checking if we can build kernel streams modules for parse... no
checking if we need basic refclock support... yes
checking if we want HP-UX adjtimed support... no
checking if we want QNX adjtime support... no
checking if we can read kmem... no
checking if adjtime is accurate... yes
checking the name of 'tick' in the kernel... _tick
checking for the units of 'tick'... usec
checking the name of 'tickadj' in the kernel... _tickadj
checking for the units of 'tickadj'... usec
checking half-heartedly for 'dosynctodr' in the kernel... _dosynctodr
checking half-heartedly for 'noprintf' in the kernel... _noprintf
checking for a default value for 'tick'... txc.tick
checking for a default value for 'tickadj'... no
configure: WARNING: Can't read kmem but no PRESET_TICK.  No tickadj.
checking if we want and can make the ntptime utility... yes
checking if we want and can make the tickadj utility... yes
checking if we want and can make the timetrim utility... no
checking if we want to build the NTPD simulator... no
checking if sntp will be built... no
checking if we want to build ntpsnmpd... no
checking if we should always slew the time... no
checking if we should step and slew the time... no
checking if ntpdate should step the time... no
checking if we should sync TODR clock every hour... no
checking if we should avoid kernel FLL bug... no
checking if we want new session key behavior... yes
checking if we want the explicit 127.0.0.0/8 martian filter... yes
checking if we want correct mode7 fudgetime2 behavior... yes
checking if we should use the IRIG sawtooth filter... no
checking if we should enable NIST lockclock scheme... no
checking if we want support for Samba's signing daemon... no
checking for libscf.h... no
checking for struct sockaddr_storage... yes
checking for sockaddr_storage.__ss_family... no
checking for in_port_t... yes
checking type of socklen arg for getsockname()... socklen_t
checking struct sockaddr for sa_len... no
checking for IPv6 structures... yes
checking for Kame IPv6 support... no
checking for in6_pktinfo... yes
checking for sockaddr_in6.sin6_scope_id... yes
checking for in6addr_any... yes
checking for struct if_laddrconf... no
checking for struct if_laddrreq... no
checking for multicast IP support... yes
checking arg type needed for setsockopt() IP*_MULTICAST_LOOP... u_int
checking for getifaddrs... yes
checking for if_nametoindex... yes
checking for interface list sysctl... no
checking if we want the saveconfig mechanism... yes
checking if we want the experimental leap smear code... no
checking if we want dynamic interleave support... no
checking for ruby... no
checking for gtest-config... no
checking if we want to enable tests with undiagnosed problems... yes
checking if we can run test-ntp_restrict... no
checking if we can run test-ntp_scanner... no
checking if we can run test-ntp_signd... no
checking whether sigsetjmp is declared... yes
checking whether siglongjmp is declared... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating adjtimed/Makefile
config.status: creating clockstuff/Makefile
config.status: creating include/Makefile
config.status: creating include/isc/Makefile
config.status: creating kernel/Makefile
config.status: creating kernel/sys/Makefile
config.status: creating libntp/Makefile
config.status: creating libparse/Makefile
config.status: creating ntpd/Makefile
config.status: creating ntpd/complete.conf
config.status: creating ntpdate/Makefile
config.status: creating ntpdc/Makefile
config.status: creating ntpdc/nl.pl
config.status: creating ntpq/Makefile
config.status: creating ntpsnmpd/Makefile
config.status: creating parseutil/Makefile
config.status: creating scripts/Makefile
config.status: creating scripts/build/Makefile
config.status: creating scripts/build/genAuthors
config.status: creating scripts/build/mkver
config.status: creating scripts/calc_tickadj/Makefile
config.status: creating scripts/calc_tickadj/calc_tickadj
config.status: creating scripts/lib/Makefile
config.status: creating scripts/ntp-wait/Makefile
config.status: creating scripts/ntp-wait/ntp-wait
config.status: creating scripts/ntpsweep/Makefile
config.status: creating scripts/ntpsweep/ntpsweep
config.status: creating scripts/ntptrace/Makefile
config.status: creating scripts/ntptrace/ntptrace
config.status: creating scripts/ntpver
config.status: creating scripts/plot_summary
config.status: creating scripts/summary
config.status: creating scripts/update-leap/Makefile
config.status: creating scripts/update-leap/update-leap
config.status: creating tests/Makefile
config.status: creating tests/bug-2803/Makefile
config.status: creating tests/libntp/Makefile
config.status: creating tests/ntpd/Makefile
config.status: creating tests/ntpq/Makefile
config.status: creating tests/sandbox/Makefile
config.status: creating tests/sec-2853/Makefile
config.status: creating util/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
