/usr/bin/gcc -L/home/buildroot/autobuild/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-3/output-1/host/lib unsquashfs.o unsquash-1.o unsquash-2.o unsquash-3.o unsquash-4.o unsquash-123.o unsquash-34.o unsquash-1234.o unsquash-12.o swap.o compressor.o unsquashfs_info.o gzip_wrapper.o lzma_xz_wrapper.o xz_wrapper.o lzo_wrapper.o lz4_wrapper.o zstd_wrapper.o read_xattrs.o unsquashfs_xattr.o -lpthread -lm -lz -llzma -llzma -llzo2 -llz4 -lzstd -o unsquashfs ln -sf unsquashfs sqfscat make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-squashfs-4.5.1/squashfs-tools' >>> host-squashfs 4.5.1 Installing to host directory PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-3/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-3/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-3/output-1/host/share/pkgconfig" /usr/bin/make -j4 XATTR_SUPPORT=1 XZ_SUPPORT=1 GZIP_SUPPORT=1 LZ4_SUPPORT=1 LZO_SUPPORT=1 LZMA_XZ_SUPPORT=1 ZSTD_SUPPORT=1 -C /home/buildroot/autobuild/instance-3/output-1/build/host-squashfs-4.5.1/squashfs-tools/ INSTALL_DIR=/home/buildroot/autobuild/instance-3/output-1/host/bin INSTALL_MANPAGES_DIR="" install make[1]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-squashfs-4.5.1/squashfs-tools' mkdir -p /home/buildroot/autobuild/instance-3/output-1/host/bin cp mksquashfs /home/buildroot/autobuild/instance-3/output-1/host/bin cp unsquashfs /home/buildroot/autobuild/instance-3/output-1/host/bin ln -fs unsquashfs /home/buildroot/autobuild/instance-3/output-1/host/bin/sqfscat ln -fs mksquashfs /home/buildroot/autobuild/instance-3/output-1/host/bin/sqfstar ../generate-manpages/install-manpages.sh /home/buildroot/autobuild/instance-3/output-1/build/host-squashfs-4.5.1/squashfs-tools/.. "" ../generate-manpages/install-manpages.sh: Install path for manpages empty. Skipping manpage install make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-squashfs-4.5.1/squashfs-tools' rauc-1.8.tar.xz: OK (sha256: d233247c1763b1c56c851d0adef2094b7aa2fcd72decf524a8ac0419188e0978) >>> host-rauc 1.8 Extracting xzcat /home/buildroot/autobuild/instance-3/dl/rauc/rauc-1.8.tar.xz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8 -xf - >>> host-rauc 1.8 Patching >>> host-rauc 1.8 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8 -name $file); do cp support/gnuconfig/$file $i; done; done >>> host-rauc 1.8 Patching libtool patching file /home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8/build-aux/ltmain.sh Hunk #1 succeeded at 2786 (offset 99 lines). Hunk #2 succeeded at 4376 (offset 99 lines). Hunk #3 succeeded at 6671 (offset 117 lines). Hunk #4 succeeded at 6681 (offset 117 lines). Hunk #5 succeeded at 6974 (offset 117 lines). Hunk #6 succeeded at 7266 (offset 117 lines). Hunk #7 succeeded at 8241 (offset 129 lines). Hunk #8 succeeded at 10873 (offset 163 lines). >>> host-rauc 1.8 Configuring (cd /home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8/ && rm -rf config.cache; PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-3/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-3/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-3/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/home/buildroot/autobuild/instance-3/output-1/host/include" CFLAGS="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" CXXFLAGS="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-3/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl CFLAGS="-O2 -I/home/buildroot/autobuild/instance-3/output-1/host/include" LDFLAGS="-L/home/buildroot/autobuild/instance-3/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/instance-3/output-1/host/lib" CONFIG_SITE=/dev/null ./configure --prefix="/home/buildroot/autobuild/instance-3/output-1/host" --sysconfdir="/home/buildroot/autobuild/instance-3/output-1/host/etc" --localstatedir="/home/buildroot/autobuild/instance-3/output-1/host/var" --enable-shared --disable-static --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --disable-debug --with-xmlto=no --with-fop=no --disable-nls --disable-dependency-tracking --disable-network --disable-json --disable-service --without-dbuspolicydir --with-systemdunitdir=no ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking how to create a pax tar archive... gnutar checking whether to enable maintainer-specific portions of Makefiles... yes checking whether make supports nested variables... (cached) yes checking whether to enable debugging... no checking whether make supports the include directive... yes (GNU style) checking for gcc... /usr/bin/gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc accepts -g... yes checking for /usr/bin/gcc option to accept ISO C89... none needed checking whether /usr/bin/gcc understands -c and -o together... yes checking dependency style of /usr/bin/gcc... none checking how to run the C preprocessor... /usr/bin/cpp checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for a sed that does not truncate output... /bin/sed checking whether C compiler accepts -Werror=unknown-warning-option... no checking whether C compiler accepts -fno-strict-aliasing... yes checking whether C compiler accepts -Wall... yes checking whether C compiler accepts -Wextra... yes checking whether C compiler accepts -Wundef... yes checking whether C compiler accepts -Wnested-externs... yes checking whether C compiler accepts -Wwrite-strings... yes checking whether C compiler accepts -Wpointer-arith... yes checking whether C compiler accepts -Wmissing-declarations... yes checking whether C compiler accepts -Wmissing-prototypes... yes checking whether C compiler accepts -Wstrict-prototypes... yes checking whether C compiler accepts -Wredundant-decls... yes checking whether C compiler accepts -Wno-unused-parameter... yes checking whether C compiler accepts -Wno-missing-field-initializers... yes checking whether C compiler accepts -Wdeclaration-after-statement... yes checking whether C compiler accepts -Wformat=2... yes checking whether C compiler accepts -Wold-style-definition... yes checking whether C compiler accepts -Wcast-align... yes checking whether C compiler accepts -Wformat-nonliteral... yes checking whether C compiler accepts -Wformat-security... yes checking whether C compiler accepts -Wsign-compare... yes checking whether C compiler accepts -Wstrict-aliasing... yes checking whether C compiler accepts -Wshadow... yes checking whether C compiler accepts -Winline... yes checking whether C compiler accepts -Wpacked... yes checking whether C compiler accepts -Wmissing-format-attribute... yes checking whether C compiler accepts -Wmissing-noreturn... yes checking whether C compiler accepts -Winit-self... yes checking whether C compiler accepts -Wredundant-decls... (cached) yes checking whether C compiler accepts -Wmissing-include-dirs... yes checking whether C compiler accepts -Wunused-but-set-variable... yes checking whether C compiler accepts -Warray-bounds... yes checking whether C compiler accepts -Wimplicit-function-declaration... yes checking whether C compiler accepts -Wreturn-type... yes checking whether C compiler accepts -Wswitch-enum... yes checking whether C compiler accepts -Wswitch-default... yes checking whether C compiler accepts -Wno-error=unused-parameter... yes checking whether C compiler accepts -Wno-error=missing-field-initializers... yes checking whether C compiler accepts -Werror=unknown-warning-option... (cached) no checking whether the linker accepts -Wl,--no-as-needed... yes checking for gawk... (cached) gawk checking for a sed that does not truncate output... (cached) /bin/sed checking