject_list.o CC archival/libarchive/find_list_entry.o CC coreutils/cat.o AR coreutils/libcoreutils/lib.a CC coreutils/chgrp.o CC coreutils/chmod.o CC coreutils/chown.o CC coreutils/chroot.o CC archival/libarchive/get_header_ar.o CC archival/libarchive/get_header_cpio.o CC archival/libarchive/get_header_tar.o CC archival/libarchive/header_list.o CC coreutils/cksum.o CC coreutils/cp.o CC coreutils/cut.o CC coreutils/date.o CC coreutils/dd.o CC archival/libarchive/header_skip.o CC archival/libarchive/header_verbose_list.o LD debianutils/built-in.o CC debianutils/pipe_progress.o CC debianutils/run_parts.o CC debianutils/start_stop_daemon.o LD klibc-utils/built-in.o CC klibc-utils/nuke.o CC archival/libarchive/init_handle.o CC archival/libarchive/lzo1x_1.o CC coreutils/df.o CC coreutils/dirname.o CC klibc-utils/resume.o CC coreutils/dos2unix.o CC archival/libarchive/lzo1x_1o.o CC archival/libarchive/lzo1x_d.o CC archival/libarchive/open_transformer.o CC debianutils/which.o AR klibc-utils/lib.a CC coreutils/du.o CC archival/libarchive/seek_by_jump.o CC coreutils/echo.o AR debianutils/lib.a CC coreutils/env.o CC coreutils/expr.o CC coreutils/factor.o CC archival/libarchive/seek_by_read.o CC archival/libarchive/unpack_ar_archive.o LD e2fsprogs/built-in.o CC e2fsprogs/chattr.o CC e2fsprogs/e2fs_lib.o CC coreutils/false.o CC e2fsprogs/fsck.o CC archival/libarchive/unsafe_prefix.o CC archival/libarchive/unsafe_symlink_target.o CC coreutils/fold.o CC e2fsprogs/lsattr.o CC coreutils/head.o CC coreutils/hostid.o AR archival/libarchive/lib.a CC coreutils/id.o CC coreutils/install.o LD editors/built-in.o CC editors/awk.o CC editors/cmp.o CC editors/diff.o CC editors/patch.o AR e2fsprogs/lib.a CC editors/sed.o CC coreutils/link.o CC coreutils/ln.o CC editors/vi.o CC coreutils/logname.o CC coreutils/ls.o CC coreutils/md5_sha1_sum.o CC coreutils/mkdir.o LD findutils/built-in.o CC findutils/find.o CC findutils/grep.o CC findutils/xargs.o CC coreutils/mkfifo.o CC coreutils/mknod.o CC coreutils/mktemp.o LD init/built-in.o CC init/halt.o AR findutils/lib.a CC init/init.o CC coreutils/mv.o CC coreutils/nice.o LD libbb/built-in.o CC libbb/appletlib.o CC libbb/ask_confirmation.o CC libbb/auto_string.o CC coreutils/nl.o CC coreutils/nohup.o AR init/lib.a CC coreutils/nproc.o LD libpwdgrp/built-in.o AR editors/lib.a CC libpwdgrp/uidgid_get.o CC coreutils/od.o LD loginutils/built-in.o CC loginutils/addgroup.o CC loginutils/adduser.o CC loginutils/cryptpw.o CC libbb/bb_askpass.o AR libpwdgrp/lib.a CC libbb/bb_bswap_64.o CC libbb/bb_cat.o CC libbb/bb_do_delay.o CC loginutils/deluser.o CC coreutils/paste.o CC coreutils/printenv.o CC coreutils/printf.o CC libbb/bb_getgroups.o CC libbb/bb_getsockname.o CC loginutils/getty.o CC loginutils/login.o CC loginutils/passwd.o CC loginutils/su.o CC libbb/bb_pwd.o CC coreutils/pwd.o CC coreutils/readlink.o LD mailutils/built-in.o AR mailutils/lib.a CC