installing hp.conf in /etc/sane.d/hp.conf... installing hp3900.conf in /etc/sane.d/hp3900.conf... installing hp4200.conf in /etc/sane.d/hp4200.conf... installing hp5400.conf in /etc/sane.d/hp5400.conf... installing hs2p.conf in /etc/sane.d/hs2p.conf... installing ibm.conf in /etc/sane.d/ibm.conf... installing kodak.conf in /etc/sane.d/kodak.conf... installing kodakaio.conf in /etc/sane.d/kodakaio.conf... installing kvs1025.conf in /etc/sane.d/kvs1025.conf... installing leo.conf in /etc/sane.d/leo.conf... installing lexmark.conf in /etc/sane.d/lexmark.conf... installing ma1509.conf in /etc/sane.d/ma1509.conf... installing magicolor.conf in /etc/sane.d/magicolor.conf... installing matsushita.conf in /etc/sane.d/matsushita.conf... installing microtek.conf in /etc/sane.d/microtek.conf... installing microtek2.conf in /etc/sane.d/microtek2.conf... installing mustek.conf in /etc/sane.d/mustek.conf... installing mustek_usb.conf in /etc/sane.d/mustek_usb.conf... installing nec.conf in /etc/sane.d/nec.conf... installing net.conf in /etc/sane.d/net.conf... installing pie.conf in /etc/sane.d/pie.conf... installing pieusb.conf in /etc/sane.d/pieusb.conf... installing pixma.conf in /etc/sane.d/pixma.conf... installing plustek.conf in /etc/sane.d/plustek.conf... installing plustek_pp.conf in /etc/sane.d/plustek_pp.conf... installing qcam.conf in /etc/sane.d/qcam.conf... installing ricoh.conf in /etc/sane.d/ricoh.conf... installing rts8891.conf in /etc/sane.d/rts8891.conf... installing s9036.conf in /etc/sane.d/s9036.conf... installing sceptre.conf in /etc/sane.d/sceptre.conf... installing sharp.conf in /etc/sane.d/sharp.conf... installing sm3840.conf in /etc/sane.d/sm3840.conf... installing snapscan.conf in /etc/sane.d/snapscan.conf... installing sp15c.conf in /etc/sane.d/sp15c.conf... installing st400.conf in /etc/sane.d/st400.conf... installing stv680.conf in /etc/sane.d/stv680.conf... installing tamarack.conf in /etc/sane.d/tamarack.conf... installing teco1.conf in /etc/sane.d/teco1.conf... installing teco2.conf in /etc/sane.d/teco2.conf... installing teco3.conf in /etc/sane.d/teco3.conf... installing test.conf in /etc/sane.d/test.conf... installing u12.conf in /etc/sane.d/u12.conf... installing umax.conf in /etc/sane.d/umax.conf... installing umax_pp.conf in /etc/sane.d/umax_pp.conf... installing umax1220u.conf in /etc/sane.d/umax1220u.conf... installing xerox_mfp.conf in /etc/sane.d/xerox_mfp.conf... installing p5.conf in /etc/sane.d/p5.conf... installing saned.conf in /etc/sane.d/saned.conf... installing dll.conf in /etc/sane.d/dll.conf... make[5]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' Making install in frontend make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/frontend' make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/frontend' make[3]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/sbin' /bin/bash ../libtool --mode=install /usr/bin/install -c scanimage '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c saned '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/sbin' libtool: install: /usr/bin/install -c scanimage /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin/scanimage libtool: install: /usr/bin/install -c saned /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/sbin/saned make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/frontend' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/frontend' Making install in tools make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' /usr/bin/make install-am make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' make[4]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 sane-backends.pc '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/lib/pkgconfig' /usr/bin/install -c sane-config '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin' libtool: install: /usr/bin/install -c sane-find-scanner /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/bin/umax_pp make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' Making install in po make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/po' if test "sane-backends" = "gettext-tools"; then \ /usr/bin/mkdir -p /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/po' Making install in testsuite make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' Making install in sanei make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/sanei' Making install in tools make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS ChangeLog COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta '/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/share/doc/sane-backends' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' make[1]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' >>> sane-backends 1.0.27 Fixing package configuration files >>> sane-backends 1.0.27 Fixing libtool files for la in $(find /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /usr/bin/sed -i -e "s:/home/giuliobenetti/autobuild/run/instance-2/output-1:@BASE_DIR@:g" \ -e "s:/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot:@STAGING_DIR@:g" \ -e "s:/home/giuliobenetti/autobuild/run/instance-2/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/giuliobenetti/autobuild/run/instance-2/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot:g" \ -e "s:@BASE_DIR@:/home/giuliobenetti/autobuild/run/instance-2/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sane-backends 