for gcc... (cached) /usr/bin/gcc checking whether we are using the GNU C compiler... (cached) yes checking whether /usr/bin/gcc accepts -g... (cached) yes checking for /usr/bin/gcc option to accept ISO C89... (cached) none needed checking whether /usr/bin/gcc understands -c and -o together... (cached) yes checking dependency style of /usr/bin/gcc... (cached) none checking for /usr/bin/gcc option to accept ISO C99... none needed checking for catchsegv... catchsegv checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... (cached) /bin/sed checking for fgrep... /bin/grep -F checking for ld used by /usr/bin/gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm checking the name lister (/usr/bin/nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... /usr/bin/ranlib checking command to parse /usr/bin/nm output from /usr/bin/gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if /usr/bin/gcc supports -fno-rtti -fno-exceptions... no checking for /usr/bin/gcc option to produce PIC... -fPIC -DPIC checking if /usr/bin/gcc PIC flag -fPIC -DPIC works... yes checking if /usr/bin/gcc static flag -static works... yes checking if /usr/bin/gcc supports -c -o file.o... yes checking if /usr/bin/gcc supports -c -o file.o... (cached) yes checking whether the /usr/bin/gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether to build with code coverage support... no checking whether to enable Valgrind on the unit tests... checking for valgrind... no yes checking pkg-config is at least version 0.9.0... yes checking for glib-2.0 >= 2.50 gio-2.0 gio-unix-2.0... yes checking for libnl-genl-3.0 >= 3.1... no checking linux/nbd-netlink.h usability... no checking linux/nbd-netlink.h presence... no checking for linux/nbd-netlink.h... no checking for openssl >= 1.1.1... yes checking linux/mmc/ioctl.h usability... yes checking linux/mmc/ioctl.h presence... yes checking for linux/mmc/ioctl.h... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-nls rauc 1.8 network: no streaming: no >>> host-rauc 1.8 Building PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-3/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-3/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-3/output-1/host/share/pkgconfig" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8/ make[1]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8' GEN rauc-installer-generated.c /usr/bin/make --no-print-directory all-am CC librauc_la-rauc-installer-generated.lo GEN data/rauc-service.sh GEN data/de.pengutronix.rauc.service GEN data/rauc.service CC src/rauc-main.o CC src/librauc_la-bootchooser.lo CC src/librauc_la-bundle.lo CC src/librauc_la-checksum.lo CC src/librauc_la-config_file.lo CC src/librauc_la-context.lo CC src/librauc_la-crypt.lo CC src/librauc_la-dm.lo CC src/librauc_la-hash_index.lo CC src/librauc_la-install.lo CC src/librauc_la-manifest.lo CC src/librauc_la-mark.lo CC src/librauc_la-mbr.lo CC src/librauc_la-mount.lo CC src/librauc_la-service.lo CC src/librauc_la-signature.lo CC src/librauc_la-slot.lo CC src/librauc_la-stats.lo In file included from /home/buildroot/autobuild/instance-3/output-1/host/include/openssl/asn1.h:16:0, from src/signature.c:1: src/signature.c: In function 'get_cert_time': /home/buildroot/autobuild/instance-3/output-1/host/include/openssl/bio.h:482:34: warning: value computed is not used [-Wunused-value] # define BIO_set_close(b,c) (int)BIO_ctrl(b,BIO_CTRL_SET_CLOSE,(c),NULL) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/signature.c:911:2: note: in expansion of macro 'BIO_set_close' BIO_set_close(mem, BIO_CLOSE); ^~~~~~~~~~~~~ src/signature.c: In function 'asn1_time_to_tm': /home/buildroot/autobuild/instance-3/output-1/host/include/openssl/bio.h:482:34: warning: value computed is not used [-Wunused-value] # define