=== configuring in sntp (/home/buildroot/autobuild/instance-2/output-1/build/ntp-4.2.8p15/sntp)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/usr'  '--target=m68k-buildroot-linux-uclibc' '--host=m68k-buildroot-linux-uclibc' '--build=x86_64-pc-linux-gnu' '--exec-prefix=/usr' '--sysconfdir=/etc' '--localstatedir=/var' '--program-prefix=' '--disable-gtk-doc' '--disable-gtk-doc-html' '--disable-doc' '--disable-docs' '--disable-documentation' '--with-xmlto=no' '--with-fop=no' '--disable-dependency-tracking' '--enable-ipv6' '--disable-nls' '--enable-static' '--enable-shared' '--with-shared' '--program-transform-name=s,,,' '--disable-tickadj' '--disable-debugging' '--with-yielding-select=yes' '--disable-local-libevent' '--with-crypto' '--enable-openssl-random' '--with-hardenfile=default' '--disable-linuxcaps' '--without-lineeditlibs' '--without-ntpsnmpd' '--disable-ATOM' '--disable-SHM' '--without-sntp' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=m68k-buildroot-linux-uclibc' 'target_alias=m68k-buildroot-linux-uclibc' 'CC=/home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc' 'CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -O0 -g0 ' 'LDFLAGS=' 'CPPFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' 'CPP=/home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-cpp' --cache-file=/dev/null --srcdir=.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for m68k-buildroot-linux-uclibc-strip... /bin/true
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... m68k-buildroot-linux-uclibc
checking whether make supports the include directive... yes (GNU style)
checking for m68k-buildroot-linux-uclibc-cc... /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc accepts -g... yes
checking for /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc option to enable C11 features... none needed
checking whether /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc understands -c and -o together... yes
checking dependency style of /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc... none
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking for vfork.h... no
checking for sys/time.h... yes
checking for stdarg.h... yes
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking how to run the C preprocessor... /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-cpp
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc needs -traditional... no
checking if /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc can handle #warning... yes
checking if /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc supports __attribute__((...))... yes
checking if /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc can handle -Wstrict-overflow... yes
checking if /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc can handle -Winit-self... yes
checking if linker supports omitting unused code and data... no
checking additional compiler flags... none needed
checking additional linker flags... none needed
checking whether byte ordering is bigendian... (cached) yes
checking for working volatile... yes
checking how to run the C preprocessor... /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-cpp
checking for compile/link hardening flags... in file harden/default
checking for install dir and man conventions... in file loc/debian
checking for m68k-buildroot-linux-uclibc-ar... /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc-ar
checking the archiver (/home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc-ar) interface... ar
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking how to print strings... printf
checking for pid_t... yes
checking for fork... yes
checking for vfork... yes
checking for vprintf... yes
checking for size_t... yes
checking for /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc options needed to detect all undeclared functions... none needed
checking whether strerror_r is declared... yes
checking for unsigned long long int... yes
checking for vsnprintf... yes
checking whether vsnprintf is C99 compliant... no
checking if C99-snprintf replacement vsnprintf will be used... yes
checking for inttypes.h... (cached) yes
checking for locale.h... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for struct lconv.decimal_point... yes
checking for struct lconv.thousands_sep... yes
checking for long double... yes
checking for long long int... yes
checking for unsigned long long int... (cached) yes
checking for size_t... (cached) yes
checking for intmax_t... yes
checking for uintmax_t... yes
checking for uintptr_t... yes
checking for ptrdiff_t... yes
checking for localeconv... yes
checking for an ANSI C-conforming const... yes
checking for snprintf... yes
checking whether snprintf is C99 compliant... no
checking if C99-snprintf replacement snprintf will be used... yes
checking for ld used by /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc... /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-ld
checking if the linker (/home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-ld) is GNU ld... yes
checking for directory path separator... '/'
checking line editing libraries... no
checking for library containing cos... none required
checking for working fork... cross
configure: WARNING: result yes guessed because of cross compilation
checking for working vfork... (cached) yes
checking for working alloca.h... yes
checking for alloca... yes
checking whether strerror_r returns char *... yes
checking for library containing clock_gettime... none required
checking for clock_getres... yes
checking for clock_gettime... yes
checking for clock_settime... yes
checking for getclock... no
checking for stime... yes
checking for timegm... yes
checking for strlcpy... yes
checking for strlcat... yes
checking for library containing snprintb... no
checking for errno.h... yes
checking for sys/socket.h... yes
checking for sys/types.h... (cached) yes
checking for time.h... yes
checking for net/if.h... yes
