>>> poppler 0.77.0 Downloading
--2019-06-02 22:30:16--  http://poppler.freedesktop.org/poppler-0.77.0.tar.xz
Resolving poppler.freedesktop.org (poppler.freedesktop.org)... 35.185.111.185
Connecting to poppler.freedesktop.org (poppler.freedesktop.org)|35.185.111.185|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://poppler.freedesktop.org/poppler-0.77.0.tar.xz [following]
--2019-06-02 22:30:17--  https://poppler.freedesktop.org/poppler-0.77.0.tar.xz
Connecting to poppler.freedesktop.org (poppler.freedesktop.org)|35.185.111.185|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1533068 (1.5M) [application/x-xz]
Saving to: '/home/buildroot/autobuild/run/instance-3/output/build/.poppler-0.77.0.tar.xz.BVUTmv/output'

     0K .......... .......... .......... .......... ..........  3%  268K 5s
    50K .......... .......... .......... .......... ..........  6%  515K 4s
   100K .......... .......... .......... .......... .......... 10%  137M 3s
   150K .......... .......... .......... .......... .......... 13%  148M 2s
   200K .......... .......... .......... .......... .......... 16%  535K 2s
   250K .......... .......... .......... .......... .......... 20%  140M 2s
   300K .......... .......... .......... .......... .......... 23%  153M 1s
   350K .......... .......... .......... .......... .......... 26%  536K 1s
   400K .......... .......... .......... .......... .......... 30%  133M 1s
   450K .......... .......... .......... .......... .......... 33%  135M 1s
   500K .......... .......... .......... .......... .......... 36%  123M 1s
   550K .......... .......... .......... .......... .......... 40%  540K 1s
   600K .......... .......... .......... .......... .......... 43%  118M 1s
   650K .......... .......... .......... .......... .......... 46%  135M 1s
   700K .......... .......... .......... .......... .......... 50%  124M 1s
   750K .......... .......... .......... .......... .......... 53%  523K 1s
   800K .......... .......... .......... .......... .......... 56% 71.9M 1s
   850K .......... .......... .......... .......... .......... 60%  108M 0s
   900K .......... .......... .......... .......... .......... 63%  115M 0s
   950K .......... .......... .......... .......... .......... 66% 16.0M 0s
  1000K .......... .......... .......... .......... .......... 70% 1.37M 0s
  1050K .......... .......... .......... .......... .......... 73%  929K 0s
  1100K .......... .......... .......... .......... .......... 76%  117M 0s
  1150K .......... .......... .......... .......... .......... 80%  135M 0s
  1200K .......... .......... .......... .......... .......... 83%  133M 0s
  1250K .......... .......... .......... .......... .......... 86%  142M 0s
  1300K .......... .......... .......... .......... .......... 90%  136M 0s
  1350K .......... .......... .......... .......... .......... 93%  136M 0s
  1400K .......... .......... .......... .......... .......... 96%  125M 0s
  1450K .......... .......... .......... .......... .......   100%  144M=0.8s

2019-06-02 22:30:18 (1.93 MB/s) - '/home/buildroot/autobuild/run/instance-3/output/build/.poppler-0.77.0.tar.xz.BVUTmv/output' saved [1533068/1533068]