loginutils/sulogin.o CC loginutils/vlock.o LD miscutils/built-in.o CC miscutils/bc.o CC libbb/bb_qsort.o CC miscutils/crond.o CC coreutils/realpath.o CC coreutils/rm.o AR loginutils/lib.a CC coreutils/rmdir.o CC libbb/bb_strtonum.o CC libbb/capability.o CC libbb/change_identity.o CC coreutils/seq.o CC libbb/chomp.o CC coreutils/shred.o CC coreutils/sleep.o CC coreutils/sort.o CC libbb/common_bufsiz.o CC libbb/compare_string_array.o CC libbb/concat_path_file.o CC libbb/concat_subpath_file.o CC coreutils/stty.o CC coreutils/sync.o CC coreutils/tail.o CC libbb/copy_file.o CC libbb/copyfd.o CC libbb/correct_password.o CC coreutils/tee.o CC miscutils/crontab.o CC miscutils/devmem.o CC libbb/crc32.o CC libbb/default_error_retval.o CC coreutils/test.o CC coreutils/test_ptr_hack.o CC coreutils/touch.o CC libbb/device_open.o CC libbb/dump.o CC libbb/duration.o CC libbb/endofname.o CC coreutils/tr.o CC libbb/executable.o CC coreutils/true.o CC coreutils/truncate.o CC libbb/fclose_nonstdin.o CC coreutils/tty.o CC libbb/fflush_stdout_and_exit.o CC coreutils/uname.o CC libbb/fgets_str.o CC miscutils/hdparm.o CC coreutils/uniq.o CC libbb/find_mount_point.o CC libbb/find_pid_by_name.o CC coreutils/unlink.o CC libbb/find_root_device.o CC coreutils/usleep.o CC miscutils/hexedit.o CC miscutils/i2c_tools.o CC coreutils/uudecode.o CC libbb/full_write.o miscutils/i2c_tools.c: In function 'list_i2c_busses_and_exit': miscutils/i2c_tools.c:1142:32: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 236 [-Wformat-truncation=] snprintf(path, NAME_MAX, "%s/%s/name", ^~ miscutils/i2c_tools.c:1142:3: note: 'snprintf' output between 25 and 280 bytes into a destination of size 255 snprintf(path, NAME_MAX, "%s/%s/name", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ i2cdev_path, de->d_name); ~~~~~~~~~~~~~~~~~~~~~~~~ miscutils/i2c_tools.c:1147:10: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 236 [-Wformat-truncation=] "%s/%s/device/name", ^~ miscutils/i2c_tools.c:1146:4: note: 'snprintf' output between 32 and 287 bytes into a destination of size 255 snprintf(path, NAME_MAX, ^~~~~~~~~~~~~~~~~~~~~~~~ "%s/%s/device/name", ~~~~~~~~~~~~~~~~~~~~ i2cdev_path, de->d_name); ~~~~~~~~~~~~~~~~~~~~~~~~ miscutils/i2c_tools.c:1155:10: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 236 [-Wformat-truncation=] "%s/%s/device/name", ^~ miscutils/i2c_tools.c:1154:4: note: 'snprintf' output between 32 and 287 bytes into a destination of size 255 snprintf(path, NAME_MAX, ^~~~~~~~~~~~~~~~~~~~~~~~ "%s/%s/device/name", ~~~~~~~~~~~~~~~~~~~~ i2cdev_path, de->d_name); ~~~~~~~~~~~~~~~~~~~~~~~~ miscutils/i2c_tools.c:1167:12: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 236 [-Wformat-truncation=] "%s/%s/device/%s/name", ^~ miscutils/i2c_tools.c:1166:6: note: 'snprintf' output between 33 and 543 bytes into a destination of size 255 snprintf(path, NAME_MAX, ^~~~~~~~~~~~~~~~~~~~~~~~ "%s/%s/device/%s/name", ~~~~~~~~~~~~~~~~~~~~~~~ i2cdev_path, de->d_name, ~~~~~~~~~~~~~~~~~~~~~~~~ subde->d_name); ~~~~~~~~~~~~~~ CC libbb/get_console.o CC miscutils/less.o CC coreutils/uuencode.o CC coreutils/wc.o CC miscutils/lsscsi.o CC libbb/get_last_path_component.o CC libbb/get_line_from_file.o CC coreutils/who.o CC coreutils/whoami.o CC coreutils/yes.o CC libbb/get_shell_name.o CC libbb/get_volsize.o CC libbb/getopt32.o CC libbb/getopt_allopts.o AR coreutils/lib.a CC miscutils/makedevs.o CC miscutils/microcom.o LD modutils/built-in.o CC modutils/insmod.o CC libbb/getpty.o CC libbb/hash_md5_sha.o CC libbb/herror_msg.o CC miscutils/mt.o CC miscutils/partprobe.o CC modutils/lsmod.o CC modutils/modprobe.o LD networking/built-in.o CC networking/arp.o CC networking/arping.o CC miscutils/runlevel.o CC miscutils/setfattr.o CC modutils/modutils.o CC miscutils/setserial.o CC miscutils/strings.o CC miscutils/time.o CC libbb/human_readable.o CC networking/dnsd.o CC networking/ether-wake.o CC modutils/rmmod.o CC networking/hostname.o CC miscutils/ubirename.o CC libbb/in_ether.o CC libbb/inet_cksum.o CC libbb/inet_common.o AR modutils/lib.a CC miscutils/watchdog.o CC networking/ifconfig.o CC networking/ifupdown.o LD networking/libiproute/built-in.o CC networking/libiproute/ip_parse_common_args.o CC networking/libiproute/ipaddress.o CC libbb/inode_hash.o AR miscutils/lib.a CC libbb/isdirectory.o CC libbb/isqrt.o CC libbb/kernel_version.o CC networking/inetd.o CC networking/interface.o CC networking/ip.o CC libbb/last_char_is.o CC libbb/lineedit.o CC networking/nameif.o CC libbb/lineedit_ptr_hack.o CC networking/libiproute/iplink.o CC networking/libiproute/ipneigh.o CC networking/libiproute/iproute.o CC networking/libiproute/iprule.o CC networking/netstat.o CC networking/nslookup.o CC networking/parse_pasv_epsv.o CC networking/ping.o CC networking/libiproute/iptunnel.o LD networking/udhcp/built-in.o CC networking/udhcp/arpping.o LD printutils/built-in.o AR printutils/lib.a CC networking/route.o CC networking/udhcp/common.o CC libbb/llist.o CC libbb/login.o CC networking/libiproute/libnetlink.o CC networking/libiproute/ll_addr.o CC networking/libiproute/ll_map.o CC libbb/loop.o CC networking/udhcp/dhcpc.o CC networking/tc.o CC networking/telnet.o CC libbb/make_directory.o CC libbb/makedev.o CC networking/libiproute/ll_proto.o CC networking/libiproute/ll_types.o CC libbb/match_fstype.o CC libbb/messages.o CC networking/libiproute/rt_names.o CC networking/tftp.o CC networking/traceroute.o CC networking/libiproute/rtm_map.o CC libbb/missing_syscalls.o CC libbb/mode_string.o CC networking/udhcp/packet.o CC networking/udhcp/signalpipe.o CC networking/libiproute/utils.o CC networking/udhcp/socket.o CC networking/vconfig.o CC libbb/nuke_str.o CC libbb/obscure.o LD procps/built-in.o CC procps/free.o CC networking/wget.o AR networking/udhcp/lib.a CC procps/fuser.o AR networking/libiproute/lib.a CC