checking for linux/if_addr.h... yes
checking for arpa/nameser.h... yes
checking for sys/param.h... yes
checking for sys/time.h... (cached) yes
checking for sys/timers.h... no
checking for sys/sysctl.h... yes
checking for netinet/in_system.h... no
checking for netinet/in_systm.h... yes
checking for netinet/in.h... yes
checking for resolv.h... yes
checking for net/if_var.h... no
checking for netinet/ip.h... yes
checking for netinet/in_var.h... no
checking for library containing inet_pton... none required
checking for library containing inet_ntop... none required
checking for library containing setsockopt... none required
checking for recvmsg... yes
checking for inline... inline
checking size of time_t... 4
checking whether char is unsigned... no
checking size of signed char... 1
checking for s_char... no
checking for long long... yes
checking size of short... 2
checking size of int... 4
checking size of long... 4
checking size of long long... 8
checking for uid_t in sys/types.h... yes
checking if we're including debugging code... no
checking for semaphore.h... yes
checking for socketpair... yes
checking for _beginthread... no
checking for pthread.h... yes
checking POSIX thread version... 10
checking for LinuxThreads pthread.h... no
checking for GNU Pth pthread.h... no
checking for sched.h... yes
checking for pthread_create in default libraries... yes
configure: ol_link_threads: <posix> ol_link_pthreads <>
checking for sched_yield... yes
checking for pthread_yield... yes
checking for thr_yield... no
checking for pthread_kill... yes
checking for pthread_rwlock_destroy with <pthread.h>... yes
checking for pthread_detach with <pthread.h>... yes
checking for pthread_setconcurrency... yes
checking for pthread_getconcurrency... yes
checking for thr_setconcurrency... no
checking for thr_getconcurrency... no
checking for pthread_kill_other_threads_np... no
checking for LinuxThreads implementation... no
checking for LinuxThreads consistency... no
checking if pthread_create() works... yes
checking for thread specific errno... yes
checking for thread specific h_errno... yes
checking for sem_timedwait... yes
checking size of pthread_t... 4
checking for sigwait... yes
checking for pthread_attr_getstacksize... yes
checking for pthread_attr_setstacksize... yes
checking for sysconf... yes
checking for sys/clockctl.h... no
checking if we should use /dev/clockctl... no
checking for sys/capability.h... no
checking for sys/prctl.h... yes
checking if we have linux capabilities (libcap)... no
checking for priv.h... no
checking if we have solaris privileges... no
checking for sys/mac.h... no
checking if we should use TrustedBSD MAC privileges... no
checking for library containing res_init... no
checking for sys/types.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for arpa/nameser.h... (cached) yes
checking for netdb.h... yes
checking for resolv.h... (cached) yes
checking for res_init... no
checking for __res_init... yes
checking for inet_ntop... yes
checking for inet_pton... yes
checking for uintptr_t... (cached) yes
checking for int32... no
checking for u_int32... no
checking for int32 with DNS headers included... no
checking for u_int32 with DNS headers included... no
checking for sys/timepps.h... no
checking for struct timespec... yes
checking for struct ntptimeval... yes
checking for md5.h... no
checking for library containing MD5Init... no
checking for MD5Init... no
checking for sysconf... (cached) yes
checking for getdtablesize... yes
checking for sigaction... yes
checking for sigset... yes
checking for sigvec... no
checking for SIGIO... yes
checking if we want to use SIGIO... Possible for m68k-buildroot-linux-uclibc but disabled because of reported problems
checking for SIGPOLL... yes
checking if we can use SIGPOLL for UDP I/O... no
checking if we can use SIGPOLL for TTY I/O... no
checking number of arguments to gettimeofday()... 2
checking for settimeofday... yes
checking if we'll use clock_settime or settimeofday or stime... clock_settime()
checking for BSD- or MS-compatible name lister (nm)... /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc-nm
checking the name lister (/home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to m68k-buildroot-linux-uclibc format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-ld option to reload object files... -r
checking for m68k-buildroot-linux-uclibc-objdump... /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-objdump
checking how to recognize dependent libraries... pass_all
checking for m68k-buildroot-linux-uclibc-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for m68k-buildroot-linux-uclibc-ar... (cached) /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc-ar
checking for archiver @FILE support... @
checking for m68k-buildroot-linux-uclibc-strip... (cached) /bin/true
checking for m68k-buildroot-linux-uclibc-ranlib... /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc-ranlib
checking command to parse /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc-nm output from /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for m68k-buildroot-linux-uclibc-mt... no
checking for mt... mt
configure: WARNING: using cross tools not prefixed with host triplet
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no
checking for /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC
checking if /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes
checking if /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc static flag -static works... yes