1.0.27 Installing to target PATH="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin:/home/giuliobenetti/autobuild/run/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" /usr/bin/make -j5 DESTDIR=/home/giuliobenetti/autobuild/run/instance-2/output-1/target install -C /home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/ make[1]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' Making install in include make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/include' make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/include' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/include' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/include/sane' /usr/bin/install -c -m 644 sane/sane.h sane/saneopts.h '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/include/sane' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/include' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/include' Making install in lib make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/lib' make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/lib' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/lib' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/lib' Making install in sanei make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/sanei' make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/sanei' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/sanei' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/sanei' Making install in backend make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' /usr/bin/make install-am make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' make[4]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib' /bin/bash ../libtool --silent --mode=install /usr/bin/install -c libsane.la '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/sane' /bin/bash ../libtool --silent --mode=install /usr/bin/install -c libsane-abaton.la libsane-agfafocus.la libsane-apple.la libsane-artec.la libsane-artec_eplus48u.la libsane-as6e.la libsane-avision.la libsane-bh.la libsane-canon.la libsane-canon630u.la libsane-canon_dr.la libsane-cardscan.la libsane-coolscan.la libsane-coolscan2.la libsane-coolscan3.la libsane-dc25.la libsane-dmc.la libsane-epjitsu.la libsane-epson.la libsane-epson2.la libsane-fujitsu.la libsane-genesys.la libsane-gt68xx.la libsane-hp.la libsane-hp3500.la libsane-hp3900.la libsane-hp4200.la libsane-hp5400.la libsane-hp5590.la libsane-hpljm1005.la libsane-hs2p.la libsane-ibm.la libsane-kodak.la libsane-kodakaio.la libsane-kvs1025.la libsane-kvs20xx.la libsane-kvs40xx.la libsane-leo.la libsane-lexmark.la libsane-ma1509.la libsane-magicolor.la libsane-matsushita.la libsane-microtek.la libsane-microtek2.la libsane-mustek.la libsane-mustek_usb.la libsane-mustek_usb2.la libsane-nec.la libsane-net.la libsane-niash.la libsane-pie.la libsane-pieusb.la libsane-pixma.la libsane-plustek.la libsane-plustek_pp.la libsane-qcam.la libsane-ricoh.la libsane-rts8891.la libsane-s9036.la libsane-sceptre.la libsane-sharp.la libsane-sm3600.la libsane-sm3840.la libsane-snapscan.la libsane-sp15c.la libsane-st400.la libsane-stv680.la libsane-tamarack.la libsane-teco1.la libsane-teco2.la libsane-teco3.la libsane-test.la libsane-u12.la libsane-umax.la libsane-umax_pp.la libsane-umax1220u.la libsane-xerox_mfp.la libsane-p5.la libsane-dll.la '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/sane' libtool: install: warning: remember to run `libtool --finish /usr/lib' libtool: install: warning: remember to run `libtool --finish /usr/lib/sane' /usr/bin/make install-data-hook make[5]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \ /bin/bash ../mkinstalldirs /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/sane/${dir} ; \ done rm -f /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/sane/libsane.* mkdir -p -- /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/sane/artec_eplus48u test -z "/etc/sane.d" || /usr/bin/mkdir -p "/home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc/sane.d" test -z "/etc/sane.d/dll.d" || /usr/bin/mkdir -p "/home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc/sane.d/dll.d" mkdir -p -- /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/sane/gt68xx installing abaton.conf in /etc/sane.d/abaton.conf... installing agfafocus.conf in /etc/sane.d/agfafocus.conf... mkdir -p -- /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/sane/snapscan installing apple.conf in /etc/sane.d/apple.conf... installing artec.conf in /etc/sane.d/artec.conf... mkdir -p -- /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/sane/epjitsu installing artec_eplus48u.conf in /etc/sane.d/artec_eplus48u.conf... installing avision.conf in /etc/sane.d/avision.conf... installing bh.conf in /etc/sane.d/bh.conf... installing canon.conf in /etc/sane.d/canon.conf... installing canon630u.conf in /etc/sane.d/canon630u.conf... installing canon_dr.conf in /etc/sane.d/canon_dr.conf... installing cardscan.conf in /etc/sane.d/cardscan.conf... installing coolscan.conf in /etc/sane.d/coolscan.conf... installing coolscan2.conf in /etc/sane.d/coolscan2.conf... installing coolscan3.conf in /etc/sane.d/coolscan3.conf... installing dc25.conf in /etc/sane.d/dc25.conf... installing dmc.conf in /etc/sane.d/dmc.conf... installing epjitsu.conf in /etc/sane.d/epjitsu.conf... installing epson.conf