procps/kill.o CC procps/lsof.o CC libbb/parse_config.o CC libbb/parse_mode.o CC libbb/percent_decode.o CC libbb/perror_msg.o CC procps/pidof.o CC procps/ps.o CC procps/sysctl.o CC procps/top.o CC libbb/perror_nomsg.o CC procps/uptime.o AR networking/lib.a CC procps/watch.o CC libbb/perror_nomsg_and_die.o CC libbb/pidfile.o CC libbb/platform.o CC libbb/print_flags.o CC libbb/print_numbered_lines.o CC libbb/printable.o AR procps/lib.a LD runit/built-in.o CC runit/sv.o CC libbb/printable_string.o LD selinux/built-in.o AR selinux/lib.a LD shell/built-in.o CC shell/ash.o CC libbb/process_escape_sequence.o CC shell/ash_ptr_hack.o CC shell/math.o CC libbb/procps.o CC shell/random.o CC shell/shell_common.o CC libbb/progress.o CC libbb/ptr_to_globals.o CC libbb/pw_encrypt.o LD sysklogd/built-in.o CC sysklogd/klogd.o AR runit/lib.a CC sysklogd/syslogd_and_logger.o LD util-linux/built-in.o CC util-linux/blkid.o CC util-linux/chrt.o CC util-linux/dmesg.o LD util-linux/volume_id/built-in.o CC util-linux/volume_id/exfat.o CC util-linux/volume_id/ext.o CC util-linux/eject.o CC libbb/read.o AR sysklogd/lib.a CC libbb/read_key.o CC libbb/read_printf.o CC util-linux/volume_id/f2fs.o CC util-linux/fallocate.o CC util-linux/fbset.o CC util-linux/fdformat.o CC libbb/recursive_action.o CC util-linux/volume_id/fat.o CC util-linux/volume_id/get_devname.o CC util-linux/volume_id/minix.o CC libbb/remove_file.o CC libbb/replace.o CC util-linux/fdisk.o CC util-linux/flock.o CC util-linux/volume_id/ubifs.o CC util-linux/volume_id/util.o CC libbb/rtc.o CC util-linux/freeramdisk.o CC libbb/run_shell.o CC util-linux/fsfreeze.o CC util-linux/volume_id/volume_id.o CC libbb/safe_gethostname.o CC util-linux/fstrim.o CC libbb/safe_poll.o AR util-linux/volume_id/lib.a CC libbb/safe_strncpy.o CC libbb/safe_write.o CC util-linux/getopt.o CC util-linux/hexdump.o CC util-linux/hexdump_xxd.o CC libbb/securetty.o CC libbb/setup_environment.o CC libbb/signals.o CC libbb/simplify_path.o CC util-linux/hwclock.o CC util-linux/ipcrm.o CC util-linux/ipcs.o CC libbb/single_argv.o CC libbb/skip_whitespace.o CC libbb/speed_table.o CC util-linux/last.o CC libbb/str_tolower.o CC util-linux/losetup.o CC util-linux/lspci.o CC libbb/strrstr.o CC util-linux/lsusb.o CC libbb/sysconf.o CC libbb/time.o CC libbb/trim.o CC util-linux/mdev.o CC libbb/u_signal_names.o CC util-linux/mesg.o CC util-linux/mkfs_ext2.o CC libbb/ubi.o CC util-linux/mkfs_vfat.o CC libbb/udp_io.o CC util-linux/mkswap.o CC libbb/update_passwd.o CC libbb/utmp.o CC libbb/uuencode.o CC util-linux/more.o CC libbb/verror_msg.o CC util-linux/mount.o CC libbb/vfork_daemon_rexec.o CC util-linux/mountpoint.o CC util-linux/pivot_root.o CC util-linux/rdate.o AR shell/lib.a CC util-linux/readprofile.o CC util-linux/renice.o CC libbb/warn_ignoring_args.o CC libbb/wfopen.o CC libbb/wfopen_input.o CC util-linux/setarch.o CC util-linux/setpriv.o CC libbb/write.o CC