exec ./tools/install.sh -D -m 600 s6-clockadd /home/buildroot/build/instance-3/output/target/usr/bin/s6-clockadd
exec ./tools/install.sh -D -m 600 s6-clockview /home/buildroot/build/instance-3/output/target/usr/bin/s6-clockview
grep -- ^s6-tcpserver6 < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/s6-tcpserver6 ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/s6-tcpserver6 ; }
grep -- ^s6-tcpserver-access < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/s6-tcpserver-access ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/s6-tcpserver-access ; }
exec ./tools/install.sh -D -m 600 s6-sntpclock /home/buildroot/build/instance-3/output/target/usr/bin/s6-sntpclock
exec ./tools/install.sh -D -m 600 s6-taiclock /home/buildroot/build/instance-3/output/target/usr/bin/s6-taiclock
exec ./tools/install.sh -D -m 600 s6-taiclockd /home/buildroot/build/instance-3/output/target/usr/bin/s6-taiclockd
grep -- ^s6-tcpserver6-socketbinder < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/s6-tcpserver6-socketbinder ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/s6-tcpserver6-socketbinder ; }
grep -- ^s6-tcpserver6d < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/s6-tcpserver6d ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/s6-tcpserver6d ; }
exec ./tools/install.sh -D -m 600 minidentd /home/buildroot/build/instance-3/output/target/usr/bin/minidentd
grep -- ^s6-taiclockd < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/s6-taiclockd ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/s6-taiclockd ; }
exec ./tools/install.sh -D -m 644 src/include/s6-networking/stls.h /home/buildroot/build/instance-3/output/target/usr/include/s6-networking/stls.h
grep -- ^s6-clockadd < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/s6-clockadd ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/s6-clockadd ; }
grep -- ^s6-sntpclock < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/s6-sntpclock ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/s6-sntpclock ; }
exec ./tools/install.sh -D -m 644 src/include/s6-networking/sbearssl.h /home/buildroot/build/instance-3/output/target/usr/include/s6-networking/sbearssl.h
grep -- ^minidentd < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/minidentd ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/minidentd ; }
exec ./tools/install.sh -D -m 644 src/include/s6-networking/config.h /home/buildroot/build/instance-3/output/target/usr/include/s6-networking/config.h
grep -- ^s6-taiclock < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/s6-taiclock ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/s6-taiclock ; }
exec ./tools/install.sh -D -m 644 src/include/s6-networking/ident.h /home/buildroot/build/instance-3/output/target/usr/include/s6-networking/ident.h
grep -- ^s6-clockview < package/modes | { read name mode owner && \
if [ x$owner != x ] ; then chown -- $owner /home/buildroot/build/instance-3/output/target/usr/bin/s6-clockview ; fi && \
chmod $mode /home/buildroot/build/instance-3/output/target/usr/bin/s6-clockview ; }
exec ./tools/install.sh -D -m 644 src/include/s6-networking/s6net.h /home/buildroot/build/instance-3/output/target/usr/include/s6-networking/s6net.h
make[1]: Leaving directory '/home/buildroot/build/instance-3/output/build/s6-networking-2.3.0.2'
rm -rf /home/buildroot/build/instance-3/output/target/usr/lib/s6-networking
shapelib-1.4.1.tar.gz: OK (sha256: a4c94817365761a3a4c21bb3ca1c680a6bdfd3edd61df9fdd291d3e7645923b3)
>>> shapelib 1.4.1 Extracting
gzip -d -c /home/buildroot/build/instance-3/dl/shapelib/shapelib-1.4.1.tar.gz | tar --strip-components=1 -C /home/buildroot/build/instance-3/output/build/shapelib-1.4.1   -xf -
>>> shapelib 1.4.1 Patching
>>> shapelib 1.4.1 Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /home/buildroot/build/instance-3/output/build/shapelib-1.4.1 -name $file); do cp support/gnuconfig/$file $i; done; done
>>> shapelib 1.4.1 Patching libtool
patching file /home/buildroot/build/instance-3/output/build/shapelib-1.4.1/ltmain.sh
Hunk #1 succeeded at 2694 (offset 7 lines).
Hunk #2 succeeded at 4284 (offset 7 lines).
Hunk #3 succeeded at 6579 (offset 25 lines).
Hunk #4 succeeded at 6589 (offset 25 lines).
Hunk #5 succeeded at 6882 (offset 25 lines).