in /etc/sane.d/epson.conf... installing epson2.conf in /etc/sane.d/epson2.conf... installing fujitsu.conf in /etc/sane.d/fujitsu.conf... installing genesys.conf in /etc/sane.d/genesys.conf... installing gt68xx.conf in /etc/sane.d/gt68xx.conf... installing hp.conf in /etc/sane.d/hp.conf... installing hp3900.conf in /etc/sane.d/hp3900.conf... installing hp4200.conf in /etc/sane.d/hp4200.conf... installing hp5400.conf in /etc/sane.d/hp5400.conf... installing hs2p.conf in /etc/sane.d/hs2p.conf... installing ibm.conf in /etc/sane.d/ibm.conf... installing kodak.conf in /etc/sane.d/kodak.conf... installing kodakaio.conf in /etc/sane.d/kodakaio.conf... installing kvs1025.conf in /etc/sane.d/kvs1025.conf... installing leo.conf in /etc/sane.d/leo.conf... installing lexmark.conf in /etc/sane.d/lexmark.conf... installing ma1509.conf in /etc/sane.d/ma1509.conf... installing magicolor.conf in /etc/sane.d/magicolor.conf... installing matsushita.conf in /etc/sane.d/matsushita.conf... installing microtek.conf in /etc/sane.d/microtek.conf... installing microtek2.conf in /etc/sane.d/microtek2.conf... installing mustek.conf in /etc/sane.d/mustek.conf... installing mustek_usb.conf in /etc/sane.d/mustek_usb.conf... installing nec.conf in /etc/sane.d/nec.conf... installing net.conf in /etc/sane.d/net.conf... installing pie.conf in /etc/sane.d/pie.conf... installing pieusb.conf in /etc/sane.d/pieusb.conf... installing pixma.conf in /etc/sane.d/pixma.conf... installing plustek.conf in /etc/sane.d/plustek.conf... installing plustek_pp.conf in /etc/sane.d/plustek_pp.conf... installing qcam.conf in /etc/sane.d/qcam.conf... installing ricoh.conf in /etc/sane.d/ricoh.conf... installing rts8891.conf in /etc/sane.d/rts8891.conf... installing s9036.conf in /etc/sane.d/s9036.conf... installing sceptre.conf in /etc/sane.d/sceptre.conf... installing sharp.conf in /etc/sane.d/sharp.conf... installing sm3840.conf in /etc/sane.d/sm3840.conf... installing snapscan.conf in /etc/sane.d/snapscan.conf... installing sp15c.conf in /etc/sane.d/sp15c.conf... installing st400.conf in /etc/sane.d/st400.conf... installing stv680.conf in /etc/sane.d/stv680.conf... installing tamarack.conf in /etc/sane.d/tamarack.conf... installing teco1.conf in /etc/sane.d/teco1.conf... installing teco2.conf in /etc/sane.d/teco2.conf... installing teco3.conf in /etc/sane.d/teco3.conf... installing test.conf in /etc/sane.d/test.conf... installing u12.conf in /etc/sane.d/u12.conf... installing umax.conf in /etc/sane.d/umax.conf... installing umax_pp.conf in /etc/sane.d/umax_pp.conf... installing umax1220u.conf in /etc/sane.d/umax1220u.conf... installing xerox_mfp.conf in /etc/sane.d/xerox_mfp.conf... installing p5.conf in /etc/sane.d/p5.conf... installing saned.conf in /etc/sane.d/saned.conf... installing dll.conf in /etc/sane.d/dll.conf... make[5]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/backend' Making install in frontend make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/frontend' make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/frontend' make[3]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/sbin' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c scanimage '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c saned '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/sbin' libtool: install: /usr/bin/install -c saned /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/sbin/saned libtool: install: /usr/bin/install -c scanimage /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin/scanimage make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/frontend' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/frontend' Making install in tools make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' /usr/bin/make install-am make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' make[4]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin' /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/pkgconfig' /bin/bash ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin' /usr/bin/install -c sane-config '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin' /usr/bin/install -c -m 644 sane-backends.pc '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c sane-find-scanner /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin/umax_pp make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/tools' Making install in po make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/po' if test "sane-backends" = "gettext-tools"; then \ /usr/bin/mkdir -p /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/po' Making install in testsuite make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' Making install in sanei make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/sanei' Making install in tools make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' make[3]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS ChangeLog COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta '/home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/doc/sane-backends' make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' make[2]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' make[1]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/sane-backends-1.0.27' tinymembench-0.4.tar.gz: OK (sha256: e37a2682065b2778f2fa7f22bd59472f5ca2191be48503952ae020b8f023f23d) >>> tinymembench 0.4 Extracting