BIO_set_close(b,c) (int)BIO_ctrl(b,BIO_CTRL_SET_CLOSE,(c),NULL) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/signature.c:1095:2: note: in expansion of macro 'BIO_set_close' BIO_set_close(mem, BIO_CLOSE); ^~~~~~~~~~~~~ CC src/librauc_la-utils.lo CC src/librauc_la-update_handler.lo CC src/librauc_la-verity_hash.lo CC src/librauc_la-emmc.lo CC test/fakerand.o CCLD test/fakerand CCLD librauc.la CCLD rauc make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8' >>> host-rauc 1.8 Installing to host directory PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" PKG_CONFIG="/home/buildroot/autobuild/instance-3/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/home/buildroot/autobuild/instance-3/output-1/host/lib/pkgconfig:/home/buildroot/autobuild/instance-3/output-1/host/share/pkgconfig" /usr/bin/make -j4 install -C /home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8/ make[1]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8' /usr/bin/make --no-print-directory install-am /bin/mkdir -p '/home/buildroot/autobuild/instance-3/output-1/host/bin' /bin/mkdir -p 'no' /bin/mkdir -p '/home/buildroot/autobuild/instance-3/output-1/host/share/man/man1' /bin/bash ./libtool --mode=install /usr/bin/install -c rauc '/home/buildroot/autobuild/instance-3/output-1/host/bin' /usr/bin/install -c -m 644 data/de.pengutronix.rauc.conf 'no' /usr/bin/install -c -m 644 rauc.1 '/home/buildroot/autobuild/instance-3/output-1/host/share/man/man1' /bin/mkdir -p '/home/buildroot/autobuild/instance-3/output-1/host/libexec' /bin/mkdir -p 'no' /usr/bin/install -c -m 644 data/rauc.service 'no' /usr/bin/install -c data/rauc-service.sh '/home/buildroot/autobuild/instance-3/output-1/host/libexec' libtool: install: /usr/bin/install -c rauc /home/buildroot/autobuild/instance-3/output-1/host/bin/rauc make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/host-rauc-1.8' tini-0.19.0.tar.gz: OK (sha256: 0fd35a7030052acd9f58948d1d900fe1e432ee37103c5561554408bdac6bbf0d) >>> tini 0.19.0 Extracting gzip -d -c /home/buildroot/autobuild/instance-3/dl/tini/tini-0.19.0.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-3/output-1/build/tini-0.19.0 -xf - >>> tini 0.19.0 Patching >>> tini 0.19.0 Configuring printf "#pragma once\n" > /home/buildroot/autobuild/instance-3/output-1/build/tini-0.19.0/src/tiniConfig.h >>> tini 0.19.0 Building mkdir -p /home/buildroot/autobuild/instance-3/output-1/build/tini-0.19.0/bin /home/buildroot/autobuild/instance-3/output-1/host/bin/mips-buildroot-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_FORTIFY_SOURCE=1 -static -DTINI_VERSION=\"0.19.0\" -DTINI_GIT=\"\" -o /home/buildroot/autobuild/instance-3/output-1/build/tini-0.19.0/bin/tini /home/buildroot/autobuild/instance-3/output-1/build/tini-0.19.0/src/tini.c >>> tini 0.19.0 Installing to target /usr/bin/install -D -m 0755 /home/buildroot/autobuild/instance-3/output-1/build/tini-0.19.0/bin/tini /home/buildroot/autobuild/instance-3/output-1/target/usr/bin/tini ln -sf tini /home/buildroot/autobuild/instance-3/output-1/target/usr/bin/docker-init ux500-firmware_1.1.3-6linaro1.tar.gz: OK (sha256: 81633274a9157c076e5e09b5addd81fbcef504b829fc801041cea50eea774bcd) >>> ux500-firmware 1.1.3-6 Extracting gzip -d -c /home/buildroot/autobuild/instance-3/dl/ux500-firmware/ux500-firmware_1.1.3-6linaro1.tar.gz | tar --strip-components=1 -C /home/buildroot/autobuild/instance-3/output-1/build/ux500-firmware-1.1.3-6 -xf - >>> ux500-firmware 1.1.3-6 Patching >>> ux500-firmware 1.1.3-6 Configuring >>> ux500-firmware 1.1.3-6 Building >>> ux500-firmware 1.1.3-6 Installing to target PATH="/home/buildroot/autobuild/instance-3/output-1/host/bin:/home/buildroot/autobuild/instance-3/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" /usr/bin/make -j4 -C /home/buildroot/autobuild/instance-3/output-1/build/ux500-firmware-1.1.3-6 DESTDIR=/home/buildroot/autobuild/instance-3/output-1/target install make[1]: Entering directory '/home/buildroot/autobuild/instance-3/output-1/build/ux500-firmware-1.1.3-6' install -d /home/buildroot/autobuild/instance-3/output-1/target/lib/firmware/cw1200 install -m 0666 *.bin *.fw /home/buildroot/autobuild/instance-3/output-1/target/lib/firmware install -m 0666 cw1200/*.bin /home/buildroot/autobuild/instance-3/output-1/target/lib/firmware/cw1200 make[1]: Leaving directory '/home/buildroot/autobuild/instance-3/output-1/build/ux500-firmware-1.1.3-6' for f in /home/buildroot/autobuild/instance-3/output-1/target/lib/firmware/CG2900* ; do mv $f ${f/CG2900/CG29XX}; done >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/buildroot/autobuild/instance-3/output-1/host/etc/meson sed -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_LDFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=1'@PKG_TARGET_CXXFLAGS@%g" -e "s%@TARGET_FCFLAGS@%'-O3', '-g0'@PKG_TARGET_FCFLAGS@%g" -e "s%@TARGET_CC@%/home/buildroot/autobuild/instance-3/output-1/host/bin/mips-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/instance-3/output-1/host/bin/mips-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%mips%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%%g" -e "s%@TARGET_CFLAGS@%%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/instance-3/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/instance-3/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/instance-3/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/instance-3/output-1/host/mips-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/instance-3/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/instance-3/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@TARGET_CC@%/home/buildroot/autobuild/instance-3/output-1/host/bin/mips-buildroot-linux-gnu-gcc%g" -e "s%@TARGET_CXX@%/bin/false%g" -e "s%@TARGET_AR@%/home/buildroot/autobuild/instance-3/output-1/host/bin/mips-buildroot-linux-gnu-gcc-ar%g" -e "s%@TARGET_FC@%/bin/false%g" -e "s%@TARGET_STRIP@%/bin/true%g" -e "s%@TARGET_ARCH@%mips%g" -e "s%@TARGET_CPU@%%g" -e "s%@TARGET_ENDIAN@%big%g" -e "s%@TARGET_FCFLAGS@%'-O3', '-g0'%g" -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@TARGET_LDFLAGS@%%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-O3', '-g0', '-D_FORTIFY_SOURCE=1'%g" -e "s%@BR2_CMAKE@%/home/buildroot/autobuild/instance-3/output-1/host/bin/cmake%g" -e "s%@PKGCONF_HOST_BINARY@%/home/buildroot/autobuild/instance-3/output-1/host/bin/pkgconf%g" -e "s%@HOST_DIR@%/home/buildroot/autobuild/instance-3/output-1/host%g" -e "s%@STAGING_DIR@%/home/buildroot/autobuild/instance-3/output-1/host/mips-buildroot-linux-gnu/sysroot%g" -e "s%@STATIC@%false%g" /home/buildroot/autobuild/instance-3/buildroot/support/misc/cross-compilation.conf.in > /home/buildroot/autobuild/instance-3/output-1/host/etc/meson/cross-compilation.conf rm -f /home/buildroot/autobuild/instance-3/output-1/target/usr/share/glib-2.0/schemas/*.xml /home/buildroot/autobuild/instance-3/output-1/target/usr/share/glib-2.0/schemas/*.dtd /home/buildroot/autobuild/instance-3/output-1/host/bin/glib-compile-schemas /home/buildroot/autobuild/instance-3/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/share/glib-2.0/schemas --targetdir=/home/buildroot/autobuild/instance-3/output-1/target/usr/share/glib-2.0/schemas Warning: Schema ?org.gnome.crypto.pgp? has path ?/desktop/gnome/crypto/pgp/?. Paths starting with ?/apps/?, ?/desktop/? or ?