Hunk #6 succeeded at 7174 (offset 25 lines).
Hunk #7 succeeded at 8146 (offset 34 lines).
Hunk #8 succeeded at 10778 (offset 68 lines).
>>> shapelib 1.4.1 Configuring
(cd /home/buildroot/build/instance-3/output/build/shapelib-1.4.1/ && rm -rf config.cache && PATH="/home/buildroot/build/instance-3/output/host/bin:/home/buildroot/build/instance-3/output/host/sbin:/sbin:/usr/sbin:/bin:/usr/bin" AR="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ar" AS="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-as" LD="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld" NM="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-nm" CC="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc" GCC="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc" CPP="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-cpp" CXX="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++" FC="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gfortran" F77="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gfortran" RANLIB="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ranlib" READELF="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-readelf" STRIP="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-strip" OBJCOPY="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-objcopy" OBJDUMP="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/buildroot/build/instance-3/output/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/buildroot/build/instance-3/output/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/buildroot/build/instance-3/output/host/include" LDFLAGS_FOR_BUILD="-L/home/buildroot/build/instance-3/output/host/lib -Wl,-rpath,/home/buildroot/build/instance-3/output/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-as" DEFAULT_LINKER="/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/buildroot/build/instance-3/output/host/bin/pkg-config" STAGING_DIR="/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=yes   CONFIG_SITE=/dev/null ./configure --target=powerpc-buildroot-linux-uclibc --host=powerpc-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared   )
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for powerpc-buildroot-linux-uclibc-strip... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for style of include used by make... GNU
checking for powerpc-buildroot-linux-uclibc-gcc... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc accepts -g... yes
checking for /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc option to accept ISO C89... none needed
checking whether /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc understands -c and -o together... yes
checking dependency style of /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc... none
checking for powerpc-buildroot-linux-uclibc-ar... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ar
checking the archiver (/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ar) interface... ar
checking for powerpc-buildroot-linux-uclibc-gcc... (cached) /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc accepts -g... (cached) yes
checking for /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc option to accept ISO C89... (cached) none needed
checking whether /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc understands -c and -o together... (cached) yes
checking dependency style of /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc... (cached) none
checking whether we are using the GNU C++ compiler... yes
checking whether /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++ accepts -g... yes
checking dependency style of /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++... none
checking build system type... x86_64-pc-linux-gnu
checking host system type... powerpc-buildroot-linux-uclibc
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld
checking if the linker (/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-nm
checking the name lister (/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to powerpc-buildroot-linux-uclibc format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld option to reload object files... -r
checking for powerpc-buildroot-linux-uclibc-objdump... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-objdump
checking how to recognize dependent libraries... pass_all
checking for powerpc-buildroot-linux-uclibc-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for powerpc-buildroot-linux-uclibc-ar... (cached) /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ar
checking for archiver @FILE support... @
checking for powerpc-buildroot-linux-uclibc-strip... (cached) /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-strip
checking for powerpc-buildroot-linux-uclibc-ranlib... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ranlib
checking command to parse /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-nm output from /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for powerpc-buildroot-linux-uclibc-mt... no
checking for mt... mt
configure: WARNING: using cross tools not prefixed with host triplet
checking if mt is a manifest tool... no
checking how to run the C preprocessor... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-cpp
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc supports -fno-rtti -fno-exceptions... no
checking for /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc option to produce PIC... -fPIC -DPIC
checking if /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc PIC flag -fPIC -DPIC works... yes
checking if /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc static flag -static works... yes
checking if /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc supports -c -o file.o... yes
checking if /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc supports -c -o file.o... (cached) yes
checking whether the /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-gcc linker (/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++ -E
checking for ld used by /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++... /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld
checking if the linker (/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld) is GNU ld... yes
checking whether the /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++ linker (/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld) supports shared libraries... yes
checking for /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++ option to produce PIC... -fPIC -DPIC
checking if /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++ PIC flag -fPIC -DPIC works... yes
checking if /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++ static flag -static works... yes
checking if /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++ supports -c -o file.o... yes
checking if /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++ supports -c -o file.o... (cached) yes
checking whether the /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-g++ linker (/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for floor in -lm... yes
checking for some Win32 platform... no

Configuration summary for shapelib 1.4.1:
  - Host:                  powerpc-buildroot-linux-uclibc
  - PROJ flags:            -DPROJ4 -lproj

checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating contrib/Makefile
config.status: creating shapelib.pc
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
>>> shapelib 1.4.1 Building
PATH="/home/buildroot/build/instance-3/output/host/bin:/home/buildroot/build/instance-3/output/host/sbin:/sbin:/usr/sbin:/bin:/usr/bin"  /usr/bin/make -j8  -C /home/buildroot/build/instance-3/output/build/shapelib-1.4.1/
make[1]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
Making all in .