gzip -d -c /home/giuliobenetti/autobuild/run/instance-2/dl/tinymembench/tinymembench-0.4.tar.gz | tar --strip-components=1 -C /home/giuliobenetti/autobuild/run/instance-2/output-1/build/tinymembench-0.4 -xf - >>> tinymembench 0.4 Patching Applying 0001-arm-fix-build-on-Thumb-only-architectures.patch using patch: patching file arm-neon.S patching file asm-opt.c >>> tinymembench 0.4 Configuring >>> tinymembench 0.4 Building PATH="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin:/home/giuliobenetti/autobuild/run/instance-2/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin" AR="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-ar" AS="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-as" LD="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-ld" NM="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-nm" CC="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gcc" GCC="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gcc" CPP="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-cpp" CXX="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-g++" FC="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gfortran" F77="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gfortran" RANLIB="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-ranlib" READELF="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-readelf" STRIP="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-strip" OBJCOPY="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-objcopy" OBJDUMP="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/giuliobenetti/autobuild/run/instance-2/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/giuliobenetti/autobuild/run/instance-2/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/giuliobenetti/autobuild/run/instance-2/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/giuliobenetti/autobuild/run/instance-2/output-1/host/lib -Wl,-rpath,/home/giuliobenetti/autobuild/run/instance-2/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-as" DEFAULT_LINKER="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/pkg-config" STAGING_DIR="/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j5 -C /home/giuliobenetti/autobuild/run/instance-2/output-1/build/tinymembench-0.4 make[1]: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/tinymembench-0.4' /home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c util.c /home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c asm-opt.c /home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c x86-sse2.S /home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c arm-neon.S /home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c mips-32.S /home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c aarch64-asm.S /home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-gcc -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o tinymembench main.c util.o asm-opt.o x86-sse2.o arm-neon.o mips-32.o aarch64-asm.o -lm main.c: In function 'mmap_framebuffer': main.c:56:9: warning: implicit declaration of function 'ioctl' [-Wimplicit-function-declaration] 56 | if (ioctl(fd, FBIOGET_FSCREENINFO, &finfo)) | ^~~~~ make[1]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/output-1/build/tinymembench-0.4' >>> tinymembench 0.4 Installing to target /usr/bin/install -m 0755 -D /home/giuliobenetti/autobuild/run/instance-2/output-1/build/tinymembench-0.4/tinymembench /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/bin/tinymembench >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/giuliobenetti/autobuild/run/instance-2/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-%g' -e 's%@TARGET_ARCH@%x86_64%g' -e 's%@TARGET_CPU@%%g' -e 's%@TARGET_ENDIAN@%little%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/home/giuliobenetti/autobuild/run/instance-2/output-1/host%g' -e 's%@STAGING_DIR@%/home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot%g' -e 's%@STATIC@%false%g' package/meson//cross-compilation.conf.in > /home/giuliobenetti/autobuild/run/instance-2/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/giuliobenetti/autobuild/run/instance-2/output-1/host/etc/meson/cross-compilation.conf.in > /home/giuliobenetti/autobuild/run/instance-2/output-1/host/etc/meson/cross-compilation.conf mkdir -p /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc echo "buildroot" > /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc/hosts mkdir -p /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc echo "Welcome to Buildroot" > /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root::, /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc/shadow rm -f /home/giuliobenetti/autobuild/run/instance-2/output-1/target/bin/sh printf '%s\n' C en_US locale-archive > /home/giuliobenetti/autobuild/run/instance-2/output-1/build/locales.nopurge for dir in /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/locale /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/X11/locale /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/giuliobenetti/autobuild/run/instance-2/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/include /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/aclocal \ /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/pkgconfig /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/pkgconfig \ /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/cmake /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/cmake \ /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/doc find /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/giuliobenetti/autobuild/run/instance-2/output-1/target/lib/ /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/ /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/gdb rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/bash-completion rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc/bash_completion.d rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/zsh rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/man /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/man rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/info /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/info rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/doc /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/doc rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share/gtk-doc rmdir /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/share 2>/dev/null || true rm -rf /home/giuliobenetti/autobuild/run/instance-2/output-1/target/lib/debug /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/debug find /home/giuliobenetti/autobuild/run/instance-2/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/giuliobenetti/autobuild/run/instance-2/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/giuliobenetti/autobuild/run/instance-2/output-1/host/bin/x86_64-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2021.02-1213-g36b9d87e19"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2021.02.7"; \ echo "PRETTY_NAME=\"Buildroot 2021.02.7\"" \ ) > /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/giuliobenetti/autobuild/run/instance-2/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/giuliobenetti/autobuild/run/instance-2/output-1/per-package /home/giuliobenetti/autobuild/run/instance-2/buildroot/support/scripts/fix-rpath target touch /home/giuliobenetti/autobuild/run/instance-2/output-1/target/usr ln -snf /home/giuliobenetti/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot /home/giuliobenetti/autobuild/run/instance-2/output-1/staging make: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/buildroot' make: Entering directory '/home/giuliobenetti/autobuild/run/instance-2/buildroot' >>> Buildroot 2021.02-1213-g36b9d87e19 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> musl-compat-headers Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-bootlin 2020.08-1 Collecting legal info >>> toolchain Collecting legal info >>> bind 9.11.36 Collecting legal info COPYRIGHT: OK (sha256: cad49daa42654bc241762cd998630168a2542c8fd6fad3881e2eac1510bb6fcd) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> bzip2 1.0.8 Collecting legal info LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3) >>> dhcp 4.4.2-P1 Collecting legal info LICENSE: OK (sha256: 9961fce0d83a6229b9084cdadedfa723a53274c63af610c9adb61b607e0f5a76) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-gawk 5.1.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> expat 2.4.1 Collecting legal info COPYING: OK (sha256: 8c6b5b6de8fae20b317f4992729abc0e520bfba4c7606cd1e9eeb87418eebdec) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> iodine 0.7.0 Collecting legal info README: OK (sha256: f41a252b2218759aa351270b7ad9791bdd323836b940e35c0614837a5d24dcb7) >>> libgpiod 1.6.3 Collecting legal info COPYING: OK (sha256: ce64d5f7b49ea6d80fdb6d4cdee6839d1a94274f7493dc797c3b55b65ec8e9ed) >>> host-autoconf-archive 2019.01.06 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> libilbc 829b08c7902ceb87a261279fabb36b6d523c6e07 Collecting legal info gips_iLBClicense.pdf: OK (sha256: b7f4cbb4a12cd11a3d1aeda9bd17c99f59b054de4b3ee53045531cd2fa74dd2a) >>> libmnl 1.0.4 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libnftnl 1.1.7 Collecting legal info COPYING: OK (sha256: 98193898c663001eff2fdcfb676e210c13042bc1a05e8d570c363efa396f8e24) >>> lrzip 0.641 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-nasm 2.15.05 Collecting legal info LICENSE: OK (sha256: 1563996c52e220e15ef2418e67d39488255aa8c28c89e617074d3afe3ee329e0) >>> lz4 1.9.3 Collecting legal info lib/LICENSE: OK (sha256: d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71) programs/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> lzo 2.10 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-cmake 3.15.5 Collecting legal info Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9) >>> mtools 4.0.26 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-lzip 1.21 Collecting legal info COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef) >>> openal 1.20.1 Collecting legal info COPYING: OK (sha256: d808ce217e5b611854da622b57ec29fe545584c48bc5352fae72a4b6e5074a15) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> sane-backends 1.0.27 Collecting legal info COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa) >>> tinymembench 0.4 Collecting legal info LICENSE: OK (sha256: 8ba473aced4630aee2808efe17b53e904a9d68a9b3361de491717f9a4e75da39) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-bootlin-2020.08-1: cannot save license (TOOLCHAIN_EXTERNAL_BOOTLIN_LICENSE_FILES not defined) Legal info produced in /home/giuliobenetti/autobuild/run/instance-2/output-1/legal-info make: Leaving directory '/home/giuliobenetti/autobuild/run/instance-2/buildroot'