/system/? are deprecated. grep -qsE '^/bin/mksh$' /home/buildroot/autobuild/instance-3/output-1/target/etc/shells || echo "/bin/mksh" >> /home/buildroot/autobuild/instance-3/output-1/target/etc/shells mkdir -p /home/buildroot/autobuild/instance-3/output-1/target/etc echo "buildroot" > /home/buildroot/autobuild/instance-3/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/buildroot/autobuild/instance-3/output-1/target/etc/hosts mkdir -p /home/buildroot/autobuild/instance-3/output-1/target/etc echo "Welcome to Buildroot" > /home/buildroot/autobuild/instance-3/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root:"*":, /home/buildroot/autobuild/instance-3/output-1/target/etc/shadow grep -qsE '^/bin/sh$' /home/buildroot/autobuild/instance-3/output-1/target/etc/shells || echo "/bin/sh" >> /home/buildroot/autobuild/instance-3/output-1/target/etc/shells ln -sf mksh /home/buildroot/autobuild/instance-3/output-1/target/bin/sh /bin/sed -i -e '/^root:/s,[^/]*$,mksh,' /home/buildroot/autobuild/instance-3/output-1/target/etc/passwd rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/include /home/buildroot/autobuild/instance-3/output-1/target/usr/share/aclocal \ /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/pkgconfig /home/buildroot/autobuild/instance-3/output-1/target/usr/share/pkgconfig \ /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/cmake /home/buildroot/autobuild/instance-3/output-1/target/usr/share/cmake \ /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/rpm /home/buildroot/autobuild/instance-3/output-1/target/usr/doc find /home/buildroot/autobuild/instance-3/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/buildroot/autobuild/instance-3/output-1/target/lib/ /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/ /home/buildroot/autobuild/instance-3/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/share/gdb rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/share/bash-completion rm -rf /home/buildroot/autobuild/instance-3/output-1/target/etc/bash_completion.d rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/share/zsh rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/man /home/buildroot/autobuild/instance-3/output-1/target/usr/share/man rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/info /home/buildroot/autobuild/instance-3/output-1/target/usr/share/info rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/doc /home/buildroot/autobuild/instance-3/output-1/target/usr/share/doc rm -rf /home/buildroot/autobuild/instance-3/output-1/target/usr/share/gtk-doc rmdir /home/buildroot/autobuild/instance-3/output-1/target/usr/share 2>/dev/null || true rm -rf /home/buildroot/autobuild/instance-3/output-1/target/lib/debug /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/debug find /home/buildroot/autobuild/instance-3/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /bin/true 2>/dev/null || true find /home/buildroot/autobuild/instance-3/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /bin/true 2>/dev/null || true test -f /home/buildroot/autobuild/instance-3/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/buildroot/autobuild/instance-3/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/buildroot/autobuild/instance-3/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2022.05-2814-g93d982207b"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2023.02-git"; \ echo "PRETTY_NAME=\"Buildroot 2023.02-git\"" \ ) > /home/buildroot/autobuild/instance-3/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/buildroot/autobuild/instance-3/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/buildroot/autobuild/instance-3/output-1/per-package /home/buildroot/autobuild/instance-3/buildroot/support/scripts/fix-rpath target touch /home/buildroot/autobuild/instance-3/output-1/target/usr ln -snf /home/buildroot/autobuild/instance-3/output-1/host/mips-buildroot-linux-gnu/sysroot /home/buildroot/autobuild/instance-3/output-1/staging make: Leaving directory '/home/buildroot/autobuild/instance-3/buildroot' make: Entering directory '/home/buildroot/autobuild/instance-3/buildroot' >>> Buildroot 2022.05-2814-g93d982207b Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-buildroot Collecting legal info >>> host-gcc-final 11.3.0 Collecting legal info >>> glibc 2.36-66-ga1dc0be03c9dd850b864bd7a9c03cf8e396eb7ca Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) LICENSES: OK (sha256: b33d0bd9f685b46853548814893a6135e74430d12f6d94ab3eba42fc591f83bc) >>> host-bison 3.8.2 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-m4 1.4.19 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> host-skeleton Collecting legal info >>> host-gawk 5.2.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-gcc-initial 11.3.0 Collecting legal info >>> host-binutils 2.39 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-gmp 6.2.1 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-mpc 1.2.1 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.1.0 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> linux-headers 5.10.158 Collecting legal info >>> skeleton Collecting legal info >>> skeleton-init-none Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> gcr 3.40.0 Collecting legal info COPYING: OK (sha256: 94b03f1a60a7fd5007149530626a895a6ef5a8b9342abfd56860c5f3956f5d23) >>> host-meson 0.64.1 Collecting legal info COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30) >>> host-ninja 1.11.1.g95dee.kitware.jobserver-1 Collecting legal info COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea) >>> host-cmake 3.22.3 Collecting legal info Copyright.txt: OK (sha256: f1a4326266aada65b307dac05161a9d02d3dba4fb08b50cb26e3c24cc8a86e97) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> host-python-setuptools 65.6.3 Collecting legal info LICENSE: OK (sha256: db3f0246b1f9278f15845b99fec478b8b506eb76487993722f8c6e254285faf8) >>> host-python3 3.11.1 Collecting legal info LICENSE: OK (sha256: d4a223f033419313218c9b8444167e91e87a5bebdb43fb8490df441df5220a8b) >>> host-autoconf 2.71 Collecting legal info COPYINGv3: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) COPYING.EXCEPTION: OK (sha256: 1f1cde9fb68b9b3cff18c420894bec5bd4defacd700b7d13df54a887301e5350) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-autoconf-archive 2022.09.03 Collecting legal info COPYING: OK (sha256: e6037104443f9a7829b2aa7c5370d0789a7bda3ca65a0b904cdc0c2e285d9195) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-automake 1.16.5 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-expat 2.5.0 Collecting legal info COPYING: OK (sha256: 122f2c27000472a201d337b9b31f7eb2b52d091b02857061a8880371612d9534) >>> host-libffi 3.4.4 Collecting legal info LICENSE: OK (sha256: 2c9c2acb9743e6b007b91350475308aee44691d96aa20eacef8e199988c8c388) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.13 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> libgcrypt 1.10.1 Collecting legal info COPYING.LIB: OK (sha256: ca0061fc1381a3ab242310e4b3f56389f28e3d460eb2fd822ed7a21c6f030532) >>> libgpg-error 1.45 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) >>> libglib2 2.72.3 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-libglib2 2.72.3 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-gettext Collecting legal info >>> host-gettext-tiny 0.3.2 Collecting legal info LICENSE: OK (sha256: 4c938aa3d8fa3c184bba5e87a8a2febc89560627c9d0567536879e3eca1a7b4f) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-pcre 8.45 Collecting legal info LICENCE: OK (sha256: 51b3dea44f63338b84b9c97b3d793826a8397309068cf9379a423216ab8ea5b2) >>> host-util-linux 2.38 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> libffi 3.4.4 Collecting legal info LICENSE: OK (sha256: 2c9c2acb9743e6b007b91350475308aee44691d96aa20eacef8e199988c8c388) >>> pcre 8.45 Collecting legal info