make[2]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
  CC       shpopen.lo
  CC       dbfopen.lo
  CC       safileio.lo
  CC       shptree.lo
  CC       sbnsearch.lo
  CC       dbfcreate.o
  CC       dbfadd.o
  CC       dbfdump.o
  CC       shpadd.o
  CC       shpcreate.o
  CC       shpdump.o
  CC       shprewind.o
  CC       shptreedump.o
  CC       shputils.o
  CC       shptest.o
  CCLD     libshp.la
  CCLD     dbfadd
  CCLD     dbfcreate
  CCLD     shpcreate
  CCLD     shpdump
  CCLD     shprewind
  CCLD     shptreedump
  CCLD     dbfdump
  CCLD     shpadd
  CCLD     shputils
  CCLD     shptest
make[2]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
Making all in contrib
make[2]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
  CC       dbfcat-dbfcat.o
  CC       dbfinfo-dbfinfo.o
  CC       shpcat-shpcat.o
  CC       shpdxf-shpdxf.o
  CC       shpfix-shpfix.o
  CC       shpsort-shpsort.o
  CC       shpcentrd-shpcentrd.o
  CXX      Shape_PointInPoly-Shape_PointInPoly.o
  CC       shpcentrd-shpgeo.o
  CC       shpdata-shpdata.o
  CC       shpdata-shpgeo.o
  CC       shpinfo-shpinfo.o
  CC       shpinfo-shpgeo.o
  CC       shpproj-shpproj.o
  CC       shpproj-shpgeo.o
  CC       shpwkb-shpwkb.o
  CC       shpwkb-shpgeo.o
  CCLD     dbfcat
  CCLD     dbfinfo
  CCLD     shpcat
  CCLD     shpdxf
  CCLD     shpfix
  CCLD     shpsort
  CXXLD    Shape_PointInPoly
  CCLD     shpdata
  CCLD     shpcentrd
  CCLD     shpinfo
  CCLD     shpproj
  CCLD     shpwkb
make[2]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
make[1]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
>>> shapelib 1.4.1 Installing to staging directory
PATH="/home/buildroot/build/instance-3/output/host/bin:/home/buildroot/build/instance-3/output/host/sbin:/sbin:/usr/sbin:/bin:/usr/bin"  /usr/bin/make -j8 DESTDIR=/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot install -C /home/buildroot/build/instance-3/output/build/shapelib-1.4.1/
make[1]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
Making install in .
make[2]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
make[3]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib'
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include'
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig'
 /bin/sh ./libtool   --mode=install /usr/bin/install -c   libshp.la '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib'
 /usr/bin/install -c -m 644 shapefil.h '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include'
 /usr/bin/install -c -m 644 shapelib.pc '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig'
libtool: install: /usr/bin/install -c .libs/libshp.so.2.0.2 /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libshp.so.2.0.2
libtool: install: (cd /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libshp.so.2.0.2 libshp.so.2 || { rm -f libshp.so.2 && ln -s libshp.so.2.0.2 libshp.so.2; }; })
libtool: install: (cd /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib && { ln -s -f libshp.so.2.0.2 libshp.so || { rm -f libshp.so && ln -s libshp.so.2.0.2 libshp.so; }; })
libtool: install: /usr/bin/install -c .libs/libshp.lai /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libshp.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin'
  /bin/sh ./libtool   --mode=install /usr/bin/install -c dbfadd dbfcreate dbfdump shpadd shpcreate shpdump shprewind shptreedump shputils '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin'
libtool: install: /usr/bin/install -c dbfadd /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/dbfadd
libtool: install: /usr/bin/install -c dbfcreate /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/dbfcreate
libtool: install: /usr/bin/install -c dbfdump /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/dbfdump
libtool: install: /usr/bin/install -c shpadd /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpadd
libtool: install: /usr/bin/install -c shpcreate /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpcreate
libtool: install: /usr/bin/install -c shpdump /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpdump
libtool: install: /usr/bin/install -c shprewind /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shprewind
libtool: install: /usr/bin/install -c shptreedump /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shptreedump