util-linux/setsid.o CC libbb/xatonum.o CC libbb/xconnect.o CC libbb/xfunc_die.o CC util-linux/swaponoff.o CC util-linux/switch_root.o CC libbb/xfuncs.o CC libbb/xfuncs_printf.o CC util-linux/uevent.o CC libbb/xgetcwd.o CC util-linux/umount.o CC libbb/xgethostbyname.o CC libbb/xreadlink.o CC libbb/xrealloc_vector.o CC libbb/xregcomp.o AR util-linux/lib.a AR libbb/lib.a LINK busybox_unstripped Trying libraries: crypt m pam pam_misc resolv Library crypt is not needed, excluding it Library m is not needed, excluding it Library pam is needed, can't exclude it (yet) Library pam_misc is needed, can't exclude it (yet) Library resolv is not needed, excluding it Library pam is needed, can't exclude it (yet) Library pam_misc is needed, can't exclude it (yet) Final link with: pam pam_misc libbusybox: 0_lib/libbusybox.so.1.30.1 Linking individual applets against libbusybox (see 0_lib/*) 0_lib/ar 0_lib/gunzip 0_lib/zcat 0_lib/bunzip2 0_lib/bzcat 0_lib/unlzma 0_lib/lzcat 0_lib/lzma 0_lib/unxz 0_lib/xzcat 0_lib/xz 0_lib/cpio 0_lib/gzip 0_lib/unlzop 0_lib/lzopcat 0_lib/tar 0_lib/unzip 0_lib/chvt 0_lib/clear 0_lib/deallocvt 0_lib/dumpkmap 0_lib/loadfont 0_lib/loadkmap 0_lib/openvt 0_lib/reset 0_lib/resize 0_lib/setconsole 0_lib/setkeycodes 0_lib/setlogcons 0_lib/basename 0_lib/cat 0_lib/chgrp 0_lib/chmod 0_lib/chown 0_lib/chroot 0_lib/cksum 0_lib/cp 0_lib/cut 0_lib/date 0_lib/dd 0_lib/df 0_lib/dirname 0_lib/dos2unix 0_lib/unix2dos 0_lib/du 0_lib/echo 0_lib/env 0_lib/expr 0_lib/factor 0_lib/false 0_lib/fold 0_lib/head 0_lib/hostid 0_lib/id 0_lib/install 0_lib/link 0_lib/ln 0_lib/logname 0_lib/ls 0_lib/md5sum 0_lib/sha1sum 0_lib/sha3sum 0_lib/sha256sum 0_lib/sha512sum 0_lib/mkdir 0_lib/mkfifo 0_lib/mknod 0_lib/mktemp 0_lib/mv 0_lib/nice 0_lib/nl 0_lib/nohup 0_lib/nproc 0_lib/od 0_lib/paste 0_lib/printenv 0_lib/printf 0_lib/pwd 0_lib/readlink 0_lib/realpath 0_lib/rm 0_lib/rmdir 0_lib/seq 0_lib/shred 0_lib/sleep 0_lib/sort 0_lib/stty 0_lib/sync 0_lib/tail 0_lib/tee 0_lib/test 0_lib/[ 0_lib/[[ 0_lib/touch 0_lib/tr 0_lib/true 0_lib/truncate 0_lib/tty 0_lib/uname 0_lib/arch 0_lib/uniq 0_lib/unlink 0_lib/usleep 0_lib/uudecode 0_lib/uuencode 0_lib/wc 0_lib/w 0_lib/who 0_lib/whoami 0_lib/yes 0_lib/pipe_progress 0_lib/run-parts 0_lib/start-stop-daemon 0_lib/which 0_lib/chattr 0_lib/fsck 0_lib/lsattr 0_lib/awk 0_lib/cmp 0_lib/diff 0_lib/patch 0_lib/sed 0_lib/vi 0_lib/find 0_lib/grep 0_lib/egrep 0_lib/fgrep 0_lib/xargs 0_lib/halt 0_lib/poweroff 0_lib/reboot 0_lib/init 0_lib/linuxrc 0_lib/nuke 0_lib/resume 0_lib/addgroup 0_lib/adduser 0_lib/mkpasswd 0_lib/deluser 0_lib/delgroup 0_lib/getty 0_lib/login 0_lib/passwd 0_lib/su 0_lib/sulogin 0_lib/vlock 0_lib/bc 0_lib/dc 0_lib/crond 0_lib/crontab 0_lib/devmem 0_lib/hdparm 0_lib/hexedit 0_lib/i2cget 0_lib/i2cset 0_lib/i2cdump 0_lib/i2cdetect 0_lib/less 0_lib/lsscsi 0_lib/makedevs 0_lib/microcom 0_lib/mt 0_lib/partprobe 0_lib/runlevel 0_lib/setfattr 