LICENCE: OK (sha256: 51b3dea44f63338b84b9c97b3d793826a8397309068cf9379a423216ab8ea5b2) >>> zlib Collecting legal info >>> libzlib 1.2.13 Collecting legal info LICENSE: OK (sha256: 845efc77857d485d91fb3e0b884aaa929368c717ae8186b66fe1ed2495753243) >>> p11-kit 0.24.1 Collecting legal info COPYING: OK (sha256: 2e1ba993904df807a10c3eda1e5c272338edc35674b679773a8b3ad460731054) >>> gnupg2 2.3.8 Collecting legal info COPYING: OK (sha256: bc2d6664f6276fa0a72d57633b3ae68dc7dcb677b71018bf08c8e93e509f1357) >>> libassuan 2.5.5 Collecting legal info COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861) COPYING: OK (sha256: fc82ca8b6fdb18d4e3e85cfd8ab58d1bcd3f1b29abe782895abd91d64763f8e7) >>> libksba 1.6.2 Collecting legal info AUTHORS: OK (sha256: 8f1b87e551d97b2b23b6d3403a5d598c63ea89824cb8ee351f631f6cab2beaa5) COPYING: OK (sha256: 6197b98c6bf69838c624809c509d84333de1bc847155168c0e84527446a27076) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 0abbff814cd00e2b0b6d08395af2b419c1a92026c4b4adacbb65ccda45fa58cf) COPYING.LGPLv3: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> libnpth 1.6 Collecting legal info COPYING.LIB: OK (sha256: ce64d5f7b49ea6d80fdb6d4cdee6839d1a94274f7493dc797c3b55b65ec8e9ed) >>> libarchive 3.6.1 Collecting legal info COPYING: OK (sha256: b2cdf763345de2de34cebf54394df3c61a105c3b71288603c251f2fa638200ba) >>> lsuio 0.2.0 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> mksh 59c Collecting legal info mksh.1: OK (sha256: abf44a61ec777c98f8ae7e08e4fe25fe258e0c470215e2eeb22816f6bae72c80) >>> most 5.2.0 Collecting legal info COPYING: OK (sha256: 1b2a567f289f66a143c56353e7b3d4fa5862514a5e3c5cfdf8b02ee5e5aaa953) COPYRIGHT: OK (sha256: 3d8f860532c9f202db9300375fb29a1e7b32f538c6033e7013266ad55317fc3e) >>> slang 2.3.3 Collecting legal info COPYING: OK (sha256: ff05a90962e7773f8bdc47b2a9585130526039102759b524c1dffbd57cfe469b) >>> msmtp 1.8.22 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> opkg 0.4.5 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> opus 1.3.1 Collecting legal info COPYING: OK (sha256: 8338ce8d922bb4416ce3dd1e5680173332435e3f0755007ac7801ccd674fe682) >>> host-patchelf 0.13 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-rauc 1.8 Collecting legal info COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-openssl Collecting legal info >>> host-libopenssl 1.1.1q Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> host-squashfs 4.5.1 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-lz4 1.9.4 Collecting legal info lib/LICENSE: OK (sha256: 8b58c446121a109ccf32edc094bba3010a3d85e4ee3702950db55e4d3e87736c) programs/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-lzo 2.10 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-xz 5.2.7 Collecting legal info COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c) COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-zstd 1.5.2 Collecting legal info LICENSE: OK (sha256: 2c1a7fa704df8f3a606f6fc010b8b5aaebf403f3aeec339a12048f1ba7331a0b) COPYING: OK (sha256: f9c375a1be4a41f7b70301dd83c91cb89e41567478859b77eef375a52d782505) >>> tini 0.19.0 Collecting legal info LICENSE: OK (sha256: e5f46bca81266bdd511cf08018d66866870531794569c04f9b45f50dd23c28b0) >>> ux500-firmware 1.1.3-6 Collecting legal info license.txt: OK (sha256: b5bbc3fb3ff2f8e165b3bf60b25702d8970b3d7fe88b1c883f20615d550a7cb2) WARNING: the Buildroot source code has not been saved WARNING: gcc-final-11.3.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-11.3.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) WARNING: linux-headers-5.10.158: cannot save license (LINUX_HEADERS_LICENSE_FILES not defined) Legal info produced in /home/buildroot/autobuild/instance-3/output-1/legal-info make: Leaving directory '/home/buildroot/autobuild/instance-3/buildroot'