libtool: install: /usr/bin/install -c shputils /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shputils
make[3]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
make[2]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
Making install in contrib
make[2]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
make[3]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c dbfcat dbfinfo shpcat shpdxf shpfix shpsort Shape_PointInPoly shpcentrd shpdata shpinfo shpproj shpwkb '/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin'
libtool: install: /usr/bin/install -c dbfcat /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/dbfcat
libtool: install: /usr/bin/install -c dbfinfo /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/dbfinfo
libtool: install: /usr/bin/install -c shpcat /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpcat
libtool: install: /usr/bin/install -c shpdxf /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpdxf
libtool: install: /usr/bin/install -c shpfix /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpfix
libtool: install: /usr/bin/install -c shpsort /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpsort
libtool: install: /usr/bin/install -c Shape_PointInPoly /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/Shape_PointInPoly
libtool: install: /usr/bin/install -c shpcentrd /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpcentrd
libtool: install: /usr/bin/install -c shpdata /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpdata
libtool: install: /usr/bin/install -c shpinfo /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpinfo
libtool: install: /usr/bin/install -c shpproj /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpproj
libtool: install: /usr/bin/install -c shpwkb /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/bin/shpwkb
make[3]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
make[2]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
make[1]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
>>> shapelib 1.4.1 Fixing libtool files
for la in $(find /home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \
	cp -a "${la}" "${la}.fixed" && \
	/bin/sed -i -e "s:/home/buildroot/build/instance-3/output:@BASE_DIR@:g" \
		-e "s:/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \
		 -e "s:/home/buildroot/build/instance-3/output/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \
		-e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \
		 -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/buildroot/build/instance-3/output/host/opt/ext-toolchain:g" \
		-e "s:@STAGING_DIR@:/home/buildroot/build/instance-3/output/host/powerpc-buildroot-linux-uclibc/sysroot:g" \
		-e "s:@BASE_DIR@:/home/buildroot/build/instance-3/output:g" \
		"${la}.fixed" && \
	if cmp -s "${la}" "${la}.fixed"; then \
		rm -f "${la}.fixed"; \
	else \
		mv "${la}.fixed" "${la}"; \
	fi || exit 1; \
done
>>> shapelib 1.4.1 Installing to target
PATH="/home/buildroot/build/instance-3/output/host/bin:/home/buildroot/build/instance-3/output/host/sbin:/sbin:/usr/sbin:/bin:/usr/bin"  /usr/bin/make -j8 DESTDIR=/home/buildroot/build/instance-3/output/target install -C /home/buildroot/build/instance-3/output/build/shapelib-1.4.1/
make[1]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
Making install in .
make[2]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
make[3]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/target/usr/lib/pkgconfig'
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/target/usr/lib'
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/target/usr/include'
 /bin/sh ./libtool   --mode=install /usr/bin/install -c   libshp.la '/home/buildroot/build/instance-3/output/target/usr/lib'
 /usr/bin/install -c -m 644 shapelib.pc '/home/buildroot/build/instance-3/output/target/usr/lib/pkgconfig'
 /usr/bin/install -c -m 644 shapefil.h '/home/buildroot/build/instance-3/output/target/usr/include'
libtool: install: /usr/bin/install -c .libs/libshp.so.2.0.2 /home/buildroot/build/instance-3/output/target/usr/lib/libshp.so.2.0.2
libtool: install: (cd /home/buildroot/build/instance-3/output/target/usr/lib && { ln -s -f libshp.so.2.0.2 libshp.so.2 || { rm -f libshp.so.2 && ln -s libshp.so.2.0.2 libshp.so.2; }; })