checking if /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc supports -c -o file.o... yes
checking if /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc supports -c -o file.o... (cached) yes
checking whether the /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-gcc linker (/home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/m68k-buildroot-linux-uclibc-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking if sntp will be built... no
checking for egrep... (cached) /bin/grep -E
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for sys/mman.h... yes
checking for sys/param.h... (cached) yes
checking for sys/poll.h... yes
checking for sys/procset.h... no
checking for sys/select.h... yes
checking for sys/socket.h... (cached) yes
checking for sys/stropts.h... no
checking for sys/time.h... (cached) yes
checking for sys/un.h... yes
checking for sys/wait.h... yes
checking for dlfcn.h... (cached) yes
checking for errno.h... (cached) yes
checking for fcntl.h... yes
checking for libgen.h... yes
checking for libintl.h... yes
checking for memory.h... yes
checking for netinet/in.h... (cached) yes
checking for setjmp.h... yes
checking for stdbool.h... yes
checking for sysexits.h... yes
checking for unistd.h... (cached) yes
checking for utime.h... yes
checking for stdarg.h... (cached) yes
checking for string.h... (cached) yes
checking for limits.h... yes
checking for inttypes.h... (cached) yes
checking for working stdnoreturn.h... yes
checking for runetype.h... no
checking for wchar.h... (cached) yes
checking for wchar_t... yes
checking for wint_t... yes
checking for int8_t... yes
checking for uint8_t... yes
checking for int16_t... yes
checking for uint16_t... yes
checking for int32_t... yes
checking for uint32_t... yes
checking for intptr_t... yes
checking for uintptr_t... (cached) yes
checking for uint_t... no
checking for pid_t... (cached) yes
checking for size_t... (cached) yes
checking for ptrdiff_t... (cached) yes
checking size of char *... 4
checking size of int... (cached) 4
checking size of long... (cached) 4
checking size of short... (cached) 2
checking for pathfind in -lgen... no
checking for gettext in -lintl... yes
checking for working fork... (cached) yes
checking for working vfork... (cached) yes
checking for mmap... yes
checking for canonicalize_file_name... yes
checking for snprintf... (cached) yes
checking for strdup... yes
checking for strchr... yes
checking for strrchr... yes
checking for strsignal... yes
checking for fchmod... yes
checking for fstat... yes
checking for chmod... yes
checking for a sed that does not truncate output... (cached) /bin/sed
configure: Using supplied libopts tearoff
checking whether a reg expr header is specified... no
checking whether with-libregex was specified... no
checking whether with-libregex-cflags was specified... no
checking whether with-libregex-libs was specified... no
checking whether libregex functions properly... no
checking whether pathfind(3) works... no
checking whether /dev/zero is readable device... crw-rw-rw- 1 root root 1, 5 Nov 26 18:33 /dev/zero
checking whether we have a functional realpath(3C)... no
checking whether strftime() works... no
checking whether fopen accepts "b" mode... no
checking whether fopen accepts "t" mode... no
checking whether not wanting optional option args... yes
checking for m68k-buildroot-linux-uclibc-pkg-config... /home/buildroot/autobuild/instance-2/output-1/per-package/ntp/host/bin/pkg-config
checking if pkg-config is at least version 0.15.0... yes
checking if libevent 2 or later is installed... yes, version 2.1.12-stable
checking for library containing openlog... none required
checking for netdb.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for syslog.h... yes
checking for sysexits.h... (cached) yes
checking for facilitynames in syslog.h... yes
checking for _Bool... yes
checking for stdbool.h that conforms to C99... (cached) yes
checking pkg-config for openssl... yes, version 1.1.1q
checking if we will use crypto... yes
checking for openssl/cmac.h... yes
checking for openssl/hmac.h... yes
checking for EVP_MD_do_all_sorted... yes
checking for struct sockaddr_storage... yes
checking for sockaddr_storage.__ss_family... no
checking for in_port_t... yes
checking type of socklen arg for getsockname()... socklen_t
checking struct sockaddr for sa_len... no
checking for IPv6 structures... yes
checking for Kame IPv6 support... no
checking for in6_pktinfo... yes
checking for sockaddr_in6.sin6_scope_id... yes
checking for in6addr_any... yes
checking for struct if_laddrconf... no
checking for struct if_laddrreq... no
checking for multicast IP support... yes
checking arg type needed for setsockopt() IP*_MULTICAST_LOOP... u_int
checking for getifaddrs... yes
checking for if_nametoindex... yes
checking for socket... yes
checking for ruby... no
checking if we want to enable tests with undiagnosed problems... yes
checking if we can run test-kodDatabase... yes
checking if we can run test-kodFile... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libopts/Makefile
config.status: creating Makefile
config.status: creating include/Makefile
config.status: creating scripts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/fileHandlingTest.h
config.status: creating unity/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make: Leaving directory '/home/buildroot/autobuild/instance-2/buildroot'