0_lib/setserial 0_lib/strings 0_lib/time 0_lib/ubirename 0_lib/watchdog 0_lib/insmod 0_lib/lsmod 0_lib/modprobe 0_lib/rmmod 0_lib/arp 0_lib/arping 0_lib/dnsd 0_lib/ether-wake 0_lib/dnsdomainname 0_lib/hostname 0_lib/ifconfig 0_lib/ifup 0_lib/ifdown 0_lib/inetd 0_lib/ip 0_lib/ipaddr 0_lib/iplink 0_lib/iproute 0_lib/iprule 0_lib/iptunnel 0_lib/ipneigh 0_lib/nameif 0_lib/netstat 0_lib/nslookup 0_lib/ping 0_lib/route 0_lib/tc 0_lib/telnet 0_lib/tftp 0_lib/traceroute 0_lib/vconfig 0_lib/wget 0_lib/free 0_lib/fuser 0_lib/kill 0_lib/killall 0_lib/killall5 0_lib/lsof 0_lib/pidof 0_lib/ps 0_lib/sysctl 0_lib/top 0_lib/uptime 0_lib/watch 0_lib/svc 0_lib/svok 0_lib/ash 0_lib/sh 0_lib/klogd 0_lib/logger 0_lib/syslogd 0_lib/blkid 0_lib/chrt 0_lib/dmesg 0_lib/eject 0_lib/fallocate 0_lib/fbset 0_lib/fdformat 0_lib/fdisk 0_lib/flock 0_lib/fdflush 0_lib/freeramdisk 0_lib/fsfreeze 0_lib/fstrim 0_lib/getopt 0_lib/hexdump 0_lib/xxd 0_lib/hwclock 0_lib/ipcrm 0_lib/ipcs 0_lib/last 0_lib/losetup 0_lib/lspci 0_lib/lsusb 0_lib/mdev 0_lib/mesg 0_lib/mke2fs 0_lib/mkdosfs 0_lib/mkswap 0_lib/more 0_lib/mount 0_lib/mountpoint Linking 0_lib/nologin failed Output of: /home/peko/autobuild/instance-0/output/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -I/home/peko/autobuild/instance-0/output/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/tirpc -Wall -Wshadow -Wwrite-strings -Wundef -Wstrict-prototypes -Wunused -Wunused-parameter -Wunused-function -Wunused-value -Wmissing-prototypes -Wmissing-declarations -Wno-format-security -Wdeclaration-after-statement -Wold-style-definition -fno-builtin-strlen -finline-limit=0 -fomit-frame-pointer -ffunction-sections -fdata-sections -fno-guess-branch-probability -funsigned-char -static-libgcc -falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1 -fno-unwind-tables -fno-asynchronous-unwind-tables -fno-builtin-printf -Os -fpic -fvisibility=hidden -L/home/peko/autobuild/instance-0/output/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -ltirpc 0_lib/applet.c -o 0_lib/nologin -Wl,--sort-common -Wl,--sort-section,alignment -Wl,--gc-sections -L0_lib -lbusybox -Wl,--warn-common ========== /home/peko/autobuild/instance-0/output/host/lib/gcc/arm-buildroot-linux-uclibcgnueabi/7.4.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /tmp/ccMgHKFh.o: in function `main': applet.c:(.text.main+0x24): undefined reference to `scripted_main' collect2: error: ld returned 1 exit status Makefile:718: recipe for target 'busybox_unstripped' failed make[1]: *** [busybox_unstripped] Error 1 make[1]: Leaving directory '/home/peko/autobuild/instance-0/output/build/busybox-1.30.1' package/pkg-generic.mk:238: recipe for target '/home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.stamp_built' failed make: *** [/home/peko/autobuild/instance-0/output/build/busybox-1.30.1/.stamp_built] Error 2 make: Leaving directory '/home/peko/autobuild/instance-0/buildroot'