libtool: install: (cd /home/buildroot/build/instance-3/output/target/usr/lib && { ln -s -f libshp.so.2.0.2 libshp.so || { rm -f libshp.so && ln -s libshp.so.2.0.2 libshp.so; }; })
libtool: install: /usr/bin/install -c .libs/libshp.lai /home/buildroot/build/instance-3/output/target/usr/lib/libshp.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/target/usr/bin'
  /bin/sh ./libtool   --mode=install /usr/bin/install -c dbfadd dbfcreate dbfdump shpadd shpcreate shpdump shprewind shptreedump shputils '/home/buildroot/build/instance-3/output/target/usr/bin'
libtool: install: /usr/bin/install -c dbfadd /home/buildroot/build/instance-3/output/target/usr/bin/dbfadd
libtool: install: /usr/bin/install -c dbfcreate /home/buildroot/build/instance-3/output/target/usr/bin/dbfcreate
libtool: install: /usr/bin/install -c dbfdump /home/buildroot/build/instance-3/output/target/usr/bin/dbfdump
libtool: install: /usr/bin/install -c shpadd /home/buildroot/build/instance-3/output/target/usr/bin/shpadd
libtool: install: /usr/bin/install -c shpcreate /home/buildroot/build/instance-3/output/target/usr/bin/shpcreate
libtool: install: /usr/bin/install -c shpdump /home/buildroot/build/instance-3/output/target/usr/bin/shpdump
libtool: install: /usr/bin/install -c shprewind /home/buildroot/build/instance-3/output/target/usr/bin/shprewind
libtool: install: /usr/bin/install -c shptreedump /home/buildroot/build/instance-3/output/target/usr/bin/shptreedump
libtool: install: /usr/bin/install -c shputils /home/buildroot/build/instance-3/output/target/usr/bin/shputils
make[3]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
make[2]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
Making install in contrib
make[2]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
make[3]: Entering directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/home/buildroot/build/instance-3/output/target/usr/bin'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c dbfcat dbfinfo shpcat shpdxf shpfix shpsort Shape_PointInPoly shpcentrd shpdata shpinfo shpproj shpwkb '/home/buildroot/build/instance-3/output/target/usr/bin'
libtool: install: /usr/bin/install -c dbfcat /home/buildroot/build/instance-3/output/target/usr/bin/dbfcat
libtool: install: /usr/bin/install -c dbfinfo /home/buildroot/build/instance-3/output/target/usr/bin/dbfinfo
libtool: install: /usr/bin/install -c shpcat /home/buildroot/build/instance-3/output/target/usr/bin/shpcat
libtool: install: /usr/bin/install -c shpdxf /home/buildroot/build/instance-3/output/target/usr/bin/shpdxf
libtool: install: /usr/bin/install -c shpfix /home/buildroot/build/instance-3/output/target/usr/bin/shpfix
libtool: install: /usr/bin/install -c shpsort /home/buildroot/build/instance-3/output/target/usr/bin/shpsort
libtool: install: /usr/bin/install -c Shape_PointInPoly /home/buildroot/build/instance-3/output/target/usr/bin/Shape_PointInPoly
libtool: install: /usr/bin/install -c shpcentrd /home/buildroot/build/instance-3/output/target/usr/bin/shpcentrd
libtool: install: /usr/bin/install -c shpdata /home/buildroot/build/instance-3/output/target/usr/bin/shpdata
libtool: install: /usr/bin/install -c shpinfo /home/buildroot/build/instance-3/output/target/usr/bin/shpinfo
libtool: install: /usr/bin/install -c shpproj /home/buildroot/build/instance-3/output/target/usr/bin/shpproj
libtool: install: /usr/bin/install -c shpwkb /home/buildroot/build/instance-3/output/target/usr/bin/shpwkb
make[3]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
make[2]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1/contrib'
make[1]: Leaving directory '/home/buildroot/build/instance-3/output/build/shapelib-1.4.1'
>>>   Finalizing target directory
# Check files that are touched by more than one package
./support/scripts/check-uniq-files -t target /home/buildroot/build/instance-3/output/build/packages-file-list.txt
./support/scripts/check-uniq-files -t staging /home/buildroot/build/instance-3/output/build/packages-file-list-staging.txt
Warning: staging file "./usr/bin/c-icap-config" is touched by more than one package: [u'c-icap', u'check']
Warning: staging file "./usr/lib32" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom']
Warning: staging file "./usr/bin/c-icap-libicapapi-config" is touched by more than one package: [u'c-icap', u'check']