poppler-0.77.0.tar.xz: OK (sha256: 7267eb4cbccd64a58244b8211603c1c1b6bf32c7f6a4ced2642865346102f36b)
>>> poppler 0.77.0 Extracting
xzcat /home/buildroot/autobuild/run/instance-3/dl/poppler/poppler-0.77.0.tar.xz | tar --strip-components=1 -C /home/buildroot/autobuild/run/instance-3/output/build/poppler-0.77.0   -xf -
>>> poppler 0.77.0 Patching
>>> poppler 0.77.0 Configuring
(mkdir -p /home/buildroot/autobuild/run/instance-3/output/build/poppler-0.77.0/ && cd /home/buildroot/autobuild/run/instance-3/output/build/poppler-0.77.0/ && rm -f CMakeCache.txt && PATH="/home/buildroot/autobuild/run/instance-3/output/host/bin:/home/buildroot/autobuild/run/instance-3/output/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"  /home/buildroot/autobuild/run/instance-3/output/host/bin/cmake /home/buildroot/autobuild/run/instance-3/output/build/poppler-0.77.0/ -DCMAKE_TOOLCHAIN_FILE="/home/buildroot/autobuild/run/instance-3/output/host/share/buildroot/toolchainfile.cmake" -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON  -DENABLE_UNSTABLE_API_ABI_HEADERS=ON -DCMAKE_CXX_FLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os   -latomic" -DENABLE_DCTDECODER=libjpeg -DWITH_JPEG=ON -DWITH_PNG=OFF -DENABLE_CMS=none -DENABLE_LIBOPENJPEG=openjpeg2 -DENABLE_LIBCURL=ON -DENABLE_QT5=OFF -DENABLE_UTILS=OFF -DENABLE_ZLIB=ON -DWITH_Cairo=OFF -DWITH_TIFF=OFF -DWITH_NSS3=OFF -USE_FIXEDPOINT=OFF -DUSE_FLOAT=ON )
-- The C compiler identification is GNU 7.4.0
-- The CXX compiler identification is GNU 7.4.0
-- Check for working C compiler: /home/buildroot/autobuild/run/instance-3/output/host/bin/nios2-linux-gcc
-- Check for working C compiler: /home/buildroot/autobuild/run/instance-3/output/host/bin/nios2-linux-gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /home/buildroot/autobuild/run/instance-3/output/host/bin/nios2-linux-g++
-- Check for working CXX compiler: /home/buildroot/autobuild/run/instance-3/output/host/bin/nios2-linux-g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test GCC_HAS_AS_NEEDED
-- Performing Test GCC_HAS_AS_NEEDED - Success
-- Found PkgConfig: /home/buildroot/autobuild/run/instance-3/output/host/bin/pkg-config (found version "1.6.1") 
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Check if compiler accepts -pthread
CMake Error: TRY_RUN() invoked in cross-compiling mode, please set the following cache variables appropriately:
   THREADS_PTHREAD_ARG (advanced)
For details see /home/buildroot/autobuild/run/instance-3/output/build/poppler-0.77.0/TryRunResults.cmake
-- Check if compiler accepts -pthread - no
-- Found Threads: TRUE  
-- Check if the system is big endian
-- Searching 16 bit integer
-- Looking for sys/types.h
-- Looking for sys/types.h - found
-- Looking for stdint.h
-- Looking for stdint.h - found
-- Looking for stddef.h
-- Looking for stddef.h - found
-- Check size of unsigned short
-- Check size of unsigned short - done
-- Using unsigned short
-- Check if the system is big endian - little endian
-- Checking _FILE_OFFSET_BITS for large files
-- Checking _FILE_OFFSET_BITS for large files - needed
CMake Warning at CMakeLists.txt:79 (message):
  

   No test data found in $testdatadir.
   You will not be able to run 'make test' successfully.

  

   The test data is not included in the source packages
   and is also not part of the main git repository. Instead,
   you can checkout the test data from its own git
   repository with:

  

     git clone git://git.freedesktop.org/git/poppler/test

  

   You should checkout the test data as a sibling of your
   poppler source folder or specify the location of your
   checkout with -DTESTDATADIR=/path/to/checkoutdir/test.
    