Warning: staging file "./etc/mtab" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom']
Warning: staging file "./etc/resolv.conf" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom']
./support/scripts/check-uniq-files -t host /home/buildroot/build/instance-3/output/build/packages-file-list-host.txt
/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L  console 0 vt100 #~' /home/buildroot/build/instance-3/output/target/etc/inittab
/bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/buildroot/build/instance-3/output/target/etc/inittab
if grep -q CONFIG_ASH=y ./.config; then grep -qsE '^/bin/ash$' /home/buildroot/build/instance-3/output/target/etc/shells || echo "/bin/ash" >> /home/buildroot/build/instance-3/output/target/etc/shells; fi
grep: ./.config: No such file or directory
if grep -q CONFIG_HUSH=y ./.config; then grep -qsE '^/bin/hush$' /home/buildroot/build/instance-3/output/target/etc/shells || echo "/bin/hush" >> /home/buildroot/build/instance-3/output/target/etc/shells; fi
grep: ./.config: No such file or directory
mkdir -p /home/buildroot/build/instance-3/output/host/etc/meson
sed -e "s%@TARGET_CROSS@%/home/buildroot/build/instance-3/output/host/bin/powerpc-linux-%g" -e "s%@TARGET_ARCH@%ppc%g" -e "s%@TARGET_CPU@%603e%g" -e "s%@TARGET_ENDIAN@%"big"%g" -e "s%@TARGET_CFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  `%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  `%g" -e "s%@HOST_DIR@%/home/buildroot/build/instance-3/output/host%g" package/meson//cross-compilation.conf.in > /home/buildroot/build/instance-3/output/host/etc/meson/cross-compilation.conf
mkdir -p /home/buildroot/build/instance-3/output/target/etc
echo "buildroot" > /home/buildroot/build/instance-3/output/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/build/instance-3/output/target/etc/hosts
mkdir -p /home/buildroot/build/instance-3/output/target/etc
echo "Welcome to Buildroot" > /home/buildroot/build/instance-3/output/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /home/buildroot/build/instance-3/output/target/etc/shadow
rm -f /home/buildroot/build/instance-3/output/target/bin/sh
rm -f /home/buildroot/build/instance-3/output/build/locales.nopurge
for i in C en_US locale-archive; do echo $i >> /home/buildroot/build/instance-3/output/build/locales.nopurge; done
for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/buildroot/build/instance-3/output/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /home/buildroot/build/instance-3/output/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/buildroot/build/instance-3/output/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/buildroot/build/instance-3/output/target/usr/share/X11/locale/locale.dir; fi
rm -rf /home/buildroot/build/instance-3/output/target/usr/include /home/buildroot/build/instance-3/output/target/usr/share/aclocal \
	/home/buildroot/build/instance-3/output/target/usr/lib/pkgconfig /home/buildroot/build/instance-3/output/target/usr/share/pkgconfig \
	/home/buildroot/build/instance-3/output/target/usr/lib/cmake /home/buildroot/build/instance-3/output/target/usr/share/cmake
find /home/buildroot/build/instance-3/output/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /home/buildroot/build/instance-3/output/target/lib/ /home/buildroot/build/instance-3/output/target/usr/lib/ /home/buildroot/build/instance-3/output/target/usr/libexec/ \
	\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
rm -rf /home/buildroot/build/instance-3/output/target/usr/share/gdb
rm -rf /home/buildroot/build/instance-3/output/target/usr/share/bash-completion
rm -rf /home/buildroot/build/instance-3/output/target/usr/share/zsh
rm -rf /home/buildroot/build/instance-3/output/target/usr/man /home/buildroot/build/instance-3/output/target/usr/share/man
rm -rf /home/buildroot/build/instance-3/output/target/usr/info /home/buildroot/build/instance-3/output/target/usr/share/info
rm -rf /home/buildroot/build/instance-3/output/target/usr/doc /home/buildroot/build/instance-3/output/target/usr/share/doc
rm -rf /home/buildroot/build/instance-3/output/target/usr/share/gtk-doc
rmdir /home/buildroot/build/instance-3/output/target/usr/share 2>/dev/null || true
find /home/buildroot/build/instance-3/output/target   -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /home/buildroot/build/instance-3/output/target   \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/buildroot/build/instance-3/output/host/bin/powerpc-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true