-- Found Freetype: /home/buildroot/autobuild/run/instance-3/output/host/nios2-buildroot-linux-gnu/sysroot/usr/lib/libfreetype.so (found version "2.9.1") 
-- Checking for module 'fontconfig'
--   Found fontconfig, version 2.13.1
-- Found Fontconfig: /home/buildroot/autobuild/run/instance-3/output/host/nios2-buildroot-linux-gnu/sysroot/usr/lib/libfontconfig.so  
-- Found JPEG: /home/buildroot/autobuild/run/instance-3/output/host/nios2-buildroot-linux-gnu/sysroot/usr/lib/libjpeg.so  
-- Performing Test ICONV_SECOND_ARGUMENT_IS_CONST
-- Performing Test ICONV_SECOND_ARGUMENT_IS_CONST - Failed
-- Found Iconv: /home/buildroot/autobuild/run/instance-3/output/host/nios2-buildroot-linux-gnu/sysroot/usr/lib/libc.so
-- Found ZLIB: /home/buildroot/autobuild/run/instance-3/output/host/nios2-buildroot-linux-gnu/sysroot/usr/lib/libz.so (found version "1.2.11") 
-- Found CURL: /home/buildroot/autobuild/run/instance-3/output/host/nios2-buildroot-linux-gnu/sysroot/usr/lib/libcurl.so (found version "7.65.0") 
-- Checking for module 'poppler-data'
--   Package 'poppler-data', required by 'virtual:world', not found
-- Looking for include file dlfcn.h
-- Looking for include file dlfcn.h - found
-- Looking for include file fcntl.h
-- Looking for include file fcntl.h - found
-- Looking for include file stdlib.h
-- Looking for include file stdlib.h - found
-- Looking for include file sys/mman.h
-- Looking for include file sys/mman.h - found
-- Looking for include file sys/stat.h
-- Looking for include file sys/stat.h - found
-- Looking for include file unistd.h
-- Looking for include file unistd.h - found
-- Looking for C++ include codecvt
-- Looking for C++ include codecvt - found
-- Looking for fseek64
-- Looking for fseek64 - not found
-- Looking for fseeko
-- Looking for fseeko - found
-- Looking for ftell64
-- Looking for ftell64 - not found
-- Looking for pread64
-- Looking for pread64 - found
-- Looking for lseek64
-- Looking for lseek64 - found
-- Looking for gmtime_r
-- Looking for gmtime_r - found
-- Looking for timegm
-- Looking for timegm - found
-- Looking for gettimeofday
-- Looking for gettimeofday - found
-- Looking for localtime_r
-- Looking for localtime_r - found
-- Looking for popen
-- Looking for popen - found
-- Looking for mkstemp
-- Looking for mkstemp - found
-- Looking for strcpy_s
-- Looking for strcpy_s - not found
-- Looking for strcat_s
-- Looking for strcat_s - not found
-- Looking for strtok_r
-- Looking for strtok_r - found
-- Performing Test HAVE_DIRENT_H
-- Performing Test HAVE_DIRENT_H - Success
-- Performing Test HAVE_NDIR_H
-- Performing Test HAVE_NDIR_H - Failed
-- Performing Test HAVE_SYS_DIR_H
-- Performing Test HAVE_SYS_DIR_H - Success
-- Performing Test HAVE_SYS_NDIR_H
-- Performing Test HAVE_SYS_NDIR_H - Failed
-- Looking for nanosleep
-- Looking for nanosleep - found
Building Poppler with support for:
  font configuration:   fontconfig
  splash output:        yes
  cairo output:         no
  qt5 wrapper:          no
  glib wrapper:         no
    introspection:      no
    gtk-doc:            no
  cpp wrapper:          yes
  use libjpeg:          yes
  use libpng:           no
  use libtiff:          no
  use zlib compress:    yes
  use zlib uncompress:  no
  use nss3:             no
  use curl:             yes
  use libopenjpeg2:     yes
  use lcms2:            no
  command line utils:   no
  fuzz target:          no
  test data dir:        /home/buildroot/autobuild/run/instance-3/output/build/poppler-0.77.0/../test
-- Configuring incomplete, errors occurred!
See also "/home/buildroot/autobuild/run/instance-3/output/build/poppler-0.77.0/CMakeFiles/CMakeOutput.log".
See also "/home/buildroot/autobuild/run/instance-3/output/build/poppler-0.77.0/CMakeFiles/CMakeError.log".
make: *** [/home/buildroot/autobuild/run/instance-3/output/build/poppler-0.77.0/.stamp_configured] Error 1
make: Leaving directory `/home/buildroot/autobuild/run/instance-3/buildroot'