test -f /home/buildroot/build/instance-3/output/target/etc/ld.so.conf && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /home/buildroot/build/instance-3/output/target/etc/ld.so.conf.d && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /home/buildroot/build/instance-3/output/target/etc
( \
	echo "NAME=Buildroot"; \
	echo "VERSION=2019.05.1"; \
	echo "ID=buildroot"; \
	echo "VERSION_ID=2019.05.1"; \
	echo "PRETTY_NAME=\"Buildroot 2019.05.1\"" \
) >  /home/buildroot/build/instance-3/output/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /home/buildroot/build/instance-3/output/target/etc
>>>   Sanitizing RPATH in target tree
/home/buildroot/build/instance-3/buildroot/support/scripts/fix-rpath target
touch /home/buildroot/build/instance-3/output/target/usr
make: Leaving directory '/home/buildroot/build/instance-3/buildroot'
make: Entering directory '/home/buildroot/build/instance-3/buildroot'
>>>   Buildroot 2019.05.1 Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> toolchain-external  Collecting legal info
>>> host-skeleton  Collecting legal info
>>> skeleton  Collecting legal info
>>> skeleton-init-sysv  Collecting legal info
>>> skeleton-init-common  Collecting legal info
>>> toolchain-external-custom  Collecting legal info
>>> toolchain  Collecting legal info
>>> busybox 1.30.1 Collecting legal info
LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548)
>>> c-icap 0.4.2 Collecting legal info
ERROR: No hash found for COPYING
>>> host-autoconf 2.69 Collecting legal info
COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2)
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> check 0.12.0 Collecting legal info
COPYING.LESSER: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861)
>>> host-pkgconf 1.6.1 Collecting legal info
COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04)
>>> execline 2.5.0.0 Collecting legal info
COPYING: OK (sha256: 3eadcf980c40da0f257b8292d805ff41e5e5a908c1942315d9a627732e1aa012)
>>> skalibs 2.6.4.0 Collecting legal info
COPYING: OK (sha256: 3eadcf980c40da0f257b8292d805ff41e5e5a908c1942315d9a627732e1aa012)
>>> gmp 6.1.2 Collecting legal info
ERROR: No hash found for COPYING.LESSERv3
ERROR: No hash found for COPYINGv2
>>> graphite2 1.3.10 Collecting legal info
ERROR: No hash found for LICENSE
>>> host-cmake 3.8.2 Collecting legal info
ERROR: No hash found for Copyright.txt
>>> ibrcommon 1.0.1 Collecting legal info
COPYING: OK (sha256: 1a0b57773a46d9d4cc2f0d1780a17acc38af506bb1e0234aaa85f8ccd6dc0b92)
README: OK (sha256: 9b8a430c2136ebcf76bd37f50da7d7a80ede413ec6604cc4694ea536e779854c)
>>> initscripts  Collecting legal info
>>> libcdio 2.0.0 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> libiconv 1.15 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d)
>>> libpthsem 2.0.8 Collecting legal info
ERROR: No hash found for COPYING
>>> lighttpd 1.4.53 Collecting legal info
COPYING: OK (sha256: 5c98cad2fbaf5c5e2562bcbab401a7c557c1bb1bac9914ecc63730925052fb13)
>>> nettle 3.4.1 Collecting legal info
COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c)
COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> proj 5.0.1 Collecting legal info
COPYING: OK (sha256: 2dcac4af6990093ef48b896bfb81452d46a31b08d46cce34b27e83f93b2e37f6)
>>> rt-tests 1.0 Collecting legal info
ERROR: No hash found for COPYING
>>> s6-dns 2.3.0.0 Collecting legal info
COPYING: OK (sha256: 6ee77e7199d69b707ab864ea7a838f9562717aaa41c89413bdb2cf835f95052f)
>>> s6-networking 2.3.0.2 Collecting legal info
COPYING: OK (sha256: 6ee77e7199d69b707ab864ea7a838f9562717aaa41c89413bdb2cf835f95052f)
>>> s6 2.7.1.1 Collecting legal info
COPYING: OK (sha256: 3eadcf980c40da0f257b8292d805ff41e5e5a908c1942315d9a627732e1aa012)
>>> shapelib 1.4.1 Collecting legal info
web/license.html: OK (sha256: a638278f7f1cb7d0cdc73b47a6c87261b882e356a8e79922e90d44d7ef1dd2c7)
COPYING: OK (sha256: 7eb803a70990017a1c4e38a8342d7413c5dfeec3ed1ac407e15ae2c274e560ff)
WARNING: the Buildroot source code has not been saved
WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined)
Legal info produced in /home/buildroot/build/instance-3/output/legal-info
make: Leaving directory '/home/buildroot